2002 Peugeot 607 Dag lock

INSTRUMENTS AND CONTROLS
30
INDICATOR LIGHTS
With the key in the accessories position (1st notch): the batte
ry charge warning light illuminates on the instrument panel display.
With the ignition on (2nd notch): the following three warning lights illuminate on the sides of the instrument panel:
Brake fluid level and brake force distribution fault warning light.
This light should go out after 3 seconds.
If the warning light remains on, or if it comes on when the engine is running and the vehicle is moving, it indicates
an excessive drop in the brake fluid level or a malfunction of the brake force distribution.
Stop immediately. Contact a PEUGEOT dealer.
Antilock braking system (ABS) warning light
This should go out after 3 seconds.
If the warning light remains on or comes on above 8 mph (12 km/h ), this indicates a malfunction of the ABS.
However, the vehicle retains conventional servoassisted braking.
Contact a PEUGEOT dealer.
Engine diagnostics warning light
This should go out 3 seconds after the engine starts.
If it flashes with the engine running, this indicates a ma lfunction in the injection or the ignition system. There is a
risk of damage to the catalytic converter (petrol engine only).
If it is on continuously, this indicates a fault in the e mission control system.
Contact a PEUGEOT dealer as soon as possible.
At the same time, on the instrument panel display: If no malfunction has been detected: the OK light comes on after two seconds (following a black screen), in t he
absence of indicator lights showing the status of vehicle fun ctions. If these indicator lights are present, the OKbut
ton will come on after these. You may start your vehicle.
If a 'minor' malfunction has been detected: the warning light for the faulty function comes on. Certain indicator
lights showing the status of vehicle functions may also come on, followed by the OKindicator light. You can start
your vehicle; however, contact a PEUGEOT dealer as soon as possible.
If a 'major' malfunction has been detected: the corresponding warning light comes on. Certain indicator li ghts showing
the status of vehicle functions may also come on. The OKindicator light does not come on. Do not start your vehicle.
Contact a PEUGEOT dealer.
Afterwards, if the passenger air bag is disarmed, the co rresponding indicator light will come on.

INSTRUMENTS AND CONTROLS
36
Antilock braking system (ABS) warning light
This is linked to the warning light on the instrument pane
l.
Display of this warning light is accompanied by an audible si gnal and the message 'ABS faulty' on the multifunc
tion display.
If the warning light remains on, or comes on at over 8 mph (12 km/h), this indicates a malfunction of the ABS.
However, the vehicle retains conventional servoassisted braking.
Contact a PEUGEOT dealer.
Automatic headlamp adjustment warning light
Display of this warning light is accompanied by an audible si gnal and the message 'Automatic adjustment of
headlamps faulty' on the multifunction display.
It comes on if there is a malfunction of the system.
Contact a PEUGEOT dealer. Automatic gearbox fault warning light
Display of this warning light is accompanied by an audible si gnal and the message 'Automatic gearbox faulty' on
the multifunction display.
It comes on if there is an abnormality in the automatic gearbo x.
The gearbox will continue to operate in downgrade mode (lo cked in 3rd gear).
Contact a PEUGEOT dealer. Tyre underinflation detector battery flat / remote control ba ttery flat / impact sensor fault / wheel(s) miss
ing warning light
Display of this warning light is accompanied by an audible si gnal and a message on the multifunction display show
ing the cause of the warning:
– 'Tyre pressure sensor battery charge low',
– 'Remote control battery charge low',
– 'Impact sensor faulty',
– 'X tyre pressure sensor(s) missing'.
Contact a PEUGEOT dealer.

Changing the colours
Select the desired colour, then confirm.
If required, select 'automatic
day/night' , then confirm and record
the changes.
Note: this function allows the system
to change automatically to 'Night'
colour when the vehicle lights are on.
Changing the brightness
Select the 'Brightness' function,
then confirm:
– turn the dial clockwise to increase,
– turn the dial anticlockwise to decrease.
Record the modifications.
Note: this function allows only limit
ed adjustment of the brightness,
since the screen lighting is depen
dent on the sunshine/brightness sen
sor in the vehicle.
YOUR 607 IN DETAIL 45
Insert the software CDRom into the
drive in place of the map CDRom.
After a few moments, the mesage
"Warning Reprogramming Sequence"
then the message "Navigation applica
tion Processing" apears, together with
a progress bar.
When the message "Software Loading
End Eject CD" appears, eject the
software CDRom and insert the map
CDRom into the drive.
Check that the CDRom has loaded
correctly (see paragraph "Voice syn
thesis adjustment" in the chapter enti
tled "The satellite navigation system
with colour screen").

