2002 LAND ROVER DISCOVERY fuel filter

CONTENTS
CONTENTS 3
Alarm handset battery ..................................................................................................................... 10-6
Road wheels ................................................................................................................................... 10-7
Tyres .............................................................................................................................................. 10-7
Brake pads, discs and calipers ....................................................................................................... 10-7
Road wheel speed sensors ............................................................................................................. 10-7
Brake fluid ....................................................................................................................................... 10-8
Fuel filter - diesel engine ................................................................................................................. 10-8
Fuel filter sedimenter ...................................................................................................................... 10-8
Road wheels ................................................................................................................................... 10-8
Radiator/Intercooler ........................................................................................................................ 10-8
Ambient air Temperature and pressure sensor .............................................................................. 10-8
Doors, bonnet and fuel filler flap ..................................................................................................... 10-9
Air suspension intake filter .............................................................................................................. 10-9
Anti-freeze....................................................................................................................................... 10-9
Cooling system ............................................................................................................................... 10-9
Spark plugs - V8 engine.................................................................................................................. 10-10
Air cleaner - V8 engine ................................................................................................................... 10-11
Air cleaner and dump valve - diesel engine .................................................................................... 10-11
Auxiliary drive belt ........................................................................................................................... 10-11
Auxiliary drive belt - V8 engine ....................................................................................................... 10-12
Auxiliary drive belt - diesel engine .................................................................................................. 10-12
Fluid reservoirs ............................................................................................................................... 10-12
Steering box .................................................................................................................................... 10-13
Battery ............................................................................................................................................. 10-13
Intercooler - diesel engine............................................................................................................... 10-14
Engine oil - V8 engine ..................................................................................................................... 10-14
Engine oil - diesel engine ................................................................................................................ 10-14
Centrifuge rotor – diesel engine ...................................................................................................... 10-15
Engine oil filter - diesel engine ........................................................................................................ 10-15
Engine oil filter – V8 engine ............................................................................................................ 10-15
Manual gearbox .............................................................................................................................. 10-16
Automatic gearbox ......................................................................................................................... 10-17
Transfer box .................................................................................................................................... 10-18
Front and rear axle .......................................................................................................................... 10-19
Propeller shafts ............................................................................................................................... 10-19
Anti-roll bar links ............................................................................................................................. 10-20
ACE actuators ................................................................................................................................. 10-21
ACE filter ......................................................................................................................................... 10-21
Brake hose, brake, fuel, ACE, clutch pipes and unions/electrical harnesses ................................ 10-22
Engine, gearbox, transfer box and axles ........................................................................................ 10-23
Exhaust system............................................................................................................................... 10-23
Steering box and front suspension ................................................................................................. 10-23
Steering rod ball joints ................................................................................................................... 10-25
Dampers and SLS height sensors .................................................................................................. 10-25
Front and rear axle suspension links .............................................................................................. 10-26
Towing bracket................................................................................................................................ 10-27
Engine mountings - V8 engine ........................................................................................................ 10-27
Road/roller test................................................................................................................................ 10-28
ENGINE - Td5 ........................................................................................... 12-1-1
DESCRIPTION AND OPERATION
Td5 Engine...................................................................................................................................... 12-1-1
Cylinder block components ............................................................................................................. 12-1-2

