Page 70 of 75
3. Remove the drive chain. Thoroughly
clean the chain with solvent and lubri-
cate it. Reinstall the chain or store it in
a plastic bag (tied to frame for safe-
keeping).
4. Lubricate all control cables.
5. Block up the frame to raise both
wheels off the ground.
6. Tie a plastic bag over the exhaust pipe
outlet to prevent moisture from enter-
ing.
7. If storing in a humid or salt-air atmos-
phere, coat all exposed metal surfaces
with a light film of oil. Do not apply oil
to any rubber parts or the seat cover.
8. Remove the battery and charge it.
Store it in a dry place and recharge it
once a month. Do not store the bat-
tery in an excessively warm or cold
place (less than 0°C (32°F) or more
than 30°C (86°F)).
EUU05800NOTE:
Make any necessary repairs before storing
the motorcycle.
70
5SD O/M-3 9/4/01 2:50 PM Page 70 (1,1)
Page 71 of 75
71
Model
Dimensions:
Overall length 1,890 mm
Overall width 670 mm
Overall height 1,055 mm
Seat height 770 mm
Wheelbase 1,210 mm
Minimum ground clearance 145 mm
Basic weight:
With oil and full fuel tank 99 kg
Minimum turning radius: 1,800 mm
Engine:
Type Air cooled 4 stroke, SOHC
Cylinder arrangement Forward inclined single cylinder
Displacement 101.8 cm
3
Bore
×stroke 49.0
×54.0 mm
Compression ratio 9.0 : 1
Starting system Electric and kick starter
Lubrication system: Wet sump
SPECIFICATIONS
5SD O/M-3 9/4/01 2:50 PM Page 71 (1,1)
Page 75 of 75
75
Model
Wheel travel:
Front 90 mm
Rear 66 mm
Electrical:
Ignition system DC. CDI
Generator system A.C. magneto
Battery type/capacity 12V5AH
Headlight type: Bulb type
Bulb wattage/quantity:
Headlight 12V25W/25W ×2
Tail/brake light 12V/5W/21W ×1
Flasher light 12V10W ×4
Meter light 14V3W ×1
Indicator light wattage/quantity:
High beam indicator light 12V1.7W ×1
Turn signal indicator light 12V1.7W ×1
Neutral indicator light 12V1.7W ×1
Gear position indicator light 12V1.7W ×4
5SD O/M-3 9/4/01 2:50 PM Page 75 (1,1)