2002 JEEP LIBERTY wire

[x] Cancel search: wire

Page 1683 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual The blower motor is located on the passenger side
of the vehicle under the dash
(1) Disconnect and isolate the battery negative
cable.
(2) Unplug the blower motor wire harness connec-
tor (Fig. 2).
(3

Page 1695 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual (3) To duplicate a high-ambient temperature condi-
tion (high head pressure), restrict the air flow
through the condenser. Install a manifold gauge set
to be certain that the discharge pressure does n

Page 1697 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual (5) Plug in the compressor clutch coil wire harness
connector.
(6) Connect the battery negative cable.
(7) Evacuate the refrigerant system. (Refer to 24 -
HEATING & AIR CONDITIONING/PLUMBING -
STANDAR

Page 1698 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual INSTALLATION
WARNING: REVIEW THE WARNINGS AND CAU-
TIONS IN THE FRONT OF THIS SECTION BEFORE
PERFORMING THE FOLLOWING OPERATION.
(Refer to 24 - HEATING & AIR CONDITIONING/
PLUMBING - WARNING) (Refer t

Page 1699 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual (7) Remove the suction and discharge line assem-
bly from the vehicle.
INSTALLATION
WARNING: REVIEW THE WARNINGS AND CAU-
TIONS IN THE FRONT OF THIS SECTION BEFORE
PERFORMING THE FOLLOWING OPERATION.

Page 1700 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual and the condenser outlet. Connect the liquid line to
the evaporator inlet and condenser outlet refrigerant
line couplers. (Refer to 24 - HEATING & AIR CON-
DITIONING/PLUMBING - STANDARD PROCE-
DURE -

Page 1701 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual (7) Remove the suction and discharge line assem-
bly from the vehicle.
INSTALLATION
WARNING: REVIEW THE WARNINGS AND CAU-
TIONS IN THE FRONT IF THIS SECTION BEFORE
PERFORMING THE FOLLOWING OPERATION.

Page 1703 of 1803

JEEP LIBERTY 2002 KJ / 1.G Workshop Manual replaced. (Refer to 24 - HEATING & AIR CONDI-
TIONING/PLUMBING/LIQUID LINE - REMOVAL)
ACCUMULATOR
DESCRIPTION
The accumulator is mounted in the engine com-
partment between the evaporator coil outlet