2003.5 Peugeot 307 SW phone

29-09-2003









  
 The satellite navigation system guides you, by means of 

!
!! (graphics), to
your chosen destination. The heart of the system lies in the use of a map data base and "
# $
"!%
&!'() . With
this system you can fix the positionof your vehicle by means of a satellitenetwork. The system uses the following elements:
– the CD-Rom drive,
– the configuration CD-Rom
– the navigation CD-Rom,
– the last voice message recall control,
– the control keypad,
– the CT monochrome screen or the DT colour screen. *'
+
,(
'
This is part of the RT3 GPS audio/telephone. -.
Ejection button on CD-Rom.
. CD-Rom housing.
*'
%
+
,(This contains all the map data. It must be inserted in the drive, printed face upwards.
Use only CD-Roms approved by PEUGEOT.
*'
!
'
('!!%'
'
 . Pressing for more than two seconds on the button at the end of the lights stalk repeats the last voice information.
Certain functions or services
described may vary depending on the version of CD-Rom or the
country where the vehicle is sold.
For safety reasons, the inputting of navigationinformation by the drivermust be carried out when
the vehicle is stationary.

29-09-2003







5
Select the Navigation/Guidance icon using the dial , then validate by
pressing the dial to access the main
1%
,
'1 menu.
''
('
Switch on the RT3 GPS audio/tele- phone and insert the navigation CD-Rom. Press the 11button to access
the %''
(' .
During guidance, if the navigation CD-Rom is present, the screen displays dif- ferent information depending on the manoeuvres to be carried out. -. Current manoeuvre or compass or course (if calculation in progress or zone not mapped).
. Next manoeuvre to be carried out.
. Next road to be taken.
5. Current road.
6. Estimated time of arrival at destination.
7. Distance to final destination.
. Distance to next manoeuvre.
'!0

– depending on the situation of the vehicle and on the reception of GPS infor- mation, this information may disappear from the screen temporarily,
– during guidance, the navigation CD ROM must remain in the RT3 GPS audio/telephone.
''
'!

*'
!2 &
*('
!''
+ + 
!''



29-09-2003






D
The menu CC'
2!CC
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
'
2!
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
1:1
function then confirm by pressing thedial.
?!%
*'
'
!&*'!!' Select the type of voice 1( '1or
1/'( '1 , after inserting the configu-
ration CD-Rom. Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial. '0
the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. %'('
/
*'
'& This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
1'('1 function, then
confirm by pressing the dial. Select the 1:1function, then confirm
by pressing the dial to record the changes made.
22%E'!(%
%'
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination pro-grammed. '0
after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
+  
'