2002 Peugeot 607 Dag seat adjustment

3YOUR AT A GLANCE
1Lights and direction indica
tors stalk.
2 Steering wheel adjustment.
3 Driver's front air bag.
Horn.
4 Instrument dials.
5 Windscreen wash/wipe
stalk.
Trip computer stalk.
6 Audio remote control stalk.
7 Hazard warning lights
switch.
8 Central adjustable
heating/ventilation vents and
air flow regulation.
9 Sunshine / brightness
sensor.
10 Windscreen demisting
vents.
11 Passenger air bag.
12 Glove compartment.
13 Side adjustable heating/ven
tilation vents and air flow
regulation. 14
Door window demisting
vent.
15 Passenger air bag disarming
switch.
16 Front seats heating switch.
17 Rear ashtray.
Rear lighter.
Rear seats heating switch.
18 Rear footwell heating vent.
19 Twoposition armrest with
compartments.
20 Handbrake.
21 Electronically controlled sus
pension switch.
Doors and boot locking
switch.
Sunroof switch.
Rear blind switch.
22 Front ashtray.
Front lighter.
23 Gear lever.
24 RM2 audio system or RT2
audio/telephone system with
PEUGEOT call button. 25
Heating/ventilation controls.
26 Multifunction display.
27 Steering lock and ignition.
28 Fuse box.
29 Speakers location.
30 Electric mirror controls.
Window controls.
Rear window locking control.
31 Headlamp height adjust
ment.
32 ESP disarming switch.
33 Alarm button.
34 Cruise control.
35 Memory buttons for:
Front seat settings
Electric mirror settings

YOUR AT A GLANCE8
THE SEATS
Manual front seats
1 Forwardsbackwards adjustment.
2 Seat angle adjustment*.
3 Seat height adjustment*.
4 Seat back angle adjustment.
5 Lumbar adjustment*.
6 Head restraint height and tilt adjust
ment (press the tab to slide it down).
* Driver's seat only.
Electric front seats
A Forwardsbackwards adjust
ment.
B Seat angle adjustment.
C Seat height adjustment
D Seat back angle adjustment.
E Lumbar adjustment.
F Head restraint height adjust
ment.
M Memorises settings.
 Switch on the ignition and
adjust the seat and the mirrors.
 Press button 'M'then within 4
seconds either button '1'for
the first position, or button '2'
for the second position.
1 Recalls the first position.
2 Recalls the
second position.
94
93

YOUR 607 IN DETAIL93
THE SEATS
Manual front seats
1 Forwardsbackwards adjustment
Lift the lever and slide the seat forwards or backwards.
2 Seat cushion angle adjustment *
Raise the catch while pressing on or easing off the
seat back to obtain the required height.
3 Driver's seat height adjustment* Raise the catch to obtain the required height.
4 Seat back angle adjustment Raise the catch to obtain the required angle.
5 Lumbar adjustment *
Raise or lower the lever to obtain the correct position.
6 Head restraint height adjustment The head restraint has a frame with notches which
prevent the head restraint dropping down (safety
device in the event of an impact).
To raise the head restraint, push it upwards.
The setting is correct when the upper edge of the
head restraint is level with the top of the head.
To lower the head restraint, it is necessary to push
simultaneously :
–
the button located on the base of the head restraint frame ,
– the head restraint downwards.
The head restraint angle is also adjustable.
To remove the head restraint, lift it out by pressing the lug.
Warning : never drive with the head restraints removed; they
should be in place and correctly adjusted.
* Driver's seat only.

YOUR 607 IN DETAIL
94
Electric front seats
A Forwardsbackwards adjustment
Push the control forwards or backwards to slide the
seat.
B Seat cushion angle adjustment Tilt the front of the control upwards or downwards to
obtain the required angle.
C Seat height adjustment Tilt the rear part of the control upwards or downwards
to obtain the required height.
D Seat back angle adjustment Tilt the control to the front or the rear to obtain the co r
rect angle.
E Lumbar adjustment (mechanical adjustment) Raise or lower the lever to obtain the correct position.
F Head restraint height adjustment Tilt the control upwards or push it downwards to obtain
the correct height.
The setting is correct when the upper edge of
the head restraint is level with the top of the
head.
The head restraint angle is also adjustable manually.
To remove the head restraint, tilt the seat back to 45°
and place the head restraint in the high position, then
pull with both hands.
Note: the electrical functions of the driver's seat are inop
erative three minutes after the ignition has been switched
off.

