2001 TOYOTA CAMRY CNG Owners Manual

’01CAMRY CNG (L/O0009)
1952001 CAMRY CNG_U (OM33542U)
—Headlights
Low beamHi beam
1. Open the hood. Turn the bulb base
counterclockwise to the front of the
vehicle as shown.2. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.3. Install a new bulb and connector
into the mounting hole.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your authorized Toyota
CNG dealer.

’01CAMRY CNG (L/O0009)
1962001 CAMRY CNG_U (OM33542U)
Use a flat−bladed screwdriver. Remove
and install the cover clips as shown in
the following illustrations.Removing the cover clips
Installing the cover clips
Use a flat−bladed screw driver. To protect
the surface, place several sheets of paper
over the surface.
—Parking, front side marker
and front turn signal lights

’01CAMRY CNG (L/O0009)
1972001 CAMRY CNG_U (OM33542U)
Use a Phillips−head screwdriver. Remove
and install the cover clips as shown in
the following illustrations.Removing the cover clips
Installing the cover clips
—Rear side maker, rear turn
signal and stop/tail lights

’01CAMRY CNG (L/O0009)
1982001 CAMRY CNG_U (OM33542U)
a: Rear side marker light
b: Rear turn signal light
c: Stop/tail light
—Stop/tail lights

’01CAMRY CNG (L/O0009)
1992001 CAMRY CNG_U (OM33542U)
—Back−up lights
Use a flat−bladed screwdriver.

’01CAMRY CNG (L/O0009)
2002001 CAMRY CNG_U (OM33542U)
Remove and install the cover clips as
shown in the following illustrations.Removing the cover clips
Installing the cover clips
—License plate lights

’01CAMRY CNG (L/O0009)
2012001 CAMRY CNG_U (OM33542U)
—High mounted stoplight

’01CAMRY CNG (L/O0009)
2022001 CAMRY CNG_U (OM33542U)