2002 Peugeot 607 Dag trip computer

3YOUR AT A GLANCE
1Lights and direction indica
tors stalk.
2 Steering wheel adjustment.
3 Driver's front air bag.
Horn.
4 Instrument dials.
5 Windscreen wash/wipe
stalk.
Trip computer stalk.
6 Audio remote control stalk.
7 Hazard warning lights
switch.
8 Central adjustable
heating/ventilation vents and
air flow regulation.
9 Sunshine / brightness
sensor.
10 Windscreen demisting
vents.
11 Passenger air bag.
12 Glove compartment.
13 Side adjustable heating/ven
tilation vents and air flow
regulation. 14
Door window demisting
vent.
15 Passenger air bag disarming
switch.
16 Front seats heating switch.
17 Rear ashtray.
Rear lighter.
Rear seats heating switch.
18 Rear footwell heating vent.
19 Twoposition armrest with
compartments.
20 Handbrake.
21 Electronically controlled sus
pension switch.
Doors and boot locking
switch.
Sunroof switch.
Rear blind switch.
22 Front ashtray.
Front lighter.
23 Gear lever.
24 RM2 audio system or RT2
audio/telephone system with
PEUGEOT call button. 25
Heating/ventilation controls.
26 Multifunction display.
27 Steering lock and ignition.
28 Fuse box.
29 Speakers location.
30 Electric mirror controls.
Window controls.
Rear window locking control.
31 Headlamp height adjust
ment.
32 ESP disarming switch.
33 Alarm button.
34 Cruise control.
35 Memory buttons for:
Front seat settings
Electric mirror settings

YOUR 607 IN DETAIL
42
THE MULTI-FUNCTION
DISPLAY
General
– The multifunction, monochrome Cor colour display shows the
following:
– the time,
– the date,
– the outside temperature (symbol °C flashes if there is a risk of ice),
– the audio system displays,
– the telephone displays,
– status of the openings,
– warning messages (e.g. 'Fuel level low') and vehicle function status
messages, displayed temporarily,
– trip computer display (see corre sponding section),
– satellite navigation system dis plays* (see corresponding sec
tion),
– video images.
It is controlled by a keypad.
Superimposed display
When the status of a function (audio
system, telephone, trip computer,
satellite navigation system,....)
changes while the display has been
showing a different function, a win
dow opens to announce the modifi
cation (information / warning mes
sage), then disappears.
* According to country The control pad
This enables the functions, controls and parameters displayed to
be selected
and validated. It is located next to the display.
Dial
This has two functions:
–Rotation of the dial:
This allows you to move around the screen and thus select a
function.
It also allows you :
– after selection of a 'setting' type parameter, to increase or
decrease the value,
– with a 'list'type parameter, to open the list and scroll through
the values.
– Pressing the dial:
This allows:
– confirmation of the selected function or the modified value.
– selection of a 'setting' or 'list' type parameter in order to
modify it.
– cancelling of a superimposed display.
'MENU' button:
This allows access at any time to the general menu.
'MODE' button:
– brief press: – monochrome screen C: selection of functions (audio system,
navigation / guidance...),
– colour screen: access to the list of controls (context menu) of
the function being displayed.
– Press for more than two seconds: putting the screen on standby.
'ESC' button:
– brief press: cancelling of the operation in progress and a re turn
to the previous screen or erasing of a superimposed display.
– press for more than two seconds: return to the startup screen.

YOUR 607 IN DETAIL43
Setting the parameters
From the
'general menu' , the
'Display configuration' menu
allows you to access the following
parameters:
– setting the video brightness and display,
– setting the date and time,
– choosing the language in which information is heard and displayed
(German, Spanish, French, Eng
lish, Italian), setting the formats
and the units. These settings allow
you to choose a display in km/h or
mph, the temperature in Celsius or
in Fahrenheit, and to modify the
hour (12 or 24 hour) and date
format.
Monochrome screen C
General menu
Press the
'Menu' button to select
one of the following functions:
– navigation/guidance* (see Section on 'Satellite naviga
tion system'),
– display configuration (see paragraph on 'Setting the
parameters', below),
– navigation options* (see Section on 'Satellite naviga
tion system'),
– telephone phone books (see 'RT2 audio equipment' section).
* According to country The colour screen
General menu
From the
general menu, select one
of the following functions by turning
the dial then press the dial to confirm:
• general information,
• navigation/guidance*,
• map*,
• trip computer,
• settings,
• video.
Note: to enable you to make full use
of all the system functions, you have
two CDRoms: one contains the soft
ware and the different languages of
the voice synthesis, the other con
tains the "Satellite navigation sys
tem" map data. The latter must be in
the drive for the "Navigation/Guid
ance" and "Map" functions to be
active.

