2001 PRIUS (EWD414U)
E GLOSSARY OF TERMS AND SYMBOLS
BATTERY
Stores chemical energy and
converts it into electrical energy.
Provides DC current for the auto's
various electrical circuits.GROUND
The point at which wiring attaches to
the Body, thereby providing a return
path for an electrical circuit; without a
ground, current cannot flow.
CAPACITOR (Condenser)
A small holding unit for temporary
storage of electrical voltage.HEADLIGHTS
Current flow causes a headlight
filament to heat up and emit light. A
headlight may have either a single
(1) filament or a double (2) filament
1. SINGLE
FILAMENT
CIGARETTE LIGHTER
An electric resistance heating
element.2. DOUBLE
FILAMENT
CIRCUIT BREAKER
Basically a reusable fuse, a circuit
breaker will heat and open if too
much current flows through it.
Some units automatically reset when
cool, others must be manually reset.HORN
An electric device which sounds a
loud audible signal.
DIODE
A semiconductor which allows
current flow in only one direction.IGNITION COIL
Converts low±voltage DC current
into high±voltage ignition current for
firing the spark plugs.
DIODE, ZENERA diode which allows current flow in one
direction but blocks reverse flow only up
to a specific voltage. Above that potential,
it passes the excess voltage. This acts as
a simple voltage regulator.LIGHT
Current flow through a filament
causes the filament to heat up and
emit light.
PHOTODIODE
The photodiode is a semiconductor
which controls the current flow
according to the amount of light.LED (LIGHT EMITTING DIODE)
Upon current flow, these diodes emit
light without producing the heat of a
comparable light.
DISTRIBUTOR, IIA
Channels high±voltage current from
the ignition coil to the individual
spark plugs.METER, ANALOG
Current flow activates a magnetic
coil which causes a needle to move,
thereby providing a relative display
against a background calibration.
FUSEA thin metal strip which burns through
when too much current flows through it,
thereby stopping current flow and
protecting a circuit from damage.
FUSIBLE LINK
METER, DIGITAL
Current flow activates one or many
LED's, LCD's, or fluorescent
displays, which provide a relative or
digital display.
FUEL
FUSIBLE LINK
A heavy±gauge wire placed in high
amperage circuits which burns through on
overloads, thereby protecting the circuit.
The numbers indicate the crosssection
surface area of the wires.(for Medium Current Fuse)
(for High Current Fuse or
Fusible Link)MOTOR
A power unit which converts
electrical energy into mechanical
energy, especially rotary motion.
M
2001 PRIUS (EWD414U)
COMBINATION METER
MALFUNCTION
INDICATOR LAMP
ABS
SRS
TURN L
TURN R
HIGH BEAM OUTPUT CONTROLWAT ER TEMP.
(
HIGH) WAT ER TEMP.
(
LOW) CRUISE
A 17 A 18 A 19 B 5
A 16 A 10 B 4
L L L GR± R B±YL G±R
COMBINATION METERB C10 , C11A
FROM HEADLIGHTS (
*1)
FROM DAYTIME RUNNING
LIGHT RELAY (
*2) FROM TURN SI GNAL
FLASHER RELAY TO ENGINE
CONTROL MODULE
TO BRAKE ECU
TO AIRBAG SENSOR
ASSEMBLY
10A
ACC FROM POWER SOURCE SYSTEM (
SEE PAGE 50)
2D 2
GR± R
A B
B C
B B
JUNCTION
CONNECTOR J26
JUNCTION
CONNECTORB J27 , J28AGR ±R
GR± R* 1 : W/O DAYTIME RUNNING LIGHT
* 2 : W/ DAYTIME RUNNING LIGHT
NEW MODEL OUTLINE
MAIN EQUIPMENT
182MO23(For U.S.A.)
Glove box Accesory box Multi-box
Front door pocket
Seat back pocket
(Driver's and
passenger seat)
182MO24182MO09
182MO25
Small storage box
Cup holder
(for two caps use)11.839ft3 (by SAE suitcase method)
luggage space is secured.182MO26182MO27182MO28
18
Air Conditioning
An automatic air conditioning has been adopted
in consideration to ease of use.
