2002.5 Peugeot 206 CC Owner's Manual

After confirming the address, select a service by scrolling through the list using the direction arrows then press the
"VAL"button.
A cursor on the left-hand side of the screen indicates yourposition in the list.
Selecting a service The last address entered is displayed. There are 3 options for defining the location in which you wish to obtain a service:
Ð resume the last address entered by means of the "Validate"
function.
Ð enter the name of a new town then enter the street (or the "Town centre" function) by means of the "Change"function.
Ð automatically enter your current location by using the "Current location" function.
YOUR 206 CC IN DETAIL
50
The address of the required service is displayed. An indication on the right-hand side of the screen (e.g. 1/50) indicates whether there are any other establishments
(50 maximum) offering the same service within a radius ofapproximately 50 km. Use the
"Next"or "Previous" functions to consult the list
offered.When the establishment of your choice is displayed, select the "Validate" function then press the "VAL"button. Select
a guidance criterion. Guidance begins, follow the instructions.
07-10-2002

Selecting a stored destination Using the direction arrows, select the directory in which the address you are looking for is stored then press the "VAL"
button. The stored addresses are displayed.
A cursor on the left-hand side of the screen indicates your position in the list. Select a description by scrolling through thelist using the direction arrows, then press the "VAL"button.
The complete address is displayed. Select the "Validate"
function then press the "VAL" button. Select a guidance crite-
rion. Guidance begins, follow the instructions.Storing an address in a directory When a new address is entered, you can store it by selecting the "Store" function.
Enter the description of the address. If the description
already exists for a different address, you can replace the oldaddress with a new one.
Select the Personal or Professional directory, then press the
"VAL" button. The address is then stored in the directory of
your choice.
YOUR 206 CC IN DETAIL 51
07-10-2002

Navigation options From the main menu, the "Navigation options"menu gives
access to the following parameters:
Ð Management of the directories. It enables an address stored under a description to be renamed or deleted. To do this, select the directory and the description to bechanged.
Ð Voice synthesis volume adjustment.
Ð Deletion of all data stored in the two directories.Display configuration From the general menu, the "Configure display"menu gives
access to the following parameters:
Ð Adjustment of the display brightness.
Ð Adjustment of the date and time.
Ð Selection of the language of the display and voice infor- mation (English, German, Spanish, French, Italian).
Ð Adjustment of formats and units. This enables you to choose between Km/h or Mph and degrees Celsius or Fahrenheit and to modify the format for the hours (12 or 24hour mode).
YOUR 206 CC IN DETAIL
52
07-10-2002

Guidance tools Access to the "Guidance tools" menu is by pressing the
"VAL" button during guidance.
It enables:
Ð the current guidance criterion to be changed,
Ð the programmed destination to be displayed or changed,
Ð the voice synthesis volume to be adjusted,
Ð the current guidance to be stopped.
YOUR 206 CC IN DETAIL 53
07-10-2002

YOUR 206 CC IN DETAIL
54
07-10-2002

YOUR 206 CC IN DETAIL55
VENTILATION 1 . Windscreen de-icing or demisting vents.
2 . Front window de-icing or demisting vents.
3 . Side vents.
4 . Centre vents.
5 . Air outlet to front footwells.
6 . Air outlet to rear footwells.
Advice on operation
Ð Place the air flow control at a level sufficient to ensure correct renewal of air in the passenger compartment. The ' 'OFF''posi-
tion cuts off all the air circulation in the passenger compartment.
Note: only use the ''OFF''position occasionally (risk of condensation).
Ð Select the air distribution most suited to your requirements and the climatic conditions.
Ð Gradually adjust the temperature setting for your comfort.
Ð Position the outside air control to the left; the "Outside Air" position.
Ð For perfectly even air distribution, take care not to obstruct the exterior air intake grille on the bonnet, the vents and the air ducts under the front seats. Check that the pollen filter is in good condition.
07-10-2002

YOUR 206 CC IN DETAIL
56
HEATING/VENTILATION
2. Air distribution adjustmentWindscreen and side win- dows (demisting/de-icing).
To quickly de-ice or demist the wind-screen and the side windows: Ð place the outside air intake control
to the left, in "Outside Air" position,
Ð set the heating and air flow controls to maximum,
Ð close the centre vents.
1. Temperature adjustment
To be adjusted according to your requirements. From blue (outside airtemperature) to red (hot).
07-10-2002

YOUR 206 CC IN DETAIL57
Windscreen ,side windows
and footwells. Footwells.
These settings are recommended for cold climates. Centre and side vents.
This setting is recommended for hotclimates.
3. Air flow adjustment Turn the control from position 1to position 4to give a suffi-
cient air flow for comfort. 4. Air intake control
Outside air intake.
This is the position for normal use.
Recirculation of interior air.
This position prevents the entry ofunpleasant odours and fumes from theoutside and increases the speed ofheating.
As soon as possible, place the controlin the outside air position, otherwisethere is a risk of the windows mistingup.
5. De-icing the rear screen and the mirrors
With the engine running, pressing the button de-ices therear screen and the mirrors.
It switches off automatically afterapproximately twelve minutes. Pressing the button again starts it again for twelve minutes.
It is possible to stop the de-icing opera-tion by pressing the button before thetwelve minutes have elapsed.
Note: this function is disarmed when
the roof is stored in the boot.
07-10-2002