2002 TOYOTA MR2 SPYDER light

02 MY MR2 SMT(U) L/O 0108
206
01 06 12
2002 MR2 (OM17493U)
SC73012
2. Remove the cover in the trunk.
Remove and install the cover clips as
shown in the following illustrations.
SC18005
Removing clips
SC18006
Installing clips
—Headlights
SB73043
1. Unplug the connector. Remove the rubber cover.
If the connector is tight, wiggle it.

02 MY MR2 SMT(U) L/O 0108
207
01 06 12
2002 MR2 (OM17493U)
SB73044
2. Release the bulb retaining springand remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
SB73075
3. Install the rubber cover as shown and snuggle on the boss. Plug in the
connector.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
—Parking lights
SB73046
SB73047

02 MY MR2 SMT(U) L/O 0108
208
01 06 12
2002 MR2 (OM17493U)
—Front turn signal lights
SB73048
SB73049
—Front side marker lights
SB73071
Phillipshead screw: Use a phillips head
screwdriver.
SB73072
SB73073

02 MY MR2 SMT(U) L/O 0108
209
01 06 12
2002 MR2 (OM17493U)
SB73074SB73019SB73065
a: Backup light
b: Rear turn signal light
c: Stop/tail light
d: Stop light
CAUTION
Be careful when you work in the area
around the engine after driving in or-
der to prevent burning yourself. The
engine hood, the support rod, or sur-
rounding area could be hot after driv-
ing.
—Rear turn signal, stop/tail,
stop and backup lights

02 MY MR2 SMT(U) L/O 0108
210
01 06 12
2002 MR2 (OM17493U)
—License plate lights
SB73021
SB73022
SB73023
—High mounted stop light
SB73062
SB73052

02 MY MR2 SMT(U) L/O 0108
215
01 06 12
2002 MR2 (OM17493U)
Service specifications
ENGINE
Valve clearance (engine cold), mm (in.):Intake 0.15—0.25 (0.006—0.010)
Exhaust 0.25—0.35 (0.010—0.014)
Spark plug type: DENSO SK16R11
NGK IFR5A11
Spark plug gap, mm (in.): 1.1 (0.043) ENGINE LUBRICATION
  \f\b \b \f
!
" #! $ #%
With filter 3.7 (3.9, 3.3)
Without filter 3.5 (3.7, 3.1)
Oil grade: API grade SJ “EnergyConserving”, SL
“EnergyConserving” or ILSAC multi-
grade engine oil is recommended.
Recommended oil viscosity (SAE):COOLING SYSTEM
Total capacity, L (qt., Imp. qt.): 10.4 (11.0, 9.2)
Coolant type: “TOYOTA Long Life Coolant” or equiva-
lent
With ethyleneglycol type coolant for a
proper corrosion protection of aluminum
components
Do not use alcohol type antifreeze or
plain water alone.
BATTERY
Open voltage
∗ at 20 °C (68 °F):
12.6—12.8 V Fully charged
12.2—12.4 V Half charged
11.8—12.0 V Discharged
∗: Voltage that is checked 20 minutes af-
ter the key is removed with all the lights
turned off
Charging rates: 5 A max.

02 MY MR2 SMT(U) L/O 0108
219
01 06 12
2002 MR2 (OM17493U)
Fuses
SB73067
Trunk room
Fuses (type A)1. 30 A: Spare fuse
2. 15 A: Spare fuse
3. 20 A: Spare fuse
4. RDI FAN 30 A: Electric cooling fans
5. ABS1 20 A: Antilock brake system
6. CDS FAN 30 A: Electric cooling fans
SB73025
Trunk room
7. HEAD LH UPR 10 A: Lefthand
headlight (high beam)
8. HEAD RH UPR 10 A: Righthand
headlight (high beam)
9. HEAD LH LWR 10 A: Lefthand
headlight (low beam)
10. HEAD RH LWR 10 A: Righthand
headlight (low beam)
11. WASHER 10 A: Windshield wiper and
washer
12. HTR 10 A: Air conditioning system
SB73026
Instrument panel
13. WIPER 20 A: Windshield wiper and
washer
14. ECUIG 7.5 A: Power Steering system,
antilock brake system
15. FANIG 7.5 A: Electric cooling fans
16. TURN 7.5 A: Turn signal lights,
emergency flashers
17. GAUGE 7.5 A: Power window system,
gauges and meters, backup lights,
charging system, rear window defogger
system
18. SRS 7.5 A: SRS airbag system
19. DEF 25 A: Rear window defogger
system

02 MY MR2 SMT(U) L/O 0108
220
01 06 12
2002 MR2 (OM17493U)
SB73068
Engine compartment
20. OBD 7.5 A: Onboard diagnosis
system
21. AM1 7.5 A: “GAUGE” “ACC” “TURN”
“ECUIG” “WIPER” “WASHER” “SRS”
“HTR 10A” “FANIG” fuses
22. ACC 25 A: “RADIO2” “CIG” fuses
23. DOOR 15 A: Power door lock system
24. STOP 15 A: Stop lights, high mounted
stop light, sequential manual
transmission system
25. TAIL1 20 A: “TAIL2” “PANEL” fuses
26. D P/W 20 A: Power window system
27. P P/W 20 A: Power window system 28. RADIO1 15 A:
Power antenna, radio
29. DOME 10 A: Clock
30. ECUB 10 A: Daytime running light
system, g auges and meters
31. TAIL2 10 A: Taillights, parking lights,
license plate lights, gauges and meters
32. PANEL 7.5 A: Clock, illuminations
33. RADIO2 7.5 A: Gauges and meters,
outside rear view mirror system, clock
34. CIG 15 A: Cigarette lighter
35. I/UP 7.5 A: Engine idle up system
36. ALTS 7.5 A: Charging system
37. ECUB1 25 A: “ECUB” “DOME” fuses
38. SMTB 10A: Sequential manual
transmission system
39. HORN 10 A: Horn
40. HAZ 15 A: Turn signal lights,
emergency flashers
41. AM2 15 A: Starter system, multiport
fuel injection system/sequential
multiport fuel injection system, SRS
airbag system
42. IG2 15 A: Ignition system, multiport
fuel injection system/sequential
multiport fuel injection system 43. EFI1 15 A:
Multiport fuel injection
system/s equential multiport fuel
injection system, engine immobiliser
system
44. ETCS 15A: Multiport fuel injection
system/s equential multiport fuel
injection system
45. HPU 30A: Sequential manual
transmission system
46. DRL NO.1 7.5 A: Daytime running light
system
47. DRL NO.2 20 A: “HEAD LH LWR”
“HEAD RH LWR” “HEAD LH UPR”
“HEAD RH UPR” fuses
48. EFI2 7.5 A: Multiport fuel injection
system/s equential multiport fuel
injection system
49. ST 7.5 A: Starter system
50. SMTIG 10A: Sequential manual
transmission system
Fuses (type B)
51. ABS2 40 A: Antilock brake system
52. EHPS 50 A: Power steering system
53. MAIN 40 A: Starter system, “DRL”
“DRL NO.2” fuses
54. HTR 40 A: Ai
r conditioning system