YOUR 607 IN DETAIL43
Setting the parameters
From the
'general menu' , the
'Display configuration' menu
allows you to access the following
parameters:
– setting the video brightness and display,
– setting the date and time,
– choosing the language in which information is heard and displayed
(German, Spanish, French, Eng
lish, Italian), setting the formats
and the units. These settings allow
you to choose a display in km/h or
mph, the temperature in Celsius or
in Fahrenheit, and to modify the
hour (12 or 24 hour) and date
format.
Monochrome screen C
General menu
Press the
'Menu' button to select
one of the following functions:
– navigation/guidance* (see Section on 'Satellite naviga
tion system'),
– display configuration (see paragraph on 'Setting the
parameters', below),
– navigation options* (see Section on 'Satellite naviga
tion system'),
– telephone phone books (see 'RT2 audio equipment' section).
* According to country The colour screen
General menu
From the
general menu, select one
of the following functions by turning
the dial then press the dial to confirm:
• general information,
• navigation/guidance*,
• map*,
• trip computer,
• settings,
• video.
Note: to enable you to make full use
of all the system functions, you have
two CDRoms: one contains the soft
ware and the different languages of
the voice synthesis, the other con
tains the "Satellite navigation sys
tem" map data. The latter must be in
the drive for the "Navigation/Guid
ance" and "Map" functions to be
active.

Language
Select the required language, then
confirm and record the modification.
The system then asks you to load the
language inn the navigation system.
Select "Yes"then confirm.General information
The 'General information' function
displays an information summary on
the following items:
– the time, outside temperature, date or telephone status,
– the audio equipment and the tele phone,
– the range (see Section on 'Trip computer'),
– Navigation/guidance details* not covered by the map (see Section
on 'Satellite navigation system').
The context menu for this function
enables you to access:
– the parameters to adjust for opti mum use of the screen,
– the telephone directories (SIM, BIS, and TEL).
*According to country. Setting the parameters
To modify a parameter, press the dial or
the mode button.
The
'Settings' function displays a sum
mary of the settings used.
The context menu allows you to change
these settings:
– language used for vocal messages or
visual displays (French, English, Ger
man, Spanish, Italian, Dutch),
– colour (blue, green, grey, beige /
auto),
– brightness,
– frame (horizontal, vertical),
– time / date,
– units (kmlitres, milesgallons, °C, °F).
YOUR 607 IN DETAIL
44
To confirm modification of a
setting, select 'OK', then confirm
by pressing the dial.

112YOUR 607 IN DETAIL
THE TRIP COMPUTER
Pressing the button located at the end of thewindscreen wiper controldisplays
in turn: Colour screen
–
'Route 1' with:
• the route number,
• the time which has elapsed since the
last zero reset of the route,
• the average speed,
• the average consumption,
• the distance travelled
– 'Route 2' with the same features.
The following information is displayed
simultaneously at the bottom of the
screen:
– the distance that remains to be travelled,
– the current range,
– the current consumption.
Zero reset
When the required route is displayed,
press the button for more than two
seconds.
Monochrome screen C
– the 'vehicle' index with:
• current range and consumption,
– index '1' (route 1) with:
• the average consumption, the distance driven and the average speed calcu
lated over route ' 1',
– index '2' (route 2) with the same features.
Zero reset
When the required route is displayed, press the button for more than four
seconds.

113
Range
This shows the distance that can still
be covered with the fuel remaining in
the tank.
Note: this figure may rise if there is a
change in driving style or road sur
face, causing a significant drop in
current fuel consumption. Average consumption
This is the average fuel consumption
since the computer was last set to
zero.Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.
YOUR 607 IN DETAIL
Current consumption
This is the average fuel consumption
during the last few seconds.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
Average speed
this is the average speed calculated
since the computer was last set to
zero (with the ignition on).
The routes
Routes 1 and 2 are independent but
have identical application.
Route 1, for example, allows you
to make daily calculations, and route
2 monthly calculations.
On this page, the illustration on
the left represents the mono
chrome screen C display, the one
on the right the colour screen
display.
After resetting the trip computer to
zero, the range data become signif
icant only after a few seconds of
use.
If horizontal segments are displayed
for long periods instead of digits,
contact a PEUGEOT dealer.

Specific features of the colour
screen
'Trip computer' context menu
Briefly press the 'MODE' button to
select one of the following functions:
– Route 1,
– Route 2,
– Enter the distance to the destina tion (when guidance is not activat
ed; otherwise the information is
given by the navigation),
– Change the units (°C or °F, km and
litres or miles and gallons).
Time elapsed since the last zero
reset of the route
This is the time which has elapsed
since the last zero reset of the route
displayed. The time is calculated,
depending on the circumstances, by
the number of 'hours' and 'minutes',
'days' and 'hours' or 'months' and
'days'. Distance remaining to be travelled
This is the distance remaining to the
destination. It can either be calculat
ed by the navigation if guidance is
activated, or entered by the user,
minus the distance covered since
the distance was entered.
At the start of the journey, the dis
tance to be travelled is given by:
– the satellite navigation system, if
guidance has been activated,
– the user entering the distance to the destination.
Note: if digits are missing, dashes
are displayed in their place.
YOUR 607 IN DETAIL
114