2001 TOYOTA PRIUS display

H15524
B±W
W5
2BB±O
GR
W±B ACC Relay 10A SRS ACC
5A AM1
FL Block No. 2 FL Block No. 1 15A AM2
Battery 100A
DC/DCB±G W±RA
J11
J/C W±G
W±R P±L1
2H
8
2C2
2E
4
2E
8
2K
2B 536
A18ACC
120A
1 1
F13 1
F12
1
F11 1B9 2
1J B1
2G2
2C ACC
2
67AM1
AM2 IG2MAIN
35
A18IG2 Airbag Sensor
Assembly Instrument Panel J/B
Ignition Switch
ID 12
3
Instrument Panel J/B Engine Room J/B DI±634
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
2001 PRIUS (RM778U)
DTC Normal Source Voltage Drop
CIRCUIT DESCRIPTION
The SRS is equipped with a voltage±increase circuit (DC±DC converter) in the airbag sensor assembly in
case the source voltage drops.
When the battery voltage drops, the voltage±increase circuit (DC±DC converter) functions to increase the
voltage of the SRS to normal voltage.
The diagnosis system malfunction display for this circuit is different from other circuits that is when the SRS
warning light remains lit up and the DTC is a normal code, source voltage drop is indicated.
Malfunction in this circuit is not recorded in the airbag sensor assembly, and the source voltage returns to
normal, the SRS warning light automatically goes off.
DTC No.Diagnosis
(Normal)Source voltage drop
WIRING DIAGRAM
DI6PY±07

H15525
Combination Meter
Instrument Panel J/B
10A ACC
ACC Relay
5A AM1
W±G L15
C10
16
C10
5
C11
GR±RGR±R
W±BB±Y 9
2A
2
2D
8
2A
1
2H
8
2C
3
2B53
128
2K4
2B 1
2E3
A18LA
1
F11C
J27
Fl Block No. 1
23P±LW 1
F13
1 B±GL
GR±R
BBC
J28AB
A
J11
J/C
Battery F18
FL
Block
No. 2DLC3
DC/DC100A
J/C
I15 Ignition S/W
120A
MAINAirbag Sensor
Assembly
B±Y6
ID J26
J/C
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±637
2001 PRIUS (RM778U)
SRS Warning Light Circuit Malfunction
CIRCUIT DESCRIPTION
The SRS warning light is located on the combination meter.
When the SRS is normal, the SRS warning light lights up for approx. 6 seconds after the ignition switch is
turned from the LOCK position to ON position, and then turns off automatically.
If there is a malfunction in the SRS, the SRS warning light lights up to inform the driver of the abnormality.
When terminals Tc and CG of the DLC3 are connected, the DTC is displayed by blinking the SRS warning
light.
WIRING DIAGRAM
DI7QT±01

H15526
J11
J/C AW±B 2KW±BJ24
J/C
W±BDLC3
P±BJ26
J/C
P±B
Tc
8 2D 8AA
413 CGTc
E
E19
A18
Instrument Panel J/BAirbag Sensor
Assembly
ID
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±641
2001 PRIUS (RM778U)
Tc Terminal Circuit
CIRCUIT DESCRIPTION
By connecting terminals Tc and CG of the DLC3 the airbag sensor assembly is set in the DTC output mode.
The DTCs are displayed by blinking the SRS warning light.
WIRING DIAGRAM
DI6Q0±06

AB0117AB0119H15218H15700
LOCK
ON
AB0119H10688H10654
ON
CG
Tc
(+) (±)
DI±642
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
2001 PRIUS (RM778U)
INSPECTION PROCEDURE
If the DTC is not displayed, do the following troubleshooting.
1 Does SRS warning light light up for approx. 6 seconds?
PREPARATION:
Check operation of the SRS warning light after ignition switch
is turned from LOCK position to ON position.
NO Check SRS warning light system (See page
DI±632).
YES
2 Check voltage between terminals Tc and CG of DLC3.
PREPARATION:
Turn the ignition switch to ON.
CHECK:
Measure the voltage between terminals Tc and CG of DLC3.
OK:
Voltage: 10 ± 14 V
OK Go to step 4.
NG

AB0119H01304H01305
LOCKAirbag Sensor Assembly
Tc
(+)
(±)
DI±644
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
2001 PRIUS (RM778U)
If the DTC is displayed without a DTC check procedure, perform the following
troubleshooting.
1 Check resistance between terminal Tc of airbag sensor assembly and body
ground.
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (±) terminal cable from the battery,
and wait at least for 90 seconds.
(c) Disconnect the airbag sensor assembly connector.
CHECK:
Check resistance between terminal Tc of the airbag sensor as-
sembly connector and body ground.
OK:
Resistance: 1 MW or Higher
NG Repair or replace harness or connector.
OK
Replace airbag sensor assembly.