CONTENTS
6CONTENTS
EGR systems .................................................................................................................................. 17-1-10
REPAIRS
Modulator - EGR ........................................................................................................................... 17-1-13
Inlet Throttle (ILT) Modulator .......................................................................................................... 17-1-13
Valve - EGR - Pre EU3 models ...................................................................................................... 17-1-14
Valve - EGR - EU3 models ............................................................................................................. 17-1-15
EMISSION CONTROL - V8 ....................................................................... 17-2-1
DESCRIPTION AND OPERATION
Crankcase emission control system ............................................................................................... 17-2-1
Exhaust emission control ................................................................................................................ 17-2-2
Evaporative emission system component layout ............................................................................ 17-2-3
Evaporative emission system (with positive pressure leak detection) component layout (NAS only) 17-2-4
Evaporative emission system control diagram ............................................................................... 17-2-5
Secondary air injection system component layout.......................................................................... 17-2-6
Secondary air injection system control diagram ............................................................................. 17-2-8
Emission Control Systems .............................................................................................................. 17-2-9
Crankcase emission control system ............................................................................................... 17-2-9
Exhaust emission control system ................................................................................................... 17-2-10
Evaporative emission control system ............................................................................................. 17-2-15
Secondary air injection system ....................................................................................................... 17-2-26
Crankcase emission control operation............................................................................................ 17-2-33
Exhaust emission control operation ................................................................................................ 17-2-34
Evaporative emission control operation .......................................................................................... 17-2-38
Secondary air injection system ....................................................................................................... 17-2-42
REPAIRS
Canister - EVAP ............................................................................................................................ 17-2-43
Canister - EVAP - Models with Fuel Leak Detection Pump - up to 03MY ...................................... 17-2-43
Canister - EVAP - Models with Fuel Leak Detection Pump - from 03MY ....................................... 17-2-44
Valve - purge control ..................................................................................................................... 17-2-46
Solenoid - evap canister vent solenoid (CVS) valve ..................................................................... 17-2-46
Sensor - heated oxygen (HO2S) - pre-catalytic converter .............................................................. 17-2-47
Sensor - heated oxygen (HO2S) - post-catalytic converter ............................................................ 17-2-48
Control Valve - Secondary Air Injection (SAI) ............................................................................... 17-2-49
Reservoir - Vacuum - Secondary Air Injection (SAI) - up to 03MY ................................................. 17-2-49
Reservoir - vacuum - Secondary Air Injection (SAI) - from 03MY .................................................. 17-2-50
Pump - Air - Secondary Air Injection (SAI) ..................................................................................... 17-2-50
Air Manifold - LH - Secondary Air Injection (SAI) ........................................................................... 17-2-51
Air Manifold - RH - Secondary Air Injection (SAI) .......................................................................... 17-2-51
Solenoid - Vacuum - Secondary Air Injection (SAI) ...................................................................... 17-2-52
Pipe - Secondary Air Injection (SAI) .............................................................................................. 17-2-52
Pump - Fuel Leak Detection - up to 03MY...................................................................................... 17-2-54
Pump - fuel leak detection - from 03MY ......................................................................................... 17-2-54
Filter - fuel leak detection pump - up to 03MY ................................................................................ 17-2-55
Filter - fuel leak detection pump - from 03MY ................................................................................. 17-2-55
ENGINE MANAGEMENT SYSTEM - Td5 ................................................ 18-1-1
DESCRIPTION AND OPERATION
Engine management component location - passenger compartment ............................................ 18-1-2
Engine management component location - engine compartment .................................................. 18-1-3
Engine management block diagram ............................................................................................... 18-1-4
Description ...................................................................................................................................... 18-1-6