A clean air filter which removes pollen and
dust is included as a standard fitting for puri-
fying the air inside the cab.
Two air conditioning modes, A/C for eco-
nomical air conditioning and MAX for espe-
cially strong air conditioning, are provided.
Wireless Door Lock Remote Control System
With the wireless door lock remote control system, all the doors can be locked and unlocked by signals emitted
by the transmitter.
Power Window System
A power window system which enables all windows to be raised or lowered with switches has been adopted.
An auto up/down function and jam protection function have been added to the driver's power window.
HV Immobiliser System
HV immobiliser system will not allow the HV system to be started by duplicate key is used. This system
will permit the HV system to be started only when the ID code of the transponder chip impregnated in the
key matches the ID code registered beforehand in the transponder key amplifier.
Theft Deterrent System
When an attempt is made to forcibly enter the vehicle or open the hood or trunk lid without a key, or when
the battery terminals are removed and reconnected, this system sounds the horn and flashes the headlights,
taillights and emergency flashers for about 1 minute to alert the owner. At the same time, it locks all the
doors.
Storage Space
Ample storage space with an emphasis on practicality provided throughout the Prius.
Instrument panel (passenger seat)Seat back pocketFront door pocket
Center console boxLuggage space
BODY ELECTRICAL ± LIGHTING
151LBE68151LBE67
Multi-Reflector Type HeadlightConventional Headlight Reflector
(Multiple Parabolic Shape)
Headlight Bulb
Headlight Bulb
Lens
Light DistributionReflector
(Rotating Parabolic Shape)
Headlight Bulb
Lens Cut
Lens
Light Distribution
182BE03
From
BatteryDimmer Relay
Headlight
Relay
Parking
Brake Switch
H-LP DIM
PKBDaytime
Running
Light Relay
DRL
From
BatteryEH
HILO HI
LO
No.4
Daytime
Running
Light Relay
144
LIGHTING
HEADLIGHTS
The prius has newly adopted the multi-reflector headlights. Conventional headlights accomplish the dispersion
and distribution of the light that is emitted by the bulbs through the lens cut pattern. However, with the multi-reflec-
tor type headlights, the light from the bulbs is dispersed and distributed through multiple parabolic shaped reflec-
tors. As a result, the lens cut pattern is no longer provided in the center of the lens, thus realizing a clear look.
Light Distribution Diagram
DAYTIME RUNNING LIGHT SYSTEM
The daytime running light system is adopted for Canada model as standard and U.S.A. model as optional
equipment. This system is designed to automatically activate the headlights (dimmed low beams) during the
daytime to keep the car highly visible to other vehicles.
This system is controlled by a semi-conductor relay circuit (daytime running light relay).
BODY ELECTRICAL ± LIGHTING145
ILLUMINATED ENTRY SYSTEM
When a door is unlocked through a key operation or transmitter operation, or if a door is opened or closed,
the illuminated entry system turns ON the dome light. If the ignition switch is turned to the ACC or ON
position or if all doors are locked during the 15 seconds in which this light are ON, they will immediately
turn OFF.
This system is controlled by the body ECU.
LIGHT AUTO TURN-OFF SYSTEM
When the ignition key is turned from ON or ACC to LOCK position and the driver's door is opened with
the taillights and headlights on, this system automatically turns them off.
This system is controlled by the body ECU.
BODY ELECTRICAL ± ACCESSORIES
182BE43
DKUL
DKL
LSWD
Power
Window
Master
Switch
Ignition Key SW
From
BatteryIG
LSWP
LSR
KSW
DCTY
PCTY
RCTY
LCTY
HCTY
LUG
Courtesy
Switches
PKL
PKUL
Door Lock Motors
RRP D
Body
ECU
From Battery
Headlight
RelayTaillight
RelayHorn
Relay
HRLY
TRLYTo
HeadlightTo
Taillight
To
Vehicles
Horn
HR
From Battery
Interior
Light
Interior
Light
Relay
Security
Horn
Wireless
Door Control
Receiver
MPX
INDECM
Security
Indicator
185
THEFT DETERRENT SYSTEM
1. General
The theft deterrent system uses the door lock control system components and some other parts. When
somebody attempts to forcibly enter the vehicle or open the engine hood or luggage compartment door
without a key, or when the battery terminals are removed and reconnected, the theft deterrent system
sounds the vehicle's horn, security horn and flashes the headlights, taillights, hazard lights and interior
light for about one minute to alert. At the same time, it locks all the doors.
