2002 HONDA PASSPORT wheel

81Instruments and Controls
Shifting the Transfer Control
Lever
4H
↔ 4L: Stop the vehicle. Place
the transmission lever in
“N” (Neutral) position.
Then move the transfer
control lever from 4H to
4L, or 4L to 4H.
Move the transfer control lever
quickly and securely between
positions. Do not stop midway.
The transfer gear box can be
damaged if the control lever is not
firmly in gear. Some noise is
normal when shifting.
Always stop the vehicle before
shifting between low and high
range (4H
4L or 4L
4H).
If the 4WD indicator continues to
blink rapidly, it indicates that the
system was shifted out of
sequence. Stop the vehicle, select
4WD with the 4WD-2WD switch, shift the lever from 4L to 4H, then
select 2WD. Drive in a straight
line to reset the system. If the
indicator continues to blink, see
your Honda dealer.
Do not use 4-wheel drive for
driving on dry pavement. This
causes noise and wear, and taking
tight turns can damage the
transfer case and driveshafts. It
also reduces fuel economy.
Be careful that you do not exceed
the following maximum allowable
speeds when accelerating.
mph (km/h)
RangeAutomatic TransmissionRange“L”“2”“3”
“2H”35 (56)65
(105)–
“4H”35 (56)65
(105)65
(105)
“4L”15 (24)30 (48)50 (81)
Driving Pattern Selector
You can select a driving pattern
suitable for existing driving
conditions.
When neither “POWER” nor
“
WINTER” lights are illuminated,
the normal driving program for
general driving conditions is
operative.

MANUAL TRANSMISSION SHIFT SPEED CHART
Transmission Type
5-Speed Manual First to
Second Second to
Third Third to
Fourth Fourth to
Fifth
15 mph
(25 km/h) 25 mph
(40 km/h) 40 mph
(65 km/h) 45 mph
(70 km/h)
84Instruments and Controls
Shift Speed Chart
The lower gears of the
transmission are used for normal
acceleration of the vehicle to the
desired cruising speed. The
highest gear of the transmission is
used to maintain the desired
speed. The fifth gear is
recommended for use in
maintaining highway cruising
speeds. Use of the fifth gear in
city traffic is not recommended.
The shift speed chart shows the
speeds at which each upshift of
the transmission should be made
to get the best vehicle
performance and fuel economy. For cruising, choose the highest
gear for that speed (cruising speed
is defined as a relatively constant
speed operation).
The upshift indicator (
U/S) lights
to show recommended upshift
points. (Refer to “Indicator
Lights.”)
If the engine is “lugging” (the
speed you are traveling at is too
slow for the gear the transmission
is in), downshift to the next lower
gear. You may need to downshift
two or more gear positions to
keep the engine from “lugging” or
to keep the performance at a
satisfactory level.
Transfer Control
4WD Models
The “4WD” indicator light
illuminates when 4WD is engaged
with the 4WD-2WD switch.
“2H” (High Range, 2-Wheel
Drive)
Use this for normal driving on dry
pavement. This position gives
greater economy, quieter ride and
least drivetrain wear.

85Instruments and Controls
“4H” (High Range, 4-Wheel
Drive)
Use this for normal driving on
gravel, wet, icy or snow-covered
roads. This position provides
greater traction than two-wheel
drive. Top speed is limited to 65
mph (105 km/h).“4L” (Low Range, 4-Wheel
Drive)
Use this for maximum power and
traction. Top speed is limited to
65 mph (105 km/h). Use
“4L” for
climbing or descending steep
hills, off-road driving, and hard
pulling in sand, mud or deep
snow.
Operating the 4WD-2WD Switch
2H  4H: To shift between
ranges, push the switch
with the vehicle going in
a straight line at any
speed below 65 mph
(105 km/h). The 4WD
indicator will blink for a
short time as the system
completes the shift.
Taking your foot off the
accelerator pedal for a
moment will help to
engage the new range. Shifting the Transfer Control
Lever
4H
↔ 4L: Stop the vehicle.
Depress the clutch, then
move the transfer control
lever from 4H to 4L, or
4L to 4H.
Move the transfer control lever
quickly and securely between
positions. Do not stop midway.
The transfer gear box can be
damaged if the control lever is not
firmly in gear. Some noise is
normal when shifting.
If the 4WD indicator continues to
blink rapidly, it indicates that the
system was shifted out of
sequence. Stop the vehicle, select
4WD with the 4WD-2WD switch,
shift the lever from 4L to 4H, then
select 2WD. Drive in a straight
line to reset the system. If the
indicator continues to blink, see
your Honda dealer.

87Instruments and Controls
parking brake first, then place the
transmission in “P” (Park)
position, even on level surfaces.
When parking a vehicle equipped
with a manual transmission on an
upward slope or on a level
surface, place the shift lever in the
“1” (first gear) position.
When parking a vehicle equipped
with a manual transmission on a
downward slope, place the shift
lever in the “R” (Reverse)
position.
The accelerator pedal is used to
vary engine power and thus
regulate engine and vehicle speed.
ACCELERATOR
PEDAL
Manual Transmission
The clutch pedal is used to engage
or disengage the clutch, thereby
connecting or disconnecting the
engine from the manual
transmission and driveline to the
driving wheels.
CLUTCH
PEDAL
When the pedal is fully released,
the clutch is engaged, driving the
transmission and the drive wheels.
Do not allow your foot to rest on
the clutch pedal when not using
the clutch.
Accelerator PedalClutch Pedal

99Interior Features
Keys and Ignition
100
. . . . . . . . .
Steering Column Lock/
Ignition Switch101 . . . . . . .
LOCK101
. . . . . . . . . . . . .
ACC101
. . . . . . . . . . . . . . .
ON101
. . . . . . . . . . . . . . . .
START101
. . . . . . . . . . . . .
Key Removal102 . . . . . . . . . .
Key Reminder102 . . . . . . . . .
Guard Against Theft102 . . . .
Locks103 . . . . . . . . . . . . . . . . . .
Power Door Locks104 . . . . . .
Child-Safe Door Locks105 . .
Mirrors105 . . . . . . . . . . . . . . . . .
Interior Mirror105 . . . . . . . . .
Power Mirrors105 . . . . . . . . .
Vanity Mirrors106 . . . . . . . . . Power Windows107
. . . . . . . . . .
Checking the Circuit
Breaker108 . . . . . . . . . . . . .
Tailgate 108 . . . . . . . . . . . . . . . .
Operation108 . . . . . . . . . . . . .
Hood Release109 . . . . . . . . . . . .
Interior Lights110 . . . . . . . . . . .
Luggage Light110 . . . . . . . . .
Dome Light111 . . . . . . . . . . .
Courtesy Lights112 . . . . . . . .
Map Lights112 . . . . . . . . . . . .
Moonroof112 . . . . . . . . . . . . . . . Conveniences113
. . . . . . . . . . . .
Beverage Holder 113 . . . . . . .
Sun Visor114 . . . . . . . . . . . . .
Glove Box114 . . . . . . . . . . . .
Assist Grip115 . . . . . . . . . . . .
Horn Button115 . . . . . . . . . . .
Tilt Steering Wheel 115 . . . . .
Cigarette Lighter116 . . . . . . .
Ashtrays116 . . . . . . . . . . . . . .
Accessory Power Outlets117 .
Interior Features

101Interior Features
Your Passport comes with two
keys.
METAL PLATE
WITH KEY CODE
The key code number is stamped
on the metal plate attached to the
key ring.
For vehicle security:
•Record the key code number.
•Keep the key code number
plate in a safe place,
NOT IN
THE VEHICLE
. If the original keys are lost,
duplicates can be made using the
key code number. Contact any
Honda dealer or a locksmith.
Steering Column
Lock/Ignition Switch
The ignition switch, on the right
side of the steering column, has
five positions:
LOCK
— The normal parking
position. This locks the steering
and prevents normal use of the
steering wheel.
The key can be removed only
when the ignition is in this
position. On automatic
transmission models, the ignition
switch cannot be turned to the
“
LOCK” position unless the shift
lever has first been placed in the
“P” position. The shift lever is
then locked.
ACC (Accessory)—In this
position, you can use some
electrical accessories when the
engine is not running.
ON—The normal driving
position.
START—This position starts the
engine. The switch returns to
ON
when you release the key.
Keys and Ignition

102Interior Features
The anti-theft steering column
lock is not interconnected with the
parking brake. You must always
set the parking brake when
leaving the vehicle.
To prevent discharging the battery,
avoid use of electrical accessories
with the engine shut off.
For easier key operation when
unlocking, rotate the steering
wheel slightly to relieve pressure
on the steering lock.
Key Removal
Manual Transmission
With the vehicle fully stopped,
remove the key from the switch
by turning it to the “
LOCK”
position and removing it.
Removing the key from the
ignition switch while driving
locks the steering. This can
cause you to lose control.
Remove the key from the
ignition switch only when
parked.
Automatic Transmission
With the vehicle fully stopped, place
the automatic transmission shift
lever in “P” (Park) position. Turn
the key to the “
LOCK” position.
Key Reminder
The key reminder circuit causes a
beeper to sound when the door is
held open with the key left in the
ignition switch. This is to help
prevent accidentally locking the
key inside the vehicle. The beeper stops when the door is
closed or when the key is removed.
Guard Against Theft
Your new Passport has features to
help prevent theft of the vehicle,
its equipment, and its contents.
These anti-theft features work
depending on how well you use
them.
•Park in a well-lighted area
whenever possible.
•Lock the steering column and
take the key with you.
–
Turn the ignition switch to
“
LOCK” and remove the key.
This locks both the ignition
switch and steering control.

115Interior Features
Assist Grip
An assist grip is located above
each window.
Horn Button
To sound the horn, press the
center of the steering wheel
airbag.
HORN AREA
Tilt Steering Wheel
See page 15 for important
information about how to properly
position the steering wheel.
The release lever for the tilt
steering wheel is on the left side
of the steering column.
To adjust the height of the
steering wheel, push up on the
lever. The steering wheel has six