46Setting the time and date
Select the 'Hours' function, then
confirm:
– turn the dial clockwise to scroll upwards through the hours, or turn
it anticlockwise to scroll down
wards through the hours,
– confirm, to finish setting the time.
Proceed in the same way for the
'Minutes' function.
Select the '12h' or '24h' function by
pressing the dial. Select the
'Day' function, then con
firm:
– turn the dial clockwise to scroll for wards through the days, or turn it
anticlockwise to scroll backwards
through the days,
– confirm, to finish setting the day.
Proceed in the same way for the
'Month' and'Year' functions.
Record the changes.
Changing the units
Select the units required, then con
firm and record the changes.
YOUR 607 IN DETAIL
Setting the image frame
This function allows the image to be
centralised on the screen.
Select the 'Vertical frame' function,
then confirm:
– turn the dial clockwise to go up the screen,
– turn the dial anticlockwise to go down the screen,
– confirm, to finish setting the verti cal frame.
Select the 'Horizontal frame' func
tion, then confirm:
– turn the dial clockwise to go to the right,
– turn the dial anticlockwise to go to the left,
– confirm, to finish setting the hori zontal frame.
Record the changes.

YOUR 607 IN DETAIL
48
Stalk movement Function
1
Upwards Increase volume
2 Downwards Decrease volume
3 Forwards Automatic search of higher frequencies (radio)
Press for more than 2 seconds, repeat until button is released: ma nual search of
higher frequencies (radio) Selection of next track (cassette and CD )
Press for more than 2 seconds until button is released: fast forwa rd (cassette and CD)
4 Backwards Automatic search of higher frequencies (radio)
– Selection of previous track (cassette and CD)
Press for more than 2 seconds until button is released: rewind (casse tte and CD)
5 Press the end Change of source (Radio/cassette/CD)
6 Rotation Selection of next station stored in memory (radio) Sele ction of next CD (CD)
(clockwise) Reversal of direction of play (cassette)
7 Rotation Selection of previous station stored in memory (radio) Se lection of previous CD (CD)
(anticlockwise) Reversal of direction of play (cassette)
AUDIO RM2

50
Stalk movementFunction
1 Upwards Increase volume
2 Downwards Decrease volume
3 Forwards Automatic search of higher frequencies (radio)
Press for more than 2 seconds, repeat until button is released: ma nual search of
higher frequencies (radio) Selection of next track (CD)
Press for more than 2 seconds until button is released: fast forwa rd (CD), Selection of following page (Tel.)
– Press for more than 2 seconds: selection of last page (Tel.)
4 Backwards Automatic search of lower frequencies (radio)
Press for more than 2 seconds, repeat until button is released: ma nual search of
lower frequencies (radio) Selection of previous track (CD)
Press for more than 2 seconds until button is released: rewind (CD), selection of previous number (Tel.)
– Press for more than 2 seconds: selection of first page (Tel.)
5 Press the end Change of source (Radio/CD)
Press for more than 2 seconds: switch between radio/tel. mode.
Selection of directory (Tel./off) Lift/replace handset (Tel./o n).
6 Rotation Selection of next station stored in memory (radio) Sele ction of next CD (CD)
(clockwise) Selection of following menu item (Tel.)
7 Rotation Selection of previous station stored in memory (radio) Se lection of previous CD (CD)
(anticlockwise) Selection of previous menu item (Tel.)
YOUR 607 IN DETAIL
AUDIO/TELEPHONE RT2

Guidance options
The submenu 'Guidance options' offers various possibil
ities for improving guidance:
– calculation criteria,
– voice synthesis adjustment,
– managing the directories,
– clearing the directories.
Calculation criteria
Select the criteria which interest you from the proposed list,
then confirm.
When the criteria of your choice have been selected,
choose the ''OK''function, then confirm. Voice synthesis adjustment
Activate using the
'Switch off/Activate' button, then
confirm:
– once to cancel the function,
– a second time to reactivate it.
Select "Female speaker" or "Male speaker" , then
confirm.
Select the volume adjustment zone, then confirm:
– turn the dial clockwise to increase the volume,
– turn the dial anticlockwise to decrease the volume,
– confirm the setting.
Select the ' OK' function when the setting is satisfactory,
then confirm.
Note: the voice synthesis volume can also be adjusted
during a message using the audio system button or the
steering wheel stalk.
YOUR 607 IN DETAIL
86

YOUR 607 IN DETAIL95
Memorising using the buttons
To memorise:
 Place the ignition key in the 'run
ning' position (2nd notch),
 Adjust your seat and mirrors,
 Press button M,then button 1
(first driving position) or button 2
(second driving position) within
four seconds.
An audible signal confirms that a
position has been memorised.
Memorising a new position cancels
the previous one.
Recalling a memorised position
Engine off  Briefly press button 1 or 2to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
Note: after recalling a memorised
position five times in succession, the
function will be cancelled until the
engine is started.
Engine running
 Keep button 1 or 2pressed down
until the bleep indicates the end of
setting of the corresponding
memorised position.
Memorising seat
and mirror positions
Four driving positions can be memo
rised:
– two, using two remote control
keys (two users),
– two, using buttons M/1 and M/2.
Driving positions memorised by
the remote control key
When locking the doors, the remote
control key memorises the position
of the driver's seat and the exterior
mirrors.
When unlocking the doors, the dri
ver's seat and the exterior mirrors
resume the position memorised by
the remote control key if this has
changed in the meantime.
Each remote control key can
memorise a specific setting. Front and rear heated seats
controls
 Press the switch. The tempera
ture is regulated automatically.
 Press it again to stop operation.
Note: the command to activate heat
ing of the seat(s) remains in the
memory for two minutes after the
ignition is switched off.