Page 32 of 165
28
IntroductionAudioTelephone Navigation Index
System settings
Auto store preset menu
1Frequency of the station you are listening to pres-
ently
2Preset position of the station you are listening to
presently
3Memory preset availableWe a t h e r b a n d
Press softkey “WB”. WB is displayed in the upper
left corner.
The channel last tuned to will appear on the display.
P8285-7123-26
P82.85-7124-26
Radio operation
Page 158 of 165
154
Introduction Audio Telephone Navigation Index
System settings
Use the softkeys “-” and “+” or “L“ and “R“ to set
the desired value.
Once you are satisfied with the sound setting press soft-
key “EXIT”.
Press and hold both softkeys “-” and “+” for longer
then 2 seconds to reset the selected parameter.
Vehicles with sound system:
With the softkeys , and select the
parameter “SOUND“.
You can select with the softkeys , and
the desired sound impression.Sound impressions available:
• Standard - the sound is set to linear for the centre of
the vehicle
• Speech - emphasises voices
• Driver - the sound is set to the optimum values for
the front seats
• Ambience - recreates the sound of rooms
Note:
Sound optimisation is not available for the service
sources.
System settings
Page 159 of 165
155
Introduction Audio Telephone Navigation Index
System settings
Reset the sound settings:
Return to the audio menu and press the softkey
“ADJ” for longer then 2 seconds. All parameters will be
set to 0 and the sound system will switch to “STAN-
DARD“, and the MCS will return automatically to the
audio mode.Switching between
the light mode and the dark mode
When the parking lights are turned on, the display
switches to the dark mode. The display is illuminated in
a low dimmed level.P82.85-7160-26
P82.85-7156-26
System settings