2002.5 Peugeot 406 reset

29-07-2002
Resetting the service indicator
Your PEUGEOT dealer carries out
this operation after each service.
However, if you carry out the service
yourself, the reset procedure is as
follows: – Switch off the ignition.
– Press and hold button 1.
– Switch on the ignition.
The display begins a 10 second
countdown. – Keep button 1pressed for
10 seconds.
The display shows [= 0] and the ser
vice symbol disappears.
YOUR 406 IN DETAIL
134

29-07-2002
INSTRUMENT PANEL DIALS: PETROL / DIESEL1 Fuel filler cap warning light.
2 Door open warning light.
3 Dipped beam headlamps
indicator light.
4 Main beam headlamps indicator
light.
5 Rev counter.
6 Lefthand direction indicator.
7 Central (STOP) warning light.
8 Service indicator, oil level and
total distance recorder. 9
Righthand direction indicator.
10 Speedometer.
11 Clogging of the particulate
emission filter warning light
(Diesel).
12 Front fog lamps indicator light.
13 Rear fog lamp indicator light.
14 Dynamic stability control
(ASR/ESP) indicator light
(petrol versions only).
15 Low coolant level warning light.
YOUR 406 IN DETAIL 125
16 Coolant temperature indicator.
17 Trip recorder zero reset.
18 Handbrake and low brake fluid
level warning light.
19 Seat belt not fastened warning
light.
20 Air bags warning light.
21 ABS system warning light.
22 Engine diagnostics warning
light.
23 Battery charge warning light.
24 Diesel engine preheating
indicator light.
25 Passenger air bag disarming
warning light.
26 Water in diesel filter warning
light.
27 Front brake pad wear warning
light.
28 Engine oil pressure warning
light.
29 Electronic immobiliser warning
light.
30 Lighting rheostat.
31 Fuel gauge.
32 Low fuel level warning light.

29-07-2002
1 Fuel filler cap
warning light.
2 Door open warning light.
3 Dipped beam headlamps
indicator light.
4 Main beam headlamps
indicator light.
5 Rev. counter.
6 Lefthand direction indicator.
7 Central (STOP)
warning light.
8 Low fuel level warning
light.
9 Fuel gauge. 10
Service indicator, oil level
indicator and total distance
recorder.
11 Righthand direction indicator.
12 Speedometer.
13 Clogging of the particulate
emission filter warning light
(Diesel).
14 Front fog lamps indicator light.
15 Rear fog lamp indicator light.
16 Dynamic stability control
(ASR/ESP) warning light (petrol
versions only). 17
Low coolant level warning light.
18 Coolant temperature indicator.
19 Trip recorder zero reset button.
20 Handbrake and low brake fluid
level warning light.
21 Seat belt not fastened warning
light.
22 Air bags warning light.
23 ABS system warning light.
24 Engine diagnostics warning
light.
25 Battery charge warning light.
26 Diesel engine preheating
indicator light.
27 Passenger air bag disarming
warning light.
28 Water in diesel filter warning
light.
29 Front brake pad wear warning
light.
30 Engine oil pressure warning
light.
31 Electronic immobiliser warning
light.
32 Lighting rheostat.
33 Engine oil temperature
indicator.
YOUR 406 IN DETAIL
126
INSTRUMENT PANEL DIALS: PETROL / DIESEL

29-07-2002
YOUR 406 IN DETAIL127
1
Fuel filler cap warning light.
2 Door open warning light.
3 Dipped beam headlamps
indicator light.
4 Main beam headlamps indicator
light.
5 Rev. counter.
6 Lefthand direction indicator.
7 Central (STOP) warning light.
8 Low fuel level warning light.
9 Fuel gauge. 10
Service indicator, oil level
and total distance recorder.
11 Righthand direction indicator.
12 Speedometer.
13 Clogging of the particulate
emission filter warning light
(Diesel).
14 Front fog lamp indicator light.
15 Rear fog lamp indicator light.
16 Dynamic stability control
(ASR/ESP) indicator light
(petrol versions only). 17
Low coolant level warning light.
18 Coolant temperature indicator.
19 Trip recorder zero reset.
20 Handbrake and low brake fluid
level warning light.
21 Seat belt not fastened warning
light.
22 Air bags warning light.
23 ABS system warning light.
24 Engine diagnostics warning
light.
25 Battery charge warning light.
26 Diesel engine preheating
indicator light.
27 Passenger air bag disarming
warning light.
28 Water in diesel filter warning
light.
29 Front brake pad wear warning
light.
30 Engine oil pressure warning
light.
31 Operating programmes.
32 Gear lever position indicator.
33 Electronic immobiliser warning
light.
34 Lighting rheostat.
35 Engine oil temperature.
INSTRUMENT PANEL DIALS: AUTOMATIC GEARBOX

29-07-2002
Lighting
rheostat
With the lights on, press the button to
vary the intensity of the lighting of the
instruments and controls. When the
lighting reaches the minimum (or
maximum) setting, release the but
ton then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the
required brightness, release the
button.
Trip recorder
zero reset
With the ignition on, press the button. Instrument panel display
After switching on the ignition, three functions are shown i
n succession:
engine oil level indicator,
service indicator,
total distance recorder.
Engine oil level
When the ignition is switched on, the engine oil level indicator is displayed
for approximately five seconds, then the service indicator is displa yed for
five seconds.
Maximum
Use the dipstick to confirm the level on the indicator; a surpl us of
oil can cause damage to the engine.
Contact a PEUGEOT dealer as soon as possible.
Minimum
Check the level with the dipstick and top it up. The indi cation is
only correct if the vehicle has been on stable, level ground, with
the engine stopped, for 10 minutes.
No oil
It is essential to top up the oil to the correct level, oth erwise there
is a risk engine will be damaged.
YOUR 406 IN DETAIL
132

29-07-2002
TRIP COMPUTERDisplay B Display C
– the range,
– the distance travelled,
– the average consumption,
– the current consumption,
– the average speed.
Zero reset
Press the stalk for more than two seconds. Pressing the button on the end of the wiper stalk enables t
he following data to be dis
played:
– the current consumption and the range,
– the average consumption, the distance travelled and theaverage speed calculated over a period "1",
– the average consumption, the distance travelled and the average speed calculated over a period "2".
Periods "1"and "2"are defined by the frequency of the zero
reset. They allow, for instance, daily calculations over period
"1" and monthly calculations over period "2".
Zero reset
When the required period is displayed, press the stalk for
more than two seconds.
YOUR 406 IN DETAIL 137

29-07-2002
Range
The display shows the distance that
can still be covered with the fuel
remaining in the tank.
Note:this figure may rise if there is a
change in driving style or road sur
face, causing a significant drop in
current fuel consumption.
If there are less than 3 litres of fuel in
the tank, only three segments will be
displayed. Average consumption
This is the ratio between the amount
of fuel consumed and the distance
travelled since the computer was last
reset to zero.
The display stops at 30 l/100km.
Current fuel consumption
This gives the fuel consumption
recorded during the last two sec
onds. This function is only displayed
when the vehicle is travelling at more
than 12 m.p.h. (20 km/h).
The display stops at 30 l/100km. Average speed
This is obtained by dividing the dis
tance travelled by the period of time
the vehicle has been in use (with the
ignition on), since the computer was
last reset to zero.Distance travelled
This shows the distance travelled
since the computer was last reset to
zero.
After the trip computer has been
reset to zero, the range data
becomes meaningful only after the
vehicle has been in use for a certain
period.
If horizontal segments are displayed
instead of figures when driving, con
tact a PEUGEOT dealer.
YOUR 406 IN DETAIL
138