29-09-2003
B
Select the CC
' &CC function to
access the file in which the address you are looking for is archived. Select a description by scrolling down the list by means of the dial,then confirm by pressing the dial.The directory file is then displayed. Select the 1:1function, then press
the dial to access the guidance acti- vation function.
> 8*' ' !% '$&*' !&!'(.
' ' % '! !'
*' ' &
Select the
1"' ! '! !1
function to access one of the last twenty addresses stored. Select a description by scrolling down the list by means of the dial,then confirm it by pressing the dial.The complete address is then dis-played. Select the 1:1function, then press
the dial to access the guidance acti- vation function.
> 8 *' ! ! % ' $&
*'!&!'(.
' ' / ' / *' ! ''! !Activate the function
CC
''CC,
then input the distance involved in the change required. Select the ' C:CCfunction then validate
by pressing the dial.The system calculates the change which is closest to the value inputand gives you the option of whetheror not to use this change.
' !/*''
You can consult the destination address at any time by activating the
1+*!' '! 1 function on
the 1 % , '1 menu.
+* % %*' '
29-09-2003
3 This provides two types of protection: Ðexterior protection: it sounds if a
door, the boot or the bonnet is opened.
Ð interior protection: it sounds if
the volume inside the passengercompartment changes (breaking ofa window or a movement insidethe vehicle).
-
(* Switch off the ignition and get out of the vehicle.
Set the alarm, by locking ordeadlocking using the remotecontrol (button indicator light
flashes once per second).
/ if you wish to lock your vehicle
without setting the alarm, use thedoor lock. When the alarm is triggered, thesiren sounds and the direction indi-cator lights flash for thirty seconds. After triggering, the alarm remains set.
#( -/
if the alarm has been
triggered ten times in succession, on the eleventh time it becomesinactive. / if button indicator light flash-
es rapidly, the alarm has been trig- gered while you were away fromyour vehicle.
(* - Unlock the vehicle with the remote control key (button indicator light
goes out). / if the alarm has been triggered
while you were away from your vehi- cle, the rapid flashing of the indicatorlight will stop when you switch on theignition.
(*
)( (
(' . If, while you are away from the vehi- cle, you wish to leave a window par-tially open or a pet inside the vehicle,you should choose exterior protec-
tion only. Switch off the ignition,
In the next ten seconds, press button until the indicator light is
on continuously,
Get out of the vehicle,
Set the alarm by locking or dead-locking using the remote control(button indicator light flashes
once a second).
/ when the alarm is set but the
remote control does not operate: Unlock the doors with the key
and open the door. The alarm istriggered.
Switch on the ignition. The alarmis disarmed.
'(('
( When the ignition is switched on, if button lights for ten seconds, there
is a fault in the siren connection.
Contact a PEUGEOT dealer to have the system checked.
0* '' , > The alarm is activated automatically two minutes after the last closure ofa door or the boot. In order to avoid accidental triggering of the alarm when a door or the bootis opened, it is essential to first pressthe unlocking button on the remotecontrol.
* According to destination.
!"#
$!?
