6-33
1
2
3
4
56
7
8
9
PERIODIC MAINTENANCE AND MINOR REPAIR
EC000103
cCDo not use a fuse of a higher
amperage rating than recommend-
ed to avoid causing extensive
damage to the electrical system
and possibly a fire.3.Turn the key to ÒONÓ and turn on
the electrical circuit in question to
check if the device operates.
4.If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAU03188
Replacing the headlight bulbThis motorcycle is equipped with a
quartz bulb headlight. If the headlight
bulb burns out, replace it as follows.
1.Remove the headlight unit by
removing the screws.1.Headlight unit
2.Screw (´2)
1
2
2.Remove the blown fuse, and
then install a new fuse of the
specified amperage.1.Main fuse
2.Spare fuse
3.Headlight fuse
4.Ignition fuse
5.Signaling system fuse
6.Carburetor heater fuse
7.Spare fuse (´2)
7
3
56
4
2
1Specified fuses:
Main fuse:30 A
Ignition fuse:10 A
Signaling system fuse:10 A
Headlight fuse:15 A
Carburetor heater fuse:10 A
5JX-9-E1 9/27/00 10:45 AM Page 62
8
SPECIFICATIONS
8-4
Battery
TypeGT6B-3
Voltage, capacity12 V, 6 Ah
Headlight typeHalogen bulb
Bulb voltage, wattage ´quantity
Headlight12 V, 60/55 W ´1
Tail/brake light12 V, 5/21 W ´1
Front flasher light12 V, 21 W ´2
Rear flasher light12 V, 21 W ´2
Auxiliary light12 V, 4 W ´1
Meter lighting12 V, 1.7 W ´1
Neutral indicator light12 V, 1.7 W ´1
High beam indicator light12 V, 1.7 W ´1
Turn indicator light12 V, 1.7 W ´1
Engine indicator light12 V, 1.7 W ´1
Fuses
Main fuse30 A
Headlight fuse15 A
Signaling system fuse10 A
Ignition fuse10 A
Carburetor heater fuse10 A
5JX-9-E1 9/27/00 10:45 AM Page 80