Flashing pattern No.1
Flashing pattern No.2
0.6 sec. 0.6 sec.
0.3 sec. 0.3 sec. 1.2 sec. ON
OFF ON
OFF
0.3 sec.
DI±670
± DIAGNOSTICSCOMBINATION METER SYSTEM
2001 PRIUS (RM778U)
2. FUEL GAUGE DIAGNOSIS CHECK
(a) Fuel emergency display
HINT:
If FR voltage input to the fuel sender gauge is abnormal (4.8 V or more, or 0.06 V or less) due to any error,
an emergency will be displayed.
(b) Display:
Immediately after the ignition switch is ON, all of the segments flash.
Diagnosis displayTrouble ItemPlausible Cause
All segments flashing
(Flashing pattern No. 1)
Cycle: 1.2 sec
Duty: 50 %Multiple communication errorCommunication is cut off.
4. Body ECU faulty
5. Engine ECU faulty
6. Open or short in wire harness for communica-
tion
HINT:
Referring to the attached reference material 1 or
2, specify the main cause
All segments flashing
(Flashing pattern No. 2)
(300 msec. ON, 300 msec OFF) x 2 + 1.2
sec. OFFSender gauge related trouble1. Sender gauge faulty
2. Open or short in wire harness
Display segments and ºEº flashing.
(Flashing pattern No. 1)
Cycle: 1.2 sec
Duty: 50 %Temperature sensor (located in the tank) related
trouble1. Temperature sensor faulty
2. Open or short in wire harness
Display segments and ºEº flashing.
(Flashing pattern No. 2)
(300 msec. ON, 300 msec. OFF) x 2 + 1.2
sec. OFFIndication sensor (located in the meter ) trouble1. Combination meter faulty
Segment No. 1 flashing
(Flashing pattern No. 1)
Cycle: 1.2 sec
Duty: 50 %This does not mean any failure.
When a battery is connected, it continues flash-
ing until the volume is confirmed.This occurs when the battery is turned ON.
HINT:
Low fuel warning: Cycle: 0.6 sec.;
Duty: 50 %

DI7XS±01
DI±674
± DIAGNOSTICSCOMBINATION METER SYSTEM
2001 PRIUS (RM778U)
PROBLEM SYMPTOMS TABLE
TROUBLESHOOTING:
Flow chart No.SymptomSee page
1Check the communication between the combination meter and the multiplex com-
munication circuit.DI±671
2The whole meter does not functionDI±672
3The margin of error in speedometer is large. Or it remains as 0 mph.DI±673
4Fuel receiver gauge is inoperative or improper.DI±674
5Indicators or warning lights do not light up.DI±676
Fuel gauge:
SymptomSuspect AreaSee page
Displayed level is higher or lower than the actual level.1. Inclination sensor resetting
2. Body ECUBE±47
IN±41
General:
SymptomSuspect area
Meter display does not properly function.3. Combination meter ECU
Entirely black screen appears.1. Fuse
2. Wire harness and connector
3. Combination meter ECU
Turning the light control switch ON does not dim the light.1. Illumination switch
2. Wire harness and connector
3. Combination meter ECU
Brightness cannot be changed by the illumination switch operation.1. Illumination switch
2. Wire harness and connector
3. Combination meter ECU
Speedometer:
SymptomSuspect area
Improper display (Remained as 0 km/h)1. Accessory that utilizes vehicle speed signals
2. Brake ECU
3. Combination meter ECU
4. Wire harness and connector
Speedometer only does not light up.1. Combination meter ECU
Abnormal display (Incomplete numbers displayed)1. Combination meter ECU
DIsplayed value changes frequently or sharply.1. Accessory that utilizes vehicle speed signals
2. Brake ECU
3. Combination meter ECU
4. Wire harness and connector
Margin of error in speedometer is large.1. Accessory that utilizes vehicle speed signals
2. Brake ECU
3. Combination meter ECU
4. Wire harness and connector
ODO/TRIP Meter:
SymptomSuspect area
ODO/TRIP only does not light up.1. Combination meter ECU
Abnormal display (Incomplete number displayed)1. Combination meter ECU
Both meters do not integrate values. (When speedometer is normal)1. Combination meter ECU
Trip meter only does not integrate values.1. ODO/TRIP switch
2. Combination meter ECU

± DIAGNOSTICSCOMBINATION METER SYSTEM
DI±675
2001 PRIUS (RM778U) Trip meter cannot be reset.
1. ODO/TRIP switch
2. Combination meter ECU
Display cannot be shifted among ODO, TRIPA and TRIPB.1. ODO/TRIP switch
2. Combination meter ECU
Without resetting, the display returns to 0.0 km.1. ODO/TRIP switch
2. +B wire harness
3. Combination meter ECU
Error of accumulated distance is large.1. Accessory that utilizes vehicle speed signals.
2. GND wire harness
3. Brake ECU
4. Wire harness and connector
5. Combination meter ECU
Others:
SymptomSuspect area
Some indicators or warning lights are always ON.1. Meter circuit plate
2. Corresponding switch and ECU
3. Combination meter ECU
4. Multiplex communication circuit
Some indicators or warning lights do not light up.1. Bulb
2. Meter circuit plate
3. Corresponding switch and ECU
4. Combination meter ECU
5. Multiplex communication circuit
Buzzer does not stop.1. Combination meter ECU
2. Corresponding switch and ECU