The control of this system is effected by the body ECU.
Wiring Diagram
BODY ELECTRICAL ± ACCESSORIES187
Condition (2)
When the doors, engine hood, and luggage compartment door are all closed and locked, and 30 seconds
have elapsed.
Condition (3)
When one of the doors, engine hood, or luggage compartment door is changed from ªcloseº to ªopenº.
When one of the doors, engine hood, or luggage compartment door is changed from ªlockº to ªunlockº.
When the ignition key is inserted in the ignition key cylinder.
When a terminal is disconnected from the battery and re-connected.
Alert State: a state in which attempted theft can be detected
The system transfers to the alarm state if any one of the conditions (4) listed below is met, or to the non-alert
state if any one of the conditions (5) is met.
Condition (4)
Any door, engine hood, or luggage compartment door is opened.
The ignition key or the wireless door lock remote control system other than the transmitter is used for
unlocking.
The luggage compartment door is opened with something other than the ignition key.
The engine hood is opened.
A terminal is disconnected from the battery and re-connected.
The wiring harness is directly connected as if to turn the ignition switch ON.
Condition (5)
The ignition key is used to unlock the doors or the luggage compartment door.
The transmitter of the wireless door lock remote control system is used to unlock the doors.
The ignition key is inserted in the ignition key cylinder and turned until the ignition switch is ON.
Alarm State: a state in which attempted theft can be detected
When an attempted theft is detected, the system sounds the vehicle's horn and the security horn, flashes
the headlights, taillights, and hazard lights, and illuminates the interior light to alert the people in the area.
If any one of the doors is unlocked, and the ignition key is not inserted in the ignition key cylinder, the
system forcefully locks the doors once.
The system transfers to the alert state if the condition (6) described below is met, or, when the system is
in the alarm state, it transfers to the non-alert state if any one of the conditions (5) described above is met.
At this time, the taillights are illuminated for 2 seconds to inform the driver that an attempted theft has been
detected.
Condition (6)
After approximately 60 seconds of the alarm time have elapsed.
B04748
B04749
1. +Terminal
2. +Terminal3. ±Terminal
4. ±Terminal
B04750
± INTRODUCTIONFOR ALL OF VEHICLES
IN±13
13 Author: Date:
2001 PRIUS (RM778U)
2. PRECAUTIONS TO BE OBSERVED WHEN INSPECT-
ING OR SERVICING ENGINE COMPARTMENT
The PRIUS, automatically turns the engine ON and OFF when
the ignition switch is set to the ON position provided that the
READY light on the instrument panel is it.
Before inspecting or servicing the engine compartment, there-
fore, remove the ignition switch key.
3. ACTIONS TO BE TAKEN WHEN BATTERIES ARE DE-
PLETED
(a) Actions to be taken when the auxiliary battery is depleted
HINT:
The following phenomena indicate that the auxiliary battery is
depleted:
No display appears on the instrument panel when you
turn the ignition switch to the ON position.
The hybrid system does not start.
The headlights are dark.
The sound from the horn is weak.
NOTICE:
Never use a quick charger.
(1) Move the shift lever to the P position, and engage
the parking brake.
(2) Remove the ignition key plate from the ignition
switch.
(3) Using a booster cable, connect the 12 V battery of
the rescue vehicle and auxiliary battery of the
stalled vehicle, as shown in the illustration.
(4) Start the engine of the rescue vehicle and run the
engine at a speed slightly higher than the idling
speed for 5 minutes to charge the auxiliary battery
of the stalled vehicle.
(5) Turn the ignition switch of the stalled vehicle to the
START position to start the hybrid system.
If the hybrid system fails to start and the master and HV battery
warning lights come on, the HV battery may have been dis-
charged.
(6) Disconnect the booster cable in the reverse way of
the connection procedure.
NOTICE:
If the auxiliary battery needs to be replaced, replace it only
with a 12 V battery specially designed for the use of the
PRIUS.