4-33
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-4.frame
EL
c. The length of the spring (installed) chang-
es 1 mm per turn of the adjusting ring.CAUTION:Never attempt to turn the adjusting ring be-yond the maximum or minimum settings.
d. Tighten the locknut to the specified
torque. Measurement “A”:
Installed length:
Standard:
228.5 mm
Minimum (Hard):
220.5 mm
Maximum (Soft):
235.5 mm
Tightening torque:
55 Nm (5.5 m·kg)
A. Spring length
A. Longueur du ressort
A. Longitud del muelle
8-53
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-8.frame
EL
a. Cable length (46 ~ 50 mm)
a. Longueur de câble (46 à 50 mm)
a. Longitud del cable (46 ~ 50 mm)
4. Turn the adjusting bolt on the lever holder
so that cable length a is 46 ~ 50 mm.
5. Tighten the locknut on the lever holder.
WARNING
Operating with improperly adjusted brakes
could cause the brakes to malfunction result-
ing in reduced braking performance. This
could increase the chance of a collision or acci-
dent. After adjusting the parking brake, block
the rear of the machine off the ground and
spin the rear wheels. Check to make sure there
is no brake drag. If brake drag is noticed, per-form the adjustment again.
10-1
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-SPEC-E.frame
EL
EBU00428
SPECIFICATIONS
MODEL YFM350X
Dimension:
Overall length
Overall width
Overall height
Seat height
Wheel base
Minimum ground clearance
Minimum turning radius1,840 mm
1,080 mm
1,080 mm
765 mm
1,200 mm
125 mm
3,500 mm
Basic weight:
With oil and full fuel tank 191 kg
Engine:
Type
Cylinder arrangement
Displacement
Bore
´
Stroke
Compression ratio
Starting system
Lubrication systemAir-cooled, 4-stroke, SOHC
Single cylinder, Forward inclined
348 cm
3
83.0
´
64.5 mm
9.2 : 1
Electric starter
Wet sump
