Page 46 of 174
29-07-2002
YOUR 406 IN DETAIL
72
Angle your aerial, following
the line of the windscreen. Recommended angle for
the aerial (saloon)
AUDIO RM2
1 –
Press (behind)
2 – Press (behind) Function
Increase volume
Decrease volume
1+2 – Simultaneous
press
3 – Press Cutting off the sound (mute); restoring the sound
by pressing any button
Automatic search of higher frequencies (radio)
Selection of next track (CD and cassette)
4 – Press Automatic search of lower frequencies (radio)
Selection of previous track (CD and cassette)
5 – Press
the end Source selection (radio/cassette/CD changer)
6 – Rotation
(anti clockwise)
Selection of higher frequency station stored in memory (radio)
Selection of next CD Reversal of direction of play (cassette)
7 –Rotation
(anti clockwise) Selection of lower frequency station stored in
memory (radio) Selection of previous
CD Reversal of direction of play (cassette)
Movement
Page 47 of 174

29-07-2002
ButtonFunction
A ON/VOL Radio on/off. Adjustment of volume.
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Cassette selection. Reversal of the direction of play of the cassette.
Press for more than 2 seconds: noise reduction.
D CD changer selection.
Press for more than 2 seconds: shuffle.
E Ejection of the cassette.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Adjustment of bass, treble, loudness ,sound distribution and
automatic volume correction.
K Automatic search of higher frequency.
Selection of next track cassette and CD.
L Automatic search of lower frequency.
Selection of previous track cassette and CD.
L MAN Manual/automatic operation of buttons Kand Lin radio mode.
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD.
YOUR 406 IN DETAIL 73
Page 48 of 174

29-07-2002
GENERAL FUNCTIONS
On/offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
Anti theft system
The audio system is coded in such a way that it can operate on ly on your vehicle. It would not function if fitted to another
vehicle.
The anti theft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume Turn button Ato increase or decrease the volume.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS), treble(TREB), loudness (LOUD), fader
(FAD) , balance (BAL)and automatic volume correction (CAV).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
" AUDIO " button after configuration of the automatic volume correction .
Note: bass and treble settings are specific to each source. It is possibl e to set them differently for radio,
cassette or CD changer.
YOUR 406 IN DETAIL
74
Page 50 of 174

29-07-2002
RADIO
Notes on radio reception
Car radio receivers are subject to phenomena which do not affect domestic radio sets. Both MW/LW and FM reception are
subject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of the
signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of increasing distance from the transmitter, deflection of the signals by obstacles
(mountains, hills, buildings etc), or of being in an area wh ich is not covered by a transmitter.
Selecting radio mode Press button B.
Selecting a waveband Briefly press button Bto select the FM1, FM2, Fmast and AM wavebands.
Automatic station search Briefly press button K or Lto search for the station immediately above or below.
By continuing to press the button in the direction selected, you will obtain contin
uous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
If the TAtraffic programme is selected, only stations broadcasting this type of programme are selected.
Searching for a station occurs first in " LO" sensitivity (selection of the most powerful transmitters) during scan ning of the
waveband, then in " DX" sensitivity (selection of the weakest and most distant transmitte rs).
To make a direct search in " DX" sensitivity, press button Kor Ltwice.
YOUR 406 IN DETAIL
76
Page 52 of 174

RDS
Using the RDS (Radio Data System) function on FMRadio Data System allows you to continue listening to the sa me station, whatever frequency it is using for the
region you are going through.
Briefly press the " RDS" button to switch the function on or off;
the display will show: "RDS" if the function is selected.
"(RDS)" if the function is selected but not available.
RDS station following
The display indicates the name of the station selected. The radio is continually searching for the station which has the best
reception and which is transmitting the same programme.
Traffic information programme
Press the "TA" button to switch the function on or off.
The display will show: " TA " if the function is selected,
"(TA)" if the function is selected but not available.
Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD changer).
If you wish to interrupt a message, press the " TA" button; this switches the function off.
Note: the volume of traffic information announcements is inde pendent of the volume of normal radio listening. You
can adjust it using the volume button. The setting will be stored and will be used when the next messages are
broadcast.
YOUR 406 IN DETAIL
78
29-07-2002
Page 58 of 174
29-07-2002
YOUR 406 IN DETAIL
84
Angle your aerial, following
the line of the windscreen.Recommended angle for
the aerial (saloon)
AUDIO RD3
1 – Press (behind)
2 – Press (behind) Function
Increase volume
Decrease volume
1+2 – Simultaneous
press
3 – Press Cutting off the sound (mute); restoring the sound
by pressing any button
Automatic search of higher frequencies (radio)
Selection of next track (CD)
4 – Press Automatic search of lower frequencies (radio)
Selection of previous track (CD)
5 – Press the end Source selection (radio/CD/CD changer)
6 – Rotation
(anti clockwise) Selection of higher frequency station stored in
memory (radio) Selection of next CD (CD changer)
7 –Rotation
(anti clockwise) Selection of lower frequency station stored in
memory (radio) Selection of previous CD
(CD changer)
Movement
Page 59 of 174

29-07-2002
ButtonFunction
A ON/VOL Radio on/off.Adjustment of volume
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Source selection: CD.
Press for more than 2 seconds: shuffle.
D Source selection: CD changer.
Press for more than 2 seconds: shuffle.
E Ejection of the CD.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Setting of bass, treble, loudness, sound distribution
and automatic volume correction.
K
Automatic search of higher frequency.
Selection of next CD track.
L
Automatic search of lower frequency.
Selection of previous CD track.
M MAN Manual/automatic operation of buttons K and L.
1 to 6 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a CD in the CD changer.
YOUR 406 IN DETAIL 85
Page 60 of 174

29-07-2002
GENERAL FUNCTIONS
On/offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
ANTI THEFT SYSTEM
The audio system is coded in such a way that it can operate on ly on your vehicle. It would not function if fitted to another vehicle.
The anti theft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume
Turn button Ato increase or decrease the volume of the set.
Note: If you have a telephone fitted with a "mute"signal output connected to the set, the set will automati
cally change to " mute" when the telephone is used.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS),treble(TREB), loudness (LOUD), fader
(FAD) , balance (BAL)and the automatic volume correction (CAV).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
" AUDIO " button after configuration of the automatic volume correction .
Note: the bass and treble settings are specific to each source. It is p ossible to set them differently for radio,
CD, or CD changer.
YOUR 406 IN DETAIL
86