2002.5 Peugeot 406 ECO mode

29-07-2002
COMPACT DISC
Selecting CD player modeAfter inserting a disc, with the printed surface upwards, the p layer starts automatically.
If a disc is already inserted, press button C.
Ejecting a disc Press button E to eject the disc from the player.
Selecting a track Press button K to select the next track.
Press button Lto return to the start of the current track or to select the previ ous
track.
Accelerated play
Press the "MAN"button.
Press and hold button K or Lfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Buttons K or Lresume the "track selection" function when the "MAN"button is pressed again.
Shuffle (RDM) When the CD player is selected, keep button C pressed for two seconds. The tracks will be played in ran
dom sequence. Pressing button Cagain for two seconds returns you to normal play.
YOUR 406 IN DETAIL
92
The use of copied compact discs may cause malfunctions.

29-07-2002
CD CHANGER
Selecting CD changer modePress button D.
Selecting a disc Press buttons "1"to "6" to select the corresponding disc.
Selecting a track Press button Kto select the next track.
Press button Lto return to the start of the current track or to select the previ ous
track.
Accelerated play
Press the "MAN"button.
Press and hold button K or Lfor forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Buttons K or Lresume the "track selection" function when the "MAN"button is pressed again.
Shuffle (RDM) When the CD changer is selected, keep button D pressed for two seconds. The tracks will be played in ran
dom sequence. Pressing button D again for two seconds returns you to normal play.
YOUR 406 IN DETAIL 93

29-07-2002
THE SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation system guides
you to the destination of your choice
by means of vocal and visual instruc
tions.
The heart of the system lies in the use
of a map database and GPS (Global
Positioning System). This enables
your position to be located by means
of several satellites.
The satellite navigation system con
sists of the following components:
the remote control,
the display,
the control unit,
the last voice message recall control,
the CD ROM.
Some functions or services
described in this guide may vary depending on the CD ROM version or the country.The remote control
There is a storage compartment for the remote control in front of the ashtray.
Pointing the remote control at the screen enables the informat ion contained in
the various menus to be selected.
Direction arrows:
These enable you to move around the screen and
thus select a function.
On the welcome screen only, the Up and Down
buttons enable the brightness of the screen to be
adjusted.
menu : this button allows access to the main menu. It can
be used at any time.
esc : escape button
"Short press": cancels the current operation and
returns to the previous screen.
"Press for more than 2 seconds": returns to the
welcome screen.
This button can be used in any menu. It is inactive
during guidance.
mod : mode button
"Short press": changes between date, navigation
and radio.
val : Confirmation button
Confirms the function selected.
YOUR 406 IN DETAIL 95

29-07-2002
AUTOMATIC SWITCHING ON
OF THE LIGHTS
Side lights and dipped beam head
lamps switch on automatically if the
light is poor, or during continuous
operation of the windscreen wipers.
They switch off as soon as the light
becomes bright enough or the wind
screen wipers stop.
This function is active when the vehi
cle is supplied to the customer.
To disarm or activate the function: Place the key in the accessories
position (1st notch),
 Press the end of the lights stalk
for more than two seconds.
Note: In foggy weather, the bright
ness sensor can detect sufficient
light. Because of this, the lights do
not come on automatically.
Do not cover the brightness sen
sor connected to the rain sensor,
located in the windscreen behind
the mirror. It is used for automatic
switching on of the lights. Operating check
Activation
Activation of this function is accom
panied by an audible signal and the
message
"Automatic lighting of
the headlamps activated" on the
multifunction display.
Note: Always operate the lighting
controls manually where this is pos
sible.
Disarming
Disarming of the function is accom
panied by an audible signal.
When driving, if this function is
switched off when the headlamps
would switch on in automatic mode,
the lights remain on.
It is however possible to disarm this
function and switch off the lights by:
manually switching off the lights using the lights stalk,
switching off the engine.
YOUR 406 IN DETAIL 123
If the brightness sensor does not
function correctly, the system acti
vates the function (the lights come
on).The driver is alerted by the flash
ing of the ''dipped beam'' warning
light on the instrument panel.
Contact a PEUGEOT dealer to have
the system checked.
Follow me Home
When there is a low level of bright
ness or at night, if you leave your
vehicle, the side lights and the
dipped beam lights may remain on
for approximately one minute.
To do this: place the lights stalk in the AUTO
position,
 place the key in the accessories
position (first notch),
 press the end of the lights stalk for
more than two seconds,
 place the lights stalk in the 0posi
tion,
 flash the headlamps,
 get out of the car and lock it.

