2001 TOYOTA PRIUS battery

F12823
ECU±IG Fuse
Instrument Panel J/B
DI±482
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
2001 PRIUS (RM778U)
INSPECTION PROCEDURE
1 Check ECU±IG fuse.
PREPARATION:
Remove the ECU±IG fuse from the instrument panel J/B.
CHECK:
Check the continuity of the ECU±IG.
OK:
Continuity
NG Check for short circuit in all harness and com-
ponents connected to ECU±IG fuse (See at-
tached wiring diagram).
OK
2 Check that the battery positive voltage when IG switch is OFF.
OK:
Voltage: 9 ± 14 V
NG Charge or replace the battery.
OK

F12839
PIG
RLY E5
E61
2 B
GR IM1
IA21
7 B
GR 3
3 3
31 35
2 EMPS Relay
R±G B±R
Instrument Panel J/B
ECU±B
6
2G 2H1
W
F111
F101
WFL Block No. 1
DC/DC
F131
Engine Room R/B No. 3
3
321EMPS
FL Block No. 2 F18
MAIN
1
E52
PGND W±B
A J17
J/C
IG BatteryEngine Room R/B No. 3 DI±484
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
2001 PRIUS (RM778U)
DTC C1552/52 PIG Power Source Circuit
CIRCUIT DESCRIPTION
When turning ignition switch ON, battery voltage is supplied to terminal PIG of EMPS ECU by EMPS relay
operation.
DTC No.DTC Detecting ConditionTrouble Area
C1552/52The abnormal motor power source voltage value which is not
within the specification is input to EMPS ECU.
EMPS ECU

Power source circuit
WIRING DIAGRAM
DI7R8±01

F12862
Engine Room
R/B No. 3
EMPS
Fuse
DI±486
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
2001 PRIUS (RM778U)
3 Check EMPS fuse.
PREPARATION:
5/18/01Remove the EMPS fuse from engine room R/B No. 3.
CHECK:
5/18/01Check continuity of EMPS fuse.
OK:
Continuity
NG Check for short circuit in harness and all com-
ponents connected to EMPS fuse (See attached
wiring diagram).
OK
Check for open and short circuit in harness and connector between EMPS ECU and battery
(See page IN±41).

F12839
PIG
RLY E5
E61
2 B
GR IM1
IM21
7 B
GR 3
3 3
31 35
2 EMPS Relay
R±G B±R
Instrument Panel J/B
ECU±B
6
2G
2H1
W
F111
F101
WFL Block No. 1
DC/DC
F131
Engine Room R/B No. 3
3
321EMPS
FL Block No. 2 F18
MAIN
1
E52
PGND W±B
A J17
J/C
IG BatteryEngine Room R/B No. 3 DI±488
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
2001 PRIUS (RM778U)
DTC C1554/54 EMPS Relay Circuit
CIRCUIT DESCRIPTION
DTC No.DTC Detecting ConditionTrouble Area
C1554/54Open or short circuit is detected.

EMPS ECU

EMPS relay

EMPS relay circuit
WIRING DIAGRAM
DI7RA±01

F12828
ON
RLY
PGND
F11788
5
13
2
Open
Continuity
5
2 1
3
5
2 1
3 Continuity
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
DI±489
2001 PRIUS (RM778U)
INSPECTION PROCEDURE
1 Check voltage between terminals RLY and PGND of EMPS ECU connector.
PREPARATION:
Remove the EMPS ECU with connectors still connected.
CHECK:
Turn the ignition switch ON and measure the voltage between
terminals RLY and PGND of EMPS ECU connector.
OK:
Voltage: 9 ± 14 V
OK Check or replace EMPS ECU.
NG
2 Check EMPS relay.
PREPARATION:
Remove the EMPS relay from the engine room R/B No. 3.
CHECK:
Check the continuity between each terminal of the EMPS relay.
OK:
Terminals 1 and 2Continuity (Reference value 80 W)
Terminals 3 and 5Open
CHECK:
(a) Apply battery positive voltage between terminals 1 and 2.
(b) Check the continuity between the terminals.
OK:
Terminals 3 and 5Continuity

F12863
Instrument
Panel J/BECU±B
Fuse
DI±490
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
2001 PRIUS (RM778U)
NG Replace EMPS relay.
OK
3 Check ECU±B fuse.
PREPARATION:
Remove the ECU±B fuse from instrument panel J/B.
CHECK:
Check the continuity of ECU±B fuse.
OK:
Continuity
NG Check for short in harness and all components
connected to ECU±B fuse (See attached wiring
diagram).
OK
Check for open and short circuit in harness and connector between EMPS ECU and battery
(See page IN±41).

F12840
EMPS ECU
WL
E67
Y 3
IP1 L 11 Multiinformation Display
22
L
Instrument Panel J/B
IG1 Relay
3
51
2H GAUGE
2A5
W
FL Block No. 1
1
F11 F131
B±G
1 MAIN FL Block No. 2 F18
BatteryDC/DC
± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
DI±491
2001 PRIUS (RM778U)
DTC C1556/56 P/S Warning Light Circuit
CIRCUIT DESCRIPTION
DTC No.DTC Detecting ConditionTrouble Area
C1556/56There is a malfunction in PS warning light circuit.
Multiinformation display

EMPS ECU
WIRING DIAGRAM
DI7RB±01

± DIAGNOSTICSELECTRIC MOTOR POWER STEERING
DI±495
2001 PRIUS (RM778U)
4 Check battery positive voltage.
PREPARATION:
Start the engine.
CHECK:
Check the battery positive voltage.
OK:
Voltage: 9 ± 14 V
NG Check and repair charging system.
OK
5 Check operation of PS warning light.
PREPARATION:
(a) Turn the ignition switch OFF.
(b) Disconnect the connector from the EMPS ECU.
(c) Turn the ignition switch ON.
CHECK:
Check the PS warning light goes OFF.
OK Check and replace EMPS ECU.
NG
Check for short circuit in harness and connector between multiinformation display and EMPS
ECU, multiinformation display and DLC3 (See page IN±41).