2002 TOYOTA LAND CRUISER CD player

31
(iv) Searching by track
unx626
Enter the track numbers using -º, +º
and +10º switches and touch Enterº.
The player starts playing video for that
title number.
You can select a track number by pushing


º or º on the TRACKº button.
Touch Returnº, the previous screen returns.
(h) If the player malfunctions
If the player or another unit equipped with the
player malfunction, your audio system will
display one of the six following messages.
If DISC CHECKº appears on the display:
It indicates that the disc dirty, damaged, or it
was inserted up-side down. Clean the disc
or insert it correctly.
If NO DISCº appears on the display: It in-
dicates that there is no disc in the DVD play-
er.
If REGION CODE ERRORº appears on
the display: It indicates that the DVD region
code is not set properly.
If DVD DOOR OPENº appears on the dis-
play: It indicates that the door of the DVD
player is open.
If DVD ERRORº appears on the display:
It indicates that the inside of the player unit
may be too hot due to the very high ambient
temperature. Remove the magazine from
the player and allow the player to cool down.
If NO DVD MAGAZINEº appears on the
display: It indicates that the magazine is not
inserted into the DVD player.
If the malfunction is not rectified: Take
your vehicle to your Toyota dealer.
NOTICE
To ensure correct audio system opera- tion:
Be careful not to spill beveragesover the audio system.
Do not put anything other than a cas-sette tape or magazine into the cas-
sette tape slot or DVD player.
The use of a cellular phone inside ornear the vehicle may cause a noise
from the speakers of the audiosystem which you are listening to.
However, this does not indicate amalfunction.
Radio reception
Usually, the problem with radio reception
does not mean there is a problem with your
radio - it is just the normal res ult of conditions
outside the vehicle.
Car audio system operating
hints

32For example, nearby buildings and terrain
can interfere with FM reception. Power lines
or telephone wires can interfere with AM sig-
nals. And of course, radio signals have a lim-
ited range, and the farther you are from a sta-
tion, the weaker its signal will be. In addition,
reception conditions change constantly as
your vehicle moves.
Here are some common reception
problems
that probably do not indicate a problem with
your radio:
FM
Fading and drifting stations - Generally,
the effective range of FM is about 40 km (25
miles). Once outside this range, you may no-
tice fading and drifting, which increase with
the distance from the radio transmitter. They
are often accompanied by distortion.
Multi-path - FM signals are reflective, mak-
ing it possible for two signals to reach your
antenna at the same time. If this happens,
the signals will cancel each other out, caus-
ing a momentary flutter or loss of reception.
Static and fluttering - These occur when
signals are blocked by buildings, trees, or
other large objects. Increasing the bass lev-
el may reduce static and fluttering. Station
swapping - If the FM signal you are
listening to is interrupted or weakened, and
there is another strong station nearby on the
FM band, your radio may tune in the second
station until the original signal can be picked
up again.
AM
Fading - AM broadcasts are reflected by the
upper atmosphere - especially at night.
These reflected signals can interfere with
those received directly from the radio station,
causing the radio station to sound alternately
strong and weak.
Station interference - When a reflected sig-
nal and a signal received directly from a radio
station are very nearly the same frequency,
they can interfere with each other, making it
difficult to hear the broadcast.
Static - AM is easily affected by external
sources of elec trical noise, such as high ten-
sion power lines, lightening, or electrical mo-
tors. This results in static.
Caring for your cassette player and tapes
For high performance from your cassette
player and tapes:
Clean the tape head and other parts regular-
ly. 
A dirty tape head or tape path can de-
crease sound quality and tangle your cas-
sette tapes. The easiest way to clean
them is by using a cleaning tape. (A wet
type is recommended.)
Use high-quality cassettes:
 Low-quality cassette tapes can cause
many problems, including poor sound, in-
consistent playing speed, and constant
auto-reversing. They can also get stuck
or tangled in the cassette player.
 Do not use a cassette if it has been dam-
aged or tangled or if its label is peeling off.
 Do not leave a cassette in the player if you
are not listening to it, especially if it is hot
outside.
 Store cassettes in their cases and out of
direct sunlight.
 Avoid using cassettes with a total playing
time longer than 100 minutes (50 minutes
per side). The tape used in these cas-
settes is thin and could get stuck or
tangled in the cassette player.

33
Caring for your DVD player and discs
Audio CDs
DVD video discs
Video CDs

Use only discs labeled as shown above.
CD- R(CD- Recordable), CD- RW(CD-
Re-writable) and personal computer use
CD-ROMs may not be playable on your
DVD player.
 Your DVD player is intended for use with
12 cm (4.7 in.) discs only.
 Extremely high temperature can keep
your DVD player from working. On hot
days, use air conditioning to cool the ve-
hicle interior before you listen to a disc. 
Bumpy roads or other vibrations may
make your multi-disc player skip.
 If moisture gets into your DVD player, you
may not hear any sound even though your
DVD player appears to be working. Re-
move the magazine from the player and
wait until it dries.
Z17035

34
Your DVD player cannot play special
shaped, labeled or low-quality discs as
those shown here. Do not use them as
the player could be damaged.
 Handle discs carefully, especially when
you set them into the magazine. Hold
them on the edge and do not bend them.
Avoid getting fingerprints on them, partic-
ularly on the shiny side.
 Dirt, scrapes, warping, pin holes, or other
disc damage could cause the player to
skip or to repeat a section of a track. (To
see a pin hole, hold the disc up to the
light.)
 Remove discs from the DVD player when
you are not listening to them. Store them
in their plastic cases away from moisture,
heat, and direct sunlight.
To clean a disc: Wipe it with a soft, lint-free
cloth that has been dampened with water.
Wipe in a straight line from the center to the
edge of the disc (not in a circle). Do not use
a conventional record cleaner or anti-static
device.
CAUTION
DVD players use an invisible laser
beam which could cause hazardous
radiation exposure if directed outside
the unit. Be sure to operate the player
correctly.