2-92 Trip
Each press of the TRIP button will change the
display between personal trip computer, business trip
computer, timer, vehicle history, annual mileage and
a blank display.
Personal Trip Computer and Business
Trip Computer
Each press of the arrow button will change the
display between turn on/off, trip odometer, fuel used,
average fuel economy and average speed.
The ON/OFF button will turn the trip computer on
and off. The information on the trip computer only
gets updated when it is turned on. The personal and
business computers are independent, i.e. turning one
of them on does not turn the other off.
All information associated with the trip computer
will be reset when the RESET button is pressed.
If the RESET button is pressed and held for more
than two seconds, all of the trip computer settings
will reset starting from the last ignition cycle
(turning the ignition from OFF to RUN). This
feature is for someone who has forgotten to reset the
trip computer when pulling out of the driveway and
does not realize it until after driving for awhile.Timer
Each press of the ON/OFF button will turn the timer
on or off.
The RESET button will reset the timer to 00:00:00.
If turned on, the timer will accumulate whenever
the SIC is powered (the engine does not have to
be running).
The timer will rollover after 99:59:59.
Vehicle History Last 15 Days
The first press of the arrow button will display the
maximum speed and accumulated mileage for the
current day.
Every press of the arrow button after will display the
maximum speed and accumulated mileage for the
previous day.
This feature requires the date and time to be set
correctly. Refer to the setting of day/date/time under
the MENU button explained later in this section.
2-93
Annual Mileage
The annual mileage displayed is the mileage
accumulated since the annual mileage was reset.
Pressing the RESET button will reset the annual
mileage to 0.
Pressing the arrow button will display the ratio of
personal trip computer mileage to annual mileage
as a percent.
Pressing the arrow button again will display the ratio
of business trip computer mileage to annual mileage
as a percent.
Menu
Press the MENU button to choose a feature you would
like to personalize (the features are listed below). Each
press of the button will display a new item that can be
personalized. Use the arrow button to choose the
setting you would like to use within the chosen feature.
For example: Say you would like to personalize the
automatic door locks so that the automatic locking
feature is disabled. You would do the following:
1. First press the MENU button until you reach the
Automatic Door Lock screen.2. Next, press the arrow button until you find the
Disabled setting.
3. The setting is now actually set without having to
do anything else. You can do one of three things
at this point:
You can leave the personalization mode by
pressing FUEL or TRIP.
You can just let the SIC exit the personalization
mode on its own by waiting approximately
15 seconds without touching any buttons,
or you can press the MENU key to move on to
the next programmable feature.
The following is a list of the personal settings that can
be changed:
Automatic Door Lock
Enabled: Doors automatically lock when
transmission is shifted out of PARK (P).
Disabled: Doors do not lock automatically.
