2002.5 Peugeot 406 radio

29-07-2002
10 Instrument dials.
11 Driver's air bag.
Horn.
12 Windscreen washwipe
stalk.
Trip computer stalk.
13 Radio remote control stalk.
14 Steering lock and ignition.
15 Electric mirror controls.
Window controls.
Rear window locking
control.
16 Electronic Stability
Programme (ASR/ESP)
switch.
17 Headlamp height adjust
ment.
18 Fuse box. 19
Steering wheel adjustment.
20 Cruise control
21 Rear ashtray.
22 Cupholder.
23 Handbrake.
24 Heated seat switches.
Passenger air bag
disarming switch.
Alarm button
25 Lighter.
26 Rear footwell heating vent.
27 Front ashtray.
28 Gear lever.
29 Radio.
30 Heating/ventilation controls.
31 Multifunction display.
YOUR 406 AT A GLANCE
3
1 Speaker (tweeter) location.
2 Window demisting vent.
3 Side adjustable heating/
ventilation vent and air flow
regulation.
4 Glove box.
5 Passenger air bag.
6 Windscreen demisting vents.
7 Central adjustable heating/
ventilation vents and air flow
regulation.
8 Hazard warning lights switch.
9 Lights and direction indica
tors stalk.
Arming/disarming of auto
matic switching on of lights.

29-07-2002
Display BThis enables the following information to be displayed:
– the time,
– the date,
– the outside temperature (the °C symbol flashes when there is a risk of ice),
– the radio displays,
– the status of the doors. The display shows you whether a doo r, the boot or the
bonnet is open and if the fuel filler cap is missing.
– the warning messages (e.g. ''battery low'') or information messa ges (e.g. "top
up fuel tank''), displayed temporarily, can be cleared by pressin g button 1or 2
– the trip computer.
Setting the parameters
Press button 1for two seconds to access the settings. The information flashes
to show it is ready to be modified.
Then, individual presses on button 1 allow you to scroll through the various data
in the following sequence:
– language in which the information is displayed,
– unit of distance (kms or miles),
– unit of temperature (Celsius or Fahrenheit),
– time format (12 then 24 hour mode)
– hour,
– minutes,
– year,
– month,
– day,
Pressing button 2allows you to change the information selected. Maintain the
pressure for rapid scrolling.
After ten seconds without action, the display returns to the ma in screen and the
modified data are recorded.
YOUR 406 IN DETAIL 135

29-07-2002
Display CThis enables the following information to be displayed:
– the time,
– the date,
– the outside temperature (the °C symbol flashes when there is a risk of ice),
– the radio displays,
– the status of the doors. The display shows you whether a doo r, the boot or the
bonnet is open,
– the warning messages are displayed temporarily (e.g. "top up fue l tank'') and
can be cleared using the remote control,
– the trip computer (see following page),
– the satellite navigation system (see corresponding section).
Setting the parameters
The remote control allows you to access the settings. Accessing the different
menus is described in the section on the Satellite Navigation System.
YOUR 406 IN DETAIL
136

YOUR 406 IN DETAIL
62
AUDIO RB2
Angle your aerial, following
the line of the windscreen.
1 – Press (behind)
2 – Press (behind)
Recommended angle for
the aerial (saloon)
Function
Increase volume
Decrease volume
1+2 – Simultaneous press
3 – Press Cutting off the sound (mute); restoring the sound by pressing
any button
Automatic search of higher frequencies (radio)
Selection of next track (CD and cassette)
4 – Press Automatic search of lower frequencies (radio)
Selection of previous track (CD and cassette)
5 – Press the end Source selection
(radio, cassette, CD changer)
6 – Rotation
(clockwise) Selection of higher frequency station stored in memory (radio)
Selection of next CD Reversal of direction of play (cassette)
7 – Rotation
(anticlockwise) Selection of lower frequency station stored in memory (radio)
Selection of previous CD
Reversal of direction of play (cassette)Movement
29-07-2002

YOUR 406 IN DETAIL63
Button
Function
A ON VOL Radio on/off. Adjustment of volume.
B RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
CTATraffic information priority on/off.
D Press fully: cassette rewind.
EPress fully: cassette fast forward.
D+ E   Press halfway: reversal of direction of play of the cassette.
  Press fully: ejection of the cassette.
F Increasing the bass/treble setting.
G Decreasing the bass/treble setting.
H AUDIO Adjustment of bass, treble, loudness and sound distribution.
I SRC Source selection: radio, cassette or CD changer.
Press for more than 2 seconds: CD shuffle.
J Automatic search of higher frequency.
Selection of next CD track.
K Automatic search of lower frequency.
Selection of previous CD track.
L MAN
Manual/automatic operation of buttons Iand Jin radio mode.
M BND Selection of FM1, FM2, FMast and AM wavebands.
ASTPress for more than 2 seconds: storing of a station in the memory (au tostore).
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD.
29-07-2002

29-07-2002
GENERAL FUNCTIONS
On / offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
Antitheft system
The set is coded in such a way that it can operate only on yo ur vehicle. It would not function if fitted to another vehicle.
The antitheft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume Turn button Ato increase or reduce the volume.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS), treble (TREB), loudness (LOUD), fader
(FAD) and balance (BAL).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
"AUDIO" button after adjusting the balance.
Note: bass and treble settings are specific to each source. It is possibl e to set them differently for radio, cas
sette or CD changer.
YOUR 406 IN DETAIL
64

29-07-2002
YOUR 406 IN DETAIL
66
RADIO
Notes on radio reception
Car radio receivers are subject to phenomena which do not affect domestic radio sets. Both MW/LW and FM reception are
subject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of the
signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of increasing distance from the transmitter, deflection of the signals by obstacles
(mountains, hills, buildings etc), or of being in an area wh ich is not covered by a transmitter.
Selecting radio mode Press the "SRC" button until the radio is selected.
Selecting a waveband Briefly press the " BAND/AST" button to select the FM1, FM2, FMast and AM wavebands.
Automatic station search Briefly press button Jor Kto search for the station immediately above or below.
By continuing to press the button in the direction selected, you will obtain contin
uous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
If the TAtraffic programme is selected, only stations broadcasting this type of pro
gramme are selected.
Searching for a station occurs first in "LO"sensitivity (selection of the most powerful transmitters) during scann ing of the
waveband, then in "DX"sensitivity (selection of the weakest and most distant transmitters).

29-07-2002
YOUR 406 IN DETAIL
68
RDS
Using the RDS (Radio Data System) function on FM Radio Data System allows you to continue listening to the sa me station, whatever frequency it is using for the
region you are going through.
Briefly press the " RDS" button to switch the function on or off.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA" button to switch the function on or off.
Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD
changer).
If you wish to interrupt a message, press the " TA" button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are
broadcast.
Regional following mode
When they are part of a network, certain stations broadcast regi onal programmes in the various areas they serve. With
regional following mode, you can keep listening to the same programme.
Press the " RDS" button for more than two seconds to switch the function on or off.