2002 TOYOTA LAND CRUISER light

2The navigation system operates by
switches on the screen and on the bezel.
When
you touch a switch, a beep sounds.
When using the switches on the touch
screen, please use only light pressure
with your finger to protect the screen
from damage. Do not use objects other
than your finger to touch the screen.
UN005
To type in an address etc., directly touch al-
phabet keys on the screen. If you touch a
wrong letter, delete it using the
switch.
Touching the
switch erases one letter. Touching the
ºListº switch will change the
screen to a display of the database items that
match the name or address that you have
entered on the screen. The number of
matching items is shown to the right side of
the screen. If the matching item is more than
9,999, the system displays º
º on the
screen.
To input numerals, touch the
º0±9º switch
and the display will change the screen to
number input display.
UN006
Touching the ºA±Zº switch changes the
screen back to the previous name input dis-
play.
UN007
When a list is displayed, you can scroll or
page through the list by using the appropri-
ate switch.
To shift to the next or previous
page.
To scroll up or down one item at
a time.
This expresses a displayed
screen position.
Inputting Letters and Numbers

20You are given a number of choices on the
conditions which the system uses to deter-
mine the route to your destination.
UN202
Touch the Onº switch of ºMinimize
Freeway Useº to search for a route other
than freeways as much as possible. (In
some cases, the route cannot avoid running
on a freeway.)
Touch the
Onº switch of ºMinimize Toll
Road Useº to search for a route other than
toll roads as much as possible.
Touch the
Onº switch of ºMinimize
Ferry Useº to search for a route without us-
ing a ferry as much as possible.
The switches you select are highlighted in
green. After choosing conditions, touch the
ºEnterº switch.
UN037
During the route search, ºRoute Search-
ingº appears at the top of the screen and
changes color from the left. When the
search is completed, three types of
routes are displayed on the screen.
UN038
Touch the ºNextº switch to choose one
from the three routes. Route 1:
A route on which you can reach the
destination in the shortest time.
Route 2: A route on which you can reach the
destination in the shortest distance.
Route 3: Other route.
After selecting one, you can start the route
guidance by touching the
ºStartº switch or
starting to move your vehicle.
If you want to set a way point between the
starting point and the destination or change
the search condition, touch the
ºChg.
Routeº
switch. The screen changes and
displays the change route menu. (For de-
tails, see page 22.)
When you keep touching the
ºStartº
switch until you hear a beep, Demo Mode will
start.

23
INFORMATION
When you use the ºone-touchº scrollfeature, the current vehicle positionmark may disappear from the screen.Move the map with a ºone-touchºscroll again or push the
ºMAP/
VOICEº button on the bezel to return
to the current vehicle position map
location display.
The current position is automatically set
as your vehicle receives signals from the
GPS (Global Positioning System). If your
current position is not correct, it is auto-
matically corrected after your vehicle re-
ceives signals from the GPS.
INFORMATION
After the battery disconnection, or ona new vehicle, the current position maynot be correct. As soon as the systemreceives signals from the GPS, the cor-
rect current position is displayed.
If you must correct the current position
manually, follow the steps on page 59. Voice
route guidance is offered automati-
cally during route guidance. Use voice
guidance just for your reference.
You can adjust the volume of the voice or turn
off voice guidance.
UN043
Push the ºMENUº button on the bezel to
display the menu screen. Then touch any
number at the bottom of the screen to se-
lect the desired volume. If you do not
need voice guidance, touch the
ºOFFº
switch.
The selected item is highlighted in green. You can listen to ºVoice route guidanceº by
pushing
the
ºMAP/VOICEº button on the
bezel, even if the volume is ºOFFº.
INFORMATION
During route guidance, the voice guid- ance continues even if the navigationscreen is changed to other screens,such as the audio screen.
Voice Guidance

