Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600TOC-
EL
EBU00015
CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ........................ 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION .................................... 3-1
Identification number records ........... 3-3
Key identification number ................. 3-5
Vehicle identification number ........... 3-5
Model label ......................................... 3-7
CONTROL FUNCTIONS ......................... 4-1
Main switch......................................... 4-1
Indicator lights .................................... 4-3
Coolant temperature indicator light
checking method .............................. 4-7
Speedometer .................................... 4-11
Fuel gauge ........................................ 4-13
Handlebar switches .......................... 4-15
Throttle lever .................................... 4-21
Speed limiter .................................... 4-23
Front brake lever .............................. 4-25Rear brake pedal and lever.............. 4-27
Drive select lever .............................. 4-29
Recoil starter..................................... 4-29
Fuel tank cap..................................... 4-31
Fuel cock ........................................... 4-33
Starter (choke) “ ” ........................ 4-35
Seat ................................................... 4-37
Storage box ...................................... 4-39
Front carrier ...................................... 4-39
Rear carrier ....................................... 4-39
Front shock absorber
adjustment...................................... 4-41
Rear shock absorber
adjustment...................................... 4-45
Auxiliary DC jack .............................. 4-49
PRE-OPERATION CHECKS .................... 5-1
Front and rear brakes......................... 5-7
Fuel .................................................... 5-11
Engine oil .......................................... 5-15
Final gear oil ..................................... 5-19
Differential gear oil .......................... 5-21
Throttle lever .................................... 5-21
Fittings and Fasteners...................... 5-21
1234
5
8-31
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
EBU00697
Engine oil
Oil level inspection
1. Place the machine on a level place and
warm up the engine for several minutes.
2. Stop the engine.
3. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.NOTE:Wait a few minutes until the oil level settles be-fore checking.
4. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, fill the engine with sufficient oil to
reach the specified level.
1. Engine oil dipstick
1. Jauge d’huile
1. Varilla de medición del aceite de motor1. Maximum level mark 2. Minimum level mark
1. Repère de niveau maximum 2. Repère de niveau minimum
1. Marca de nivel máximo 2. Marca de nivel mínimo