CONTENTS
CONTENTS 7
Operation ........................................................................................................................................ 18-1-38
ADJUSTMENTS
Glow plug ....................................................................................................................................... 18-1-45
REPAIRS
Engine control module (ECM) ........................................................................................................ 18-1-47
Sensor - engine coolant temperature (ECT) ................................................................................. 18-1-47
Sensor - crankshaft (CKP) .............................................................................................................. 18-1-48
Air filter assembly ........................................................................................................................... 18-1-48
Element - air filter ............................................................................................................................ 18-1-49
Sensor - fuel temperature .............................................................................................................. 18-1-50
Sensor - mass air flow (MAF) ....................................................................................................... 18-1-51
Sensor - combined MAP and IAT ................................................................................................. 18-1-51
Sensor - ambient air pressure (AAP) ............................................................................................ 18-1-52
Element - fuel filter ........................................................................................................................ 18-1-53
Cooler - fuel .................................................................................................................................. 18-1-53
Sensor - Throttle position (TP) ........................................................................................................ 18-1-54
Turbocharger ................................................................................................................................ 18-1-55
Intercooler ..................................................................................................................................... 18-1-56
Valve - solenoid boost control ........................................................................................................ 18-1-58
Regulator - fuel pressure .............................................................................................................. 18-1-59
Glow plugs ...................................................................................................................................... 18-1-60
Injectors .......................................................................................................................................... 18-1-61
Switch - cruise control (on/off) ........................................................................................................ 18-1-62
Switch - cruise control (set/resume) ................................................................................................ 18-1-63
Switch - clutch ................................................................................................................................. 18-1-63
ENGINE MANAGEMENT SYSTEM - V8 .................................................. 18-2-1
DESCRIPTION AND OPERATION
Engine management component location - Passenger compartment ............................................ 18-2-2
Engine management component location - Engine compartment .................................................. 18-2-3
Engine management block diagram ............................................................................................... 18-2-4
Description - engine management .................................................................................................. 18-2-6
Operation - engine management .................................................................................................... 18-2-43
DESCRIPTION AND OPERATION
Cruise control component layout .................................................................................................... 18-2-55
Cruise control block diagram .......................................................................................................... 18-2-56
Description - cruise control ............................................................................................................. 18-2-57
Operation - cruise control................................................................................................................ 18-2-66
ADJUSTMENTS
Cable - throttle ............................................................................................................................. 18-2-69
Cable - cruise control .................................................................................................................... 18-2-69
REPAIRS
Spark plugs .................................................................................................................................. 18-2-71
Coil - ignition ................................................................................................................................. 18-2-71
Engine control module (ECM) ......................................................................................................... 18-2-72
Sensor - engine coolant temperature (ECT) ................................................................................ 18-2-73
Sensor - crankshaft position (CKP) ............................................................................................... 18-2-74
Sensor - radiator temperature ....................................................................................................... 18-2-75
Sensor - camshaft position (CMP) ................................................................................................. 18-2-76

CONTENTS
8CONTENTS
Knock sensor (KS) .......................................................................................................................... 18-2-76
Air cleaner assembly .................................................................................................................... 18-2-77
Element - air filter .......................................................................................................................... 18-2-78
Cable - throttle ................................................................................................................................ 18-2-78
Sensor - Mass Air Flow (MAF) ...................................................................................................... 18-2-79
Throttle Body .................................................................................................................................. 18-2-80
Plenum chamber............................................................................................................................. 18-2-81
Sensor - throttle position (TP) ....................................................................................................... 18-2-82
Valve - idle air control (IACV) ....................................................................................................... 18-2-82
Injectors ......................................................................................................................................... 18-2-83
Actuator - cruise control ................................................................................................................ 18-2-84
Vacuum control unit - up to 03MY .................................................................................................. 18-2-85
Vacuum control unit - from 03MY ................................................................................................... 18-2-85
Cable - cruise control ..................................................................................................................... 18-2-86
Switch - cruise control (on/off) ........................................................................................................ 18-2-87
Switch - cruise control (set/resume) .............................................................................................. 18-2-87
Switch - clutch pedal - cruise control ............................................................................................ 18-2-88
ECU - Cruise control ..................................................................................................................... 18-2-88
FUEL DELIVERY SYSTEM - Td5 ............................................................. 19-1-1
DESCRIPTION AND OPERATION
Fuel delivery system component location ....................................................................................... 19-1-1
Fuel tank and breather components ............................................................................................... 19-1-2
Description ...................................................................................................................................... 19-1-3
Operation ........................................................................................................................................ 19-1-11
ADJUSTMENTS
Fuel system purging ....................................................................................................................... 19-1-13
Fuel tank - drain .............................................................................................................................. 19-1-13
REPAIRS
Switch - inertia - fuel cut-off ............................................................................................................ 19-1-15
Pump - fuel .................................................................................................................................... 19-1-15
Tank - fuel ..................................................................................................................................... 19-1-17
Solenoid - fuel filler flap release .................................................................................................... 19-1-18
Switch - fuel filler flap release - up to 03MY ................................................................................... 19-1-18
Switch - fuel filler flap release - from 03MY .................................................................................... 19-1-19
FUEL DELIVERY SYSTEM - V8 ............................................................... 19-2-1
DESCRIPTION AND OPERATION
Fuel delivery system ....................................................................................................................... 19-2-1
Fuel tank and breather components (all except NAS) .................................................................... 19-2-2
Fuel tank and breather components (NAS) .................................................................................... 19-2-3
Description ...................................................................................................................................... 19-2-4
Operation ........................................................................................................................................ 19-2-10
ADJUSTMENTS
Fuel tank - drain .............................................................................................................................. 19-2-11
REPAIRS
Switch - inertia - fuel cut-off ............................................................................................................ 19-2-13
Pump - fuel .................................................................................................................................... 19-2-13
Tank - fuel ...................................................................................................................................... 19-2-15
Filler tube - fuel ............................................................................................................................. 19-2-16