29-07-2002
Rear screen wiper
(estate)
Turn ring Ato the first notch,
for intermittent wiping.
Rear screen wash (estate)
Turn ring Abeyond the first
notch; the windscreen wash
then the windscreen wiper
operate for a fixed period.
WINDSCREEN WIPER STALK
Front windscreen wipers
2 Rapid wipe (heavy rain)
1 Normal wipe (moderate rain).
AUTO Automatic wipe
0 Off.
Single wipe (press downwards).
Operation
In position 1or 2, when the vehicle
stops, the windscreen wiper changes
to a lower wiping speed, then
resumes its initial speed when the
vehicle starts again.
When the ignition has been
switched off for more than a
minute with the stalk in the AUTO
position, it is necesary to reacti
vate this function. To do this, move
the stalk to any position, then move it
back to the AUTOposition. Automatic windscreen wiper
In the
AUTO position, the wipers
operate automatically and adjust
their speed to the intensity of the
rainfall.
Operating check
Switching on
Activation of the function is accom
panied by the message 'Automatic
windscreen wiper actuated' on the
multifunction display.
In the event of malfunction in the
AUTO position, the windscreen
wiper will operate in downgrade
mode.
Contact a PEUGEOT dealer to have
the system checked.
YOUR 406 IN DETAIL
124
Do not mask the rain
detector located on the
windscreen behind the
interior mirror.
If you take the vehicle to an auto
matic car wash, switch off the igni
tion or check that the windscreen
wiper stalk is not in the automatic
position.
In Winter, it is advisable to wait for
the windscreen to completely
clear of ice before switching on
the automatic wipe. Windscreen and headlamp wash
Pull the windscreen wiper stalk
towards you.The windscreen wash
then the windscreen wipers operate
for a fixed period.
The windscreen wash and headlamp
wash operate simultaneously for a
few seconds,
only if the dipped
beam or main beam headlamps
are on.

29-07-2002
PETROL / LPG DUALFUEL VERSION167
Puncture
Insulated storage compartment
This is located in the boot and con
tains:
the temporary tyre repair cans 1
(your 406 LPG does not have a
spare wheel),
the adaptors 2 necessary for
filling the LPG tank in some
countries,
the towing eye 3.
Fuses
The LPG functions are protected
by the two fuses Ain the fuse box
located in the engine compartment.
Using the repair cans
(Refer to the directions on the cans
also)
if possible, remove the object
which caused the puncture,
rotate the wheel so that the valve is in the same position as the
figures 2 or 10 on a clock,
shake the cans vigorously before use. In very cold weather, warm
the cans between your hands for
few minutes,
hold the valve with one hand and with the other press the injection
nozzle on the can firmly onto the
valve, holding it straight,
maintain the pressure firmly for one minute, carry out the same operation with
the second can, then drive imme
diately, at a moderate speed , to
the nearest garage.
The cans enable you to carry out
a temporary repair.
After use, the tyre must be
changed.
As the cans are pressurized, they
must not be exposed to a temper
ature above 50°C.
Store them away from heat in the
insulated storage compartment.

29-07-2002
PETROL / LPG DUALFUEL VERSION167
Puncture
Insulated storage compartment
This is located in the boot and con
tains:
the temporary tyre repair cans 1
(your 406 LPG does not have a
spare wheel),
the adaptors 2 necessary for
filling the LPG tank in some
countries,
the towing eye 3.
Fuses
The LPG functions are protected
by the two fuses Ain the fuse box
located in the engine compartment.
Using the repair cans
(Refer to the directions on the cans
also)
if possible, remove the object
which caused the puncture,
rotate the wheel so that the valve is in the same position as the
figures 2 or 10 on a clock,
shake the cans vigorously before use. In very cold weather, warm
the cans between your hands for
few minutes,
hold the valve with one hand and with the other press the injection
nozzle on the can firmly onto the
valve, holding it straight,
maintain the pressure firmly for one minute, carry out the same operation with
the second can, then drive imme
diately, at a moderate speed , to
the nearest garage.
The cans enable you to carry out
a temporary repair.
After use, the tyre must be
changed.
As the cans are pressurized, they
must not be exposed to a temper
ature above 50°C.
Store them away from heat in the
insulated storage compartment.

29072002
BATTERY
To charge the battery using a battery charger:
Disconnect the battery,
Follow the instructions for use given by the battery charger manufacturer,
Reconnect starting with the negative (–) terminal,
Check that the terminals and connectors are clean. If they are covered with sul
phate (white or greenish deposit), disconnect them and clean t hem.
To start the vehicle from another battery:
Connect the red cable to the positive (+) terminals of the tw o batteries,
Connect one end of the green or black cable to the negat ive (–) terminal of the
slave battery,
Connect the other end of the green or black cable to an e arth point on the bro
ken down vehicle, as far as possible from the battery,
Operate the starter, let the engine run.
Wait for the engine to return to idle, then disconnect th e cables.
Never disconnect a terminal when the engine is running.
Never charge a battery without first disconnecting the terminal s.
Close the sunroof before disconnecting the battery. If it does not
operate normally following reconnection of the battery, you must
reinitialise it by turning the control to the maximum tilt po sition and pressing
it for a few seconds.
After every reconnection of the battery, switch on the igniti on and wait
1 minute before starting to allow the electronic systems to be initialised. If
slight difficulties are experienced after this, please contact a PEUGEOT
dealer. It is advisable to disconnect the battery if the vehicle
is not to be used for a period of more than one month.Economy mode
With the engine switched off and the
ignition key in the "running" or
"accessories" position for about half
an hour, certain electrical equipment
(displays, instrument panel, warning
lights, courtesy lights, electric win
dows, wipers etc.) will switch off
automatically to avoid draining the
battery.
Once the electrical equipment goes
into economy mode, it is necessary
to start the engine to enable the
equipment to work again.
MAINTENANCE OF YOUR 406
46