2When the ºAutomatic Reroutingº feature
is turned on, the system will automatical-
ly search for a new route to the destina-
tion if you leave the guidance route. This
feature does not operate while you are
driving on roads where the guidance is
not available.
To turn the ºAutomatic Rerouteº mode
on:
1. Push the
ºMENUº button on the bez-
el.
UN117
2. Touch the ºGuidance Setupºswitch.
UN118
3. Touch the ºOnº switch on the right of
ºAutomatic Rerouteº.
Selected switch is highlighted in green.
INFORMATION
If your vehicle leaves the guidance route, the system searches for a newroute to the destination. The new routemay or may not take you back to theprevious route depending on how faryou are off the original guidance route.
When the ºTime to Destinationº feature is
turned on, the time required to reach the
destination is displayed on the route
guidance screen.
UN119
To turn the ºTime to Destinationº mode
on:
1. Push the
ºMENUº button on the bez-
el.
Automatic Rerouting Time to Destination

3
UN120
2. Touch the ºGuidance Setupºswitch.
UN121
3. Touch the ºSet Average Speedºswitch on the ºGuidance Setupº screen.
UN122
4. Touch or to set the average
vehicle speeds for driving on a freeway,
main street and residential area.
If you touch the
ºDefaultº switch, the de-
fault speed is set at each item.
5. After you finish setting the desired
speeds, touch the
ºEnterº switch.
6. The guidance setup screen returns.
Touch the
ºOnº switch on the right of
ºTime to Destinationº.
Selected switch is highlighted in green.
INFORMATION

The displayed time to the destination is the approximate driving time cal-culated based on the speeds you se-
lected and your actual position along the guidance route.

The time shown may vary greatly de-pending on your progress along theroute (which may be affected by road
conditions such as traffic jams,
construction work, etc.)

Up to 99 hours 59 minutes can be dis-played.

i
Overview of Touch Screen and Switches
Switch operation
This system operates mainly by the
switches on the screen. To protect the
screen, lightly touch switches on the
screen with your finger. When you touch
a switch on the screen or push the button,
a beep sounds.INFORMATION

If the system does not respond to a touch of a switch, move your fingeraway from the screen and then touch
it again.

You cannot operate dimmed switches.

Wipe off fingerprints on the surfaceof the display using a glass cleaning
cloth.

The displayed image may becomedarker and moving images may be
slightly distorted when the display is
cold.

37
UNX401
Color and tone adjustment
You can adjust the color and the tone while
the DVD video and Video CD are being
played.
COLOR ºREDº:
Strengthens the red color of the screen.
COLOR ºGREENº:
Strengthens the green color of the screen.
TONE º+º: Strengthens the tone of the
screen.
TONE º-º: Weakens the tone of the screen.
UNG407
Depending on the position of the head-
light switch, the screen changes to the
day mode or night mode.
To display the screen in the day mode even
with the head light switch on, touch ºDAY
MODEº on the adjustment screen for bright-
ness and contrast control.
However, if the instrument panel light control
switch is turned fully to the right, mode
switching cannot be done. It remains in the
day mode. In this case, ºDAY MODEº is not
shown on the screen.
If the screen is set in the day mode with the
headlight switch turned to on, this condition
is memorized in the system even with the en-
gine turned off.

42
UNC502
2. Use the ºTEMPº button to set the de-
sired temperature.
The ºTEMPº button is used to set the de-
sired passenger compartment temperature.
The temperature of air delivered to the pas-
senger compartment will be controlled auto-
matically according to the setting. SETTING OPERATION - manual control
When one of the manual control buttons
is depressed while operating in automat-
ic mode, the mode relevant to the de-
pressed button is set. Other conditions
continue to be adjusted automatically.
If manual air flow selection is desired -UNX504UNX504
The outlets from which air is delivered can be
selected manually by touching the switch.
The function of each mode is as follows:
1
Panel - Air flows mainly from the instru-
ment panel vents.
2 Bi-level - Air flows from both the floor
vents and the instrument panel vents.
3 Floor - Air flows mainly from the floor
vents.
It is recommended that you close the lower
vent. For details about this, see page 46.
4 Floor/Windshield - Air flows mainly
from the floor vents and windshield
vents.
It is recommended that you close the lower
vent. For details about this, see page 46.
The selected mode is highlighted in green.
If quick heating or cooling is desired -
UNC502
Push the ºTEMPº button on either side and
hold it until the maximum figure or minimum
figure appears.