YOUR 607 IN DETAIL
94
Electric front seats
A Forwardsbackwards adjustment
Push the control forwards or backwards to slide the
seat.
B Seat cushion angle adjustment Tilt the front of the control upwards or downwards to
obtain the required angle.
C Seat height adjustment Tilt the rear part of the control upwards or downwards
to obtain the required height.
D Seat back angle adjustment Tilt the control to the front or the rear to obtain the co r
rect angle.
E Lumbar adjustment (mechanical adjustment) Raise or lower the lever to obtain the correct position.
F Head restraint height adjustment Tilt the control upwards or push it downwards to obtain
the correct height.
The setting is correct when the upper edge of
the head restraint is level with the top of the
head.
The head restraint angle is also adjustable manually.
To remove the head restraint, tilt the seat back to 45°
and place the head restraint in the high position, then
pull with both hands.
Note: the electrical functions of the driver's seat are inop
erative three minutes after the ignition has been switched
off.

YOUR 607 IN DETAIL
100
SEAT BELTS
Front seat belt height adjustment:
 To lower the attachment point,
squeeze control 1and slide it
downwards.
 To raise the attachment point,
squeeze control 1and slide it
upwards.
To lock the seat belts  Pull the strap, then insert the end
into the buckle. Front seat belts with
pretensioner and force limiter
Safety in the event of a frontal impact
has been improved by the introduc
tion of seat belts with pretensioner
and force limiter connected to the
front air bags. Depending on the
seriousness of the impact, the pre
tensioning system instantly tightens
the seat belts firmly against the bod
ies of the occupants.
The pretensioning seat belts are
armed when the ignition is on.
The force limiter reduces the pres
sure of the seat belt on the body of
the occupant in the event of an acci
dent.
Rear seat belts with force limiter
The rear seats are all fitted with a
threepoint inertia reel seat belt.
Third rear central seat belt
– pull the belt located between the
two head restraints at the left rear,
– insert the fixed buckle in the black clasp located on the left,
– insert the sliding buckle in the red and black (movable) clasp. To
release it, press the black button of
the locking clasp.
To be effective, a seat
belt must be tightened as
close to the body as pos
sible.
Depending on the nature and seri
ousness of the impact, the pre
tensioners may be triggered
before and independently of the
air bags.
In all cases, the air bag warning
light comes on.
After an impact, have the system
checked by a PEUGEOT dealer.
The system has been designed to
be fully oper ational for ten years.
Have it replaced after this period.

YOUR 607 IN DETAIL
118
Horn
Press one of the spokes or the cen
tre of the steering wheel.
Manual adjustment of the
headlamps
Depending on the load in your vehi
cle, adjusting the beam of your head
lamps is recommended.
0 1 or 2 people in the front seats.
– 3 people.
1 5 people.
2 5 people + maximum autho
rised loads.
3 Driver + maximum authorised
loads.
Initial setting is position 0.
Automatic adjustment of
headlamps.
Refer to the paragraph on Lighting
under the section entitled 'Towing a
trailer...'. Hazard warning lights
Press the button, the direction indi
cators flash.
They can operate with the ignition
off.
Steering wheel height and
depth adjustment 
When the vehicle is stationary,
unlock the steering wheel by
pulling handle Adownwards.
 Adjust the height and depth of the
steering wheel then lock by push
ing handle Afully upwards.
Automatic lighting of hazard
warning lights*
When braking in an emergency ,
depending on the force of decelera
tion, the hazard warning lights come
on automatically. They switch off
automatically the first time you accel
erate.
It is also possible to switch them off
by pressing the button on the fascia.
*According to country

PRACTICAL INFORMATION 147
Fuse no. Rating
Functions
7 10 A Switches, rear lighter illumination, front courtesy light, rear co urtesy light, rear lighter,
number plate lighting, headlamp height adjustment.
8 10 A Diagnostic connector, headlamp height adjustment control uni t, HF locking receiver,
passenger compartment air temperature sensor, HF tyre underinflatio n receiver.
9 20 A Headlamp wash.
10 20 A Glove box lighting, front lighter, front and rear courtesy li ght, electrochrome interior mirror,
electric exterior mirrors.
11 5 A Control unit for automatic lighting of headlamps, air bags control unit, safety relay for
automatic lighting of headlamps.
12 30 A Rear window switches on driver's pad, rear windows.
13 30 A Windscreen wiper.
14 15 A Not used.
15 15 A Driver's door pad, passenger's door pad.
16 15 A Rear lighter.
17 5 A Heated exterior mirrors.
18 15 A Rear left brake light, additional brake light.
19 10 A Parking assistance control unit, navigation control unit.
20 15 A Alarm siren, monochrome screen or colour screen control unit, HF receiver, audio system /
telephone, monochrome or colour navigation control unit, diese l additive control unit.
21 15 A Dignostic connector, caravan socket, trailer sidelights relay.
22 15 A Diesel additive control unit, driver's seat memory control unit, d river's door pad,
passenger's door pad.
23 30 A Driver's window, passenger's window, sunroof safety autoreverse, pa ssenger window swit
ch on driver's door pad andpassenger's door pad.
24 10 A Rear fog lamp.
25 40 A PARC shunt.
26 40 A Heated rear screen, radio aerial amplifier.