2001 TOYOTA AVALON wheel

SS-10
- SERVICE SPECIFICATIONSENGINE MECHANICAL
126 Author
: Date
:
2001 AVALON (RM808U) Engine coolant drain union x Cylinder block
3940029
Water seal plate x Cylinder block1818013
Oil filter union x Cylinder block3031022
Water inlet housing x Cylinder block88069 in.´lbf
Knock sensor x Cylinder block3940029
No.2 idler pulley bracket x Cylinder block2829021
A/C compressor housing bracket x Cylinder block2525018
Generator bracket x Cylinder block4344032
Drive plate x Crankshaft8385061
Transaxle x Engine6465047
No.1 oil pan x Transaxle37.238027
Drive plate x Torque convertor clutch4142030
Flywheel housing under cover x Transaxle7.88069 in.´lbf
Rear engine mounting insulator x Cylinder block6465047
Front engine mounting insulator x Cylinder block6465047
Engine moving control rod x RH engine mounting bracket6465047
Engine moving control rod x RH fender apron6465047
RH engine mounting stay x Water outlet3232023
RH engine mounting stay x Engine moving control rod3232023
RH engine mounting stay x No.2 RH engine mounting bracket3232023
Front engine mounting insulator x Front frame Silver color bolt
Green color bolt44
66450
67032
49
Engine mounting absorber x Front frame4849035
Engine mounting absorber x Transaxle4849035
Rear engine mounting insulator x Front frame6667048
LH engine mounting insulator x Transaxle6465047
PS pump x PS pump bracket4344031
A/C compressor x Housing bracket25.526019
A/C compressor x No.1 oil pan25.526019
Generator adjusting bar x Drive belt adjusting bar bracket1818513
Fuel inlet hose x Fuel filter2930021
Front exhaust pipe support bracket x No.1 oil pan20.621015
Front exhaust pipe x Exhaust manifold6263046
Front exhaust pipe x Center exhaust pipe5657041
Center exhaust pipe x Tailpipe5657041
Front exhaust pipe bracket x Sub frame3333024
Front exhaust pipe support bracket x Front exhaust pipe stay3333024

SS0EO-01
- SERVICE SPECIFICATIONSLUBRICATION
SS-17
133 Author
: Date
:
2001 AVALON (RM808U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Oil pressure switch x Cylinder block131309
No.2 oil pan x Drain plug4546033
Oil pump x Relief valve plug36.837537
Oil pump x Cylinder block 10 mm head
12 mm head8
19.580
20069 in.´lbf
14
Oil pan baffle plate x No.1 oil pan88069 in.´lbf
No.1 oil pan x Cylinder block19.520014
No.1 oil pan x Oil pump 10 mm head
12 mm head8
19.580
20069 in.´lbf
14
No.1 oil pan x Rear oil seal retainer88069 in.´lbf
No.1 oil pan x Transaxle37.238027
Oil strainer x Main bearing cap88069 in.´lbf
Oil strainer x Oil pump88069 in.´lbf
No.2 oil pan x No.1 oil pan88069 in.´lbf
Flywheel housing under cover x Transaxle7.88069 in.´lbf
A/C compressor housing bracket x Cylinder block2525018
PS pump x PS pump bracket43.144032
PS pump drive belt adjusting strut x PS pump43.144032
PS pump drive belt adjusting strut x Oil pump43.144032
Exhaust pipe bracket x No.1 oil pan2121015

SS061-54
SS-34
- SERVICE SPECIFICATIONSSUPPLEMENTAL RESTRAINT SYSTEM
150 Author
: Date
:
2001 AVALON (RM808U)
SUPPLEMENTAL RESTRAINT SYSTEM
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Steering wheel5051037
Steering wheel pad8.89078 in.´lbf
Front passenger airbag assembly x Center bracket2020515
Front passenger airbag assembly x Instrument panel reinforcement2020515
Seatback frame assembly x Seat adjuster assembly4344032
Seat cushion assembly x Seat adjuster assembly1919414
Front seat inner belt x Seat adjuster assembly4243031
Seat armrest assembly4141030
Front seat installation bolt3737527
Airbag sensor assembly2020515
Front airbag sensor2020515
Side airbag sensor assembly2020515
Front seat outer belt retractor Upper bolt
Lower bolt7.4
4175
42065 in.´lbf
30

SS04W-07
- SERVICE SPECIFICATIONSSUSPENSION AND AXLE
SS-27
143 Author
: Date
:
2001 AVALON (RM808U)
SUSPENSION AND AXLE
SERVICE DATA
Cold tire inflation
pressureP205/65R15 92H Front, rear
P205/60R16 91H Front, rear210 kPa (2.1 kgf/cm2, 31 psi)
220 kPa (2.2 kgf/cm2, 32 psi)
Vehicle heightFront*1
Rear*2213 mm (8.39 in.)
266 mm (10.47 in.)
Camber
Right-left error-0°37' ± 45' (-0.62° ± 0.75°)
45' (0.75°) or less
Front Wheel
Caster
Right-left error2°10' ± 45' (2.17° ± 0.75°)
45' (0.75°) or less
Front Wheel
alignmentSteering axis inclination
Right-left error13°04' ± 45' (13.07° ± 0.75°)
45' (0.75°) or less
Toe-in (total)
Rack end length difference0° ± 12' (0° ± 0.2°, 0 ± 2 mm, 0 ± 0.08 in.)
1.5 mm (0.059 in.) or less
Wheel angle Inside wheel
Outside wheel: Reference35°45' ± 1° (35.75° ± 1°)
31°23' (31.38°)
Rear wheel
Camber
Right-left error-0°43' ± 45' (-0.72° ± 0.75°)
45' (0.75°) or less
Rear wheel
alignmentToe-in (total)
No. 2 lower suspension arm length difference0°24' ± 12' (0.4° ± 0.2°, 4 ± 2 mm, 0.16 ± 0.08 in.)
1 mm (0.04 in.) or less
FtlAxle bearing backlash Maximum0.05 mm (0.0020 in.)Front axleAxle hub deviationMaximum0.05 mm (0.0020 in.)
Front drive shaftDrive shaft standard length LH
RH586.0 ± 2.0 mm (23.071 ± 0.079 in.)
881.6 ± 2.0 mm (34.709 ± 0.079 in.)
Ft iLower ball joint turning torque1.0 - 3.4 N´m (10 - 35 kgf´cm, 8.7 - 30 in.´lbf)Front suspensionStabilizer bar link ball joint turning torque0.05 - 1.0 N´m (0.5 - 10 kgf´cm, 0.4 - 8.7 in.´lbf)
RlAxle bearing backlash Maximum0.05 mm (0.0020 in.)Rear axleAxle hub deviationMaximum0.07 mm (0.0028 in.)
RiNo. 2 lower suspension arm length512.3 mm (20.169 in.)Rear suspensionStabilizer bar link ball joint turning torque0.05 - 1.0 N´m (0.5 - 10 kgf´cm, 0.4 - 8.7 in.´lbf)
*1: Front measuring point
Measure the distