1-9
3. Pull up on the strap loop
located at the rear of
the seat cushion and
pull the seat cushion up.
Then fold it forward.
4. Pull the seatback forward and fold it down until
it is flat.
If the seatback cannot fold flat because it interferes with
the cushion, try moving the front seat forward and/or
bringing the front seatback more upright.Returning the Seats to an Upright Position
To return the seat to the upright position,
do the following:
1. Lift the seatback up and push it rearward
all the way.
2. Lower the seat cushion until it latches
into position.
3. Pull forward on the seatback and up on the seat
cushion to make sure the seat is securely in place.
4. Return the headrest to the upright position by
pulling the top of the headrest upwards until
you hear a click.
5. Check to see that the safety belt buckles on
the driver's side seatback are accessible to the
outboard and center occupants and are not under
the seat cushions.
