2002 SUBARU LEGACY turn signal bulb

[x] Cancel search: turn signal bulb

Page 131 of 466

SUBARU LEGACY 2002 3.G Owners Manual 3-18
�VDC (Vehicle Dynamics Control) OFF indicator  light (if equipped)
� This indicator light comes on when the ignition switch is turned ON
and goes out about 6 seconds after the engine has started.

Page 372 of 466

SUBARU LEGACY 2002 3.G Owners Manual 11-2Battery
11-51
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . 
Fuses 11-52
. . . . . . . . . . . .

Page 425 of 466

SUBARU LEGACY 2002 3.G Owners Manual  Maintenance and service11-55
–
 CONTINUED  –
Replacing bulbs
HB5019EB
Wattage Bulb No.
1 Headlight
GT and OUTBACK modelsLow beam 12V –55W H1
High beam 12V –60W 9005 (HB3)
Except GT and OUTBAC

Page 426 of 466

SUBARU LEGACY 2002 3.G Owners Manual 11-56
Wattage Bulb No.
8 Backup light
Sedan 12V–27W 3156K 
Station wagon 12V –27W 1156
9 Luggage area light 12V –13W 912
Q High mount stop light
Sedan 12V–16W 921 
Station wagon 12V –13W 912

Page 429 of 466

SUBARU LEGACY 2002 3.G Owners Manual  Maintenance and service11-59
–
 CONTINUED  –
5. To install the bulb to the headlight assembly, turn it clockwise until it clicks.
6. Install the headlight bulb cover. �Except GT and OUTBACK model

Page 431 of 466

SUBARU LEGACY 2002 3.G Owners Manual  Maintenance and service11-61
–
 CONTINUED  –
�Rear combination lights �Sedan
HBB034BCHBF014DA
HBB035BB
1. Open the trunk lid.
2. Open the rear combination light cover. For covers on the trunk lid

Page 432 of 466

SUBARU LEGACY 2002 3.G Owners Manual 11-62
5. Install a new bulb in the socket. 
6. Set the bulb socket into the rear combination light assembly and
turn it clockwise until it locks.
7. Close the cover and latch the clock. �Station wagon

Page 433 of 466

SUBARU LEGACY 2002 3.G Owners Manual  Maintenance and service11-63
–
 CONTINUED  –
3. Using a Phillips screwdriver, remove the upper and lower screws 
that secure the side cover of the rear combination light assembly.
4. Remove the b
Page:   1-8 9-16 next >