2003.5 Peugeot 307 Dag ESP

29-09-2003





 
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the 090function,
– input the details of your destination,
– automatically input the details of your current location by means of the 0*&
0 function.
!
&
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the 090function,
– fill in the 0
70and 0&&0
zones,
– automatically enter the name of your current location using the
0*&
0 function.
&&$

&& If you wish to be directed to a service, select the
&$%corresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the &&then confirm by
pressing the dial to access the
0!&
)&0 function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons 0?0and 0@0to consult the
list provided.When the establishment of your choice is displayed, you can:
 select the 090function to acti-
vate guidance towards this service,
 select the 0)&0function to enter
this establishment in your directo-
ry.

&/

if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.

29-09-2003





 C
The menu BB&
1 BB
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
&
1
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
090
function then confirm by pressing thedial.
> $
)&
&
%)&  & Select the type of voice 0'&0or
0.&'&0 , after inserting the configu-
ration CD-Rom.
Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial.
&/ the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. $&'&
.
)&
&% This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
0&'&0 function, then
confirm by pressing the dial.Select the 090function, then confirm
by pressing the dial to record the changes made.
11$D& '$
$&
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination programmed.
&/ after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
*
&

29-09-2003
sport programme
snow programme
 ark to  
 the vehicle or



 ,
with the handbrake on or off.
 everse to 
 (select this function with the vehicle
stationary, engine at idle).  eutral to



 and to 
, with the
handbrake on. 
if function is engaged inadvertently while
driving, allow the engine to return to idle before engaging function to accelerate.
 rive for  in automatic mode.
 anual for  in manual mode.



!"# $
%

&&
With the engine running, to move off from position :
 
















'


(
 select function ,  or , then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
You can also move off from position :
 release the handbrake, with yourfoot on the brake,
 select function ,  or , then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
)# * When the engine is at idle, brakes not applied, if function ,  or is select-
ed the vehicle moves even withoutthe accelerator being pressed. For this reason, 



+ ,

-
-




+ (
.


- .
When maintenance operations needto be carried out with the engine run-ning, apply the handbrake and selectposition .
/01!
" " 0
"!/
#"#" 0
*!#23














 




 










 








 



   
*


 +

  Move the lever in the gate to select a function. Once the function is selected, the corresponding indicator light appears on
the instrument panel display.

29-09-2003
"#0" 
0"$ 9#:
#
# 0
"#2 $ "
0"$ 9!: These systems are linked and com-
plement the ABS.
The ASR system optimises drive to prevent the wheels skidding, by act-ing on the brakes of the drive wheelsand on the engine. It also allows thedirectional stability of the vehicle tobe improved on acceleration. If there is a variation between the tra- jectory followed by the vehicle and
that required by the driver, the ESPsystem automatically acts on theengine and the brake of one or morewheels, in order to put the vehicleback on course.

++
When a malfunction of thesystems occurs, the switchlight flashes and the warninglight comes on, accompa-nied by an audible signal
and the message /!>#

&-+/ on the multifunction
display.
Contact a PEUGEOT dealer to have the system checked.



!"# $
%?



#>!
6

In exceptional conditions (starting a vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels canmove freely and regain grip. 
Press the /! ;;/ switch,
located on the central section of the fascia.
The switch lights up and thewarning light comes on: the
ASR and ESP systems aredisarmed.
"






  automatically if the ignition is
switched off,
 automatically above 30 mph (50 km/h),
 manually by pressing the switchagain.


&

#


!
6


The warning light flashes if
the ASR or ESP is activated.

 !"#
 























 











 
 



 





$






%

 &




 


 



'()









 
"







 




'()



29-09-2003
 +

&-+ Place switch %in the 0 ! posi-
tion. The cruise control is not yet active and no speed has been
memorised. The display indicates:
.+

&-+
&&  Place switch %in position or
$  " to switch the system off.
#+
>




 As soon as you reach the chosen speed, press button 8or . This
memorises the speed, which will
be maintained automatically. Thedisplay indicates (e.g. at 80 mph(130 km/h)): 
It is possible to accelerate and
drive momentarily at a speed greater
than the memorised speed. Thevalue memorised flashes. When theaccelerator pedal is released, thevehicle will return to the memorisedspeed.
0 !
0"$>!! $  "!A
0-

+
&-+

this enables
the vehicle to maintain a steady speed
programmed by the driver, regardlessof the road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) with at least fourthgear engaged (second gear for theautomatic gearbox), .


- .
* During the year, according to engine.



!"# $
%B
0
+ 




 If you wish to cancel the memorised speed: Press button ?or the brake or clutch
pedal. The display indicates (e.g. at 80 mph (130 kmh)):

the speed memorised is can-
celled automatically if the vehiclespeed is less than 25 mph (40 kmh),or if the manual gearbox is in a gearlower than fourth (second gear forthe automatic gearbox) or if the ESPis activated.
+





 After cancellation, press button ?.
Your vehicle will return to the last
memorised speed. The display indi-cates (e.g. at 80 mph (130 km/h)):