2002 MERCEDES-BENZ M-Class key

134
Introduction Audio TelephoneNavigationIndex
System settings
Detour function
If during route guidance you require the navigation sys-
tem to detour around an obstacle, you can automatically
request a new route.
Press any softkey to activate the softkeys. Then
press the softkey “DETR”.
A window appears confirming the detour request. To
continue press . If you don’t want to continue, press
or wait 10 seconds, the detour request will be can-
celled.If you have pressed button, the navigation system
will recalculate the route around the upcoming detour.
Note:
When you are traveling on an expressway or a freeway,
the system calculates a new route avoiding the current
road for a distance of five miles. On surface streets, the
system calculates a new route avoiding the current road
fore a distance of one mile.
P82.85-5063-26
P82.85-5064-26
Route guidance

141
Introduction Audio TelephoneNavigationIndex
System settings
To save the setting, select “Return” with the joystick and
press .
You also can toggle between “Heading Up“ and “North
Up“ modes by pressing and holding the key for
longer then 2 seconds.Setting points of interest icon options
The MCS allows you to choose any 3 of 6 different Point
of Interest icons for display on the detail Map Display.
Press .
Select “Setup“ with the joystick and press .
The Setup Select menu appears. Select “Display Setup”
with the joystick and press .P82.85-5032-26
P82.85-5065-26
Navigation settings

152
Introduction Audio Telephone Navigation Index
System settings
Operating and display elements - System settings 1Selecting audio sources or navigation menu,
Pages 18, 33, 50, 66, 88
2Color display with main menu
3Raising or lowering the volume, page 11
4Navigation menu:
Push joystick to : Adjusting the parameters,
p a g e 15 6 , 15 7
Push joystick to : Adjusting the parameters,
p a g e 15 6 , 15 7
Push joystick to : Select mode,
p a g e 15 6 , 15 7
Push joystick to : Select mode,
p a g e 15 6 , 15 7
5Audio sources:
Softkeys for:
Selecting the parameters, page 153
Adjusting the parameters, page 153
Switching between dark and light mode, page 155
Exit menu, page 153
System settings

153
Introduction Audio Telephone Navigation Index
System settings
Adjusting sound settings
You can adjust the sound settings for the audio sources.
The audio sources include:
• Radio (FM, AM, WB)
•Tape deck
•CD
•CD-Changer
Each audio source has its own adjustments for sound
system, bass and treble levels.
The adjustment for balance and fader are the same for
all audio sources.
Press the softkey “ADJ” in any audio menu (e.g.:
Radio FM menu).
With the softkeys , and you can select
the parameter you want to adjust. The selected parame-
ter will be highlighted.
P82.85-7156-26
System settings

154
Introduction Audio Telephone Navigation Index
System settings
Use the softkeys “-” and “+” or “L“ and “R“ to set
the desired value.
Once you are satisfied with the sound setting press soft-
key “EXIT”.
Press and hold both softkeys “-” and “+” for longer
then 2 seconds to reset the selected parameter.
Vehicles with sound system:
With the softkeys , and select the
parameter “SOUND“.
You can select with the softkeys , and
the desired sound impression.Sound impressions available:
• Standard - the sound is set to linear for the centre of
the vehicle
• Speech - emphasises voices
• Driver - the sound is set to the optimum values for
the front seats
• Ambience - recreates the sound of rooms
Note:
Sound optimisation is not available for the service
sources.
System settings

155
Introduction Audio Telephone Navigation Index
System settings
Reset the sound settings:
Return to the audio menu and press the softkey
“ADJ” for longer then 2 seconds. All parameters will be
set to 0 and the sound system will switch to “STAN-
DARD“, and the MCS will return automatically to the
audio mode.Switching between
the light mode and the dark mode
When the parking lights are turned on, the display
switches to the dark mode. The display is illuminated in
a low dimmed level.P82.85-7160-26
P82.85-7156-26
System settings

156
Introduction Audio Telephone Navigation Index
System settings
If you want to switch to the light mode in the audio
modes (radio, tape or CD) press the softkey “ADJ”
and then press the softkey “LGHT” .
If you are in the navigation mode, press any softkey to
activate the softkeys. Then press the softkey
“LGHT” .
To return to the dark mode in the audio modes (radio,
tape or CD) press the softkey “ADJ” and then
press the softkey “DARK”.
If you are in the navigation mode press any softkey to
activate the softkeys. Then press the softkey
“DARK” .Adjusting the brightness
in the dark mode
You can adjust the brightness with the instrument clus-
ter illumination. See Operator’s Manual.
System settings