GENERAL INFORMATION
03-5
Electricity and heating:
lkeep doors and windows closed in the winter;
lswitch off machinery or lights when not needed;
luse energy efficient heating systems;
lswitch off computers and photocopiers when
not needed.
Fuel:
ldon't run engines unnecessarily;
lthink about whether journeys are necessary and
drive to conserve fuel.
Water:
ldon't leave taps and hose pipes running;
lmend leaks quickly, don't be wasteful.
Compressed air:
ldon't leave valves open;
lmend leaks quickly;
ldon't leave the compressor running when not
needed.
Use of environmentally damaging materials:
lcheck whether a less toxic material is available.
Handling and storage of materials:
lhave the correct facilities available for handling
liquids to prevent spillage and wastage as listed
above;
lprovide suitable locations for storage to prevent
frost damage or other deterioration.
Waste Management
One of the major ways that pollution can be reduced
is by the careful handling, storage and disposal of all
waste materials that occur on sites. Legislation
makes it illegal to dispose of waste materials other
than to licensed waste carriers and disposal sites.
This means that it is necessary to not only know what
the waste materials are, but also to have the
necessary documentation and licenses.
Handling and storage of waste
Ensure that waste materials are not poured down the
drain or onto soils. They should be stored in such a
way as to prevent the escape of the material to land,
water or air.
They must also be segregated into different types of
waste e.g. oil, metals, batteries, used vehicle
components. This will prevent any reaction between
different materials and assist in disposal.
Disposal of waste
Disposal of waste materials must only be to waste
carriers who are licensed to carry those particular
waste materials and all the necessary
documentation must be completed. The waste
carrier is responsible for ensuring that the waste is
taken to the correct disposal sites.Dispose of waste in accordance with the following
guidelines.
lFuel, hydraulic fluid, anti-freeze and oil: keep
separate and dispose of to specialist contractor.
lRefrigerant: collect in specialist equipment and
reuse.
lDetergents: safe to pour down the foul drain if
diluted.
lPaint, thinners: keep separate and dispose of
to specialist contractor.
lComponents: send back to supplier for
refurbishment, or disassemble and reuse any
suitable parts. Dispose of the remainder in
ordinary waste.
lSmall parts: reuse any suitable parts, dispose
of the remainder in ordinary waste.
lMetals: can be sold if kept separate from
general waste.
lTyres: keep separate and dispose of to
specialist contractor.
lPackaging: compact as much as possible and
dispose of in ordinary waste.
lAsbestos-containing: keep separate and
dispose of to specialist contractor.
lOily and fuel wastes (e.g. rags, used spill kit
material): keep separate and dispose of to
specialist contractor.
lAir filters: keep separate and dispose of to
specialist contractor.
lRubber/plastics: dispose of in ordinary waste.
lHoses: dispose of in ordinary waste.
lBatteries: keep separate and dispose of to
specialist contractor.
lAirbags - explosives: keep separate and
dispose of to specialist contractor.
lElectrical components: send back to supplier
for refurbishment, or disassemble and reuse
any suitable parts. Dispose of the remainder in
ordinary waste.
lElectronic components: send back to supplier
for refurbishment, or disassemble and reuse
any suitable parts. Dispose of the remainder in
ordinary waste.
lCatalysts: can be sold if kept separate from
general waste
lUsed spill-absorbing material: keep separate
and dispose of to specialist contractor.
lOffice waste: recycle paper and toner and ink
cartridges, dispose of the remainder in ordinary
waste.

GENERAL DATA
04-5
Idle speed:

All loads off 660 ± 50 rev/min

Base idle speed Non-adjustable

Idle air control (IAC) valve position Checked via TestBook
CO at idle:

Catalyst vehicles 0.5 %

Non-catalyst vehicles 0.5 - 1.0 %
Valve timing
Inlet valves:

Opens 28° BTDC

Closes 77° ABDC
Exhaust valves:

Opens 66° BBDC

Closes 39° ATDC
Fuel grade:

High compression catalyst vehicles 95 RON minimum unleaded

Low compression catalyst vehicles 91 RON minimum unleaded

Non-catalyst vehicles 97 RON leaded
Lubrication
Type Wet sump, pressure fed
Pump type Crankshaft driven eccentric rotor
Oil filter Disposable canister with full flow by-pass
Pressure at idle - minimum 0.7 bar (10 lbf.in
2)
Pressure at 2000 rev/min (hot) 3.4 bar (50 lbf.in
2)
Relief valve opening pressure 3.4 bar (50 lbf.in
2)
Low oil pressure switch opening pressure 0.24-0.41 bar (3.5-6.0 lbf.in
2)
Crankshaft
Main journal diameter 63.487 - 63.500 mm (2.4995 - 2.520 in)
Crankpin journal diameter 55.500 - 55.513 mm (2.20 - 2.22 in)
End float 0.08 - 0.26 mm (0.003 - 0.010 in)
Maximum ovality 0.040 mm (0.002 in)
Main bearings
Quantity 5
Material Glacier Vandervell / AS 15
Diametrical clearance 0.015 - 0.016 mm (0.00059 - 0.00063 in)
Connecting Rods
Type Horizontally split big-end, plain small end
Distance between centres 155.120 - 155.220 mm (6.1071 - 6.1110 in)

GENERAL DATA
04-8
Fuel system - Td5
Type Direct injection from pressure regulated supply with cooled return
flow and in-line pressure regulator
Pressure regulator setting 4 bar (58 lbf.in
2)
Pump Electric two stage submersible
Pump output:

Low pressure 30 l/h (6.6 gal/h) (7.93 US gal/h) at 0.5 bar (7.25 lbf.in
2)

High pressure 180 l/h (39.6 gal/h) (47.55 US gal/h) at 4 bar (58 lbf.in
2)
Maximum consumption 30 l/h (6.6 gal/h) (7.93 US gal/h)
Injectors Electronic unit injectors
Injector nominal operating pressure:

Pre EU3 models 1500 bar (21750 lbf.in
2)

EU3 models 1750 bar (25500 lbf.in
2)
Filter In-line canister filter/water separator with water detection
Air cleaner Mann and Hummell P0037

GENERAL DATA
04-9
Fuel system - V8
Cooling system - Td5
Type Multiport injection from pressure regulated, returnless supply
Pump Electric submersible
Regulated pump output pressure 3.5 bar (50.75 lbf.in
2)
Fuel pump delivery 120 litres/hr (211 pints/hr) (234 US pints/hr)
Filter In-line canister
Air filter Mann and Hummell P0036
Type Pressurised, spill return partial flow, thermostatically controlled
Cooling fans 11 blade axial flow on viscous coupling and 11 blade axial flow
electric
Electric cooling fan switching points:
For A/C system:

On When vehicle speed is 50 mph (80 km/h) or less and ambient
temperature is 28 °C (82 °F) or more

Off When vehicle speed increases to 62.5 mph (100 km/h) or ambient
temperature decreases to 25 °C (77 °F)
For engine cooling during normal running:

On 110 °C (230 °F)

Off 105 °C (221 °F)
For engine cooling at ignition off (to counteract heat
soak):

On If, within 10 seconds of ignition off, engine coolant temperature is
105 °C (221 °F) or more

Off After 10 minutes or if engine coolant temperature decreases to
100 °C (212 °F)
Coolant pump Centrifugal impeller, belt driven from crankshaft
Thermostat Waxstat with pressure relief valve
Thermostat opening temperature:

Initial opening 82 °C (179 °F)

Fully open 96 °C (204 °F)
Expansion tank cap relief valve - system operating
pressure1.4 bar (20.3 lbf.in
2)
Fuel cooler thermostat opening temperature 82°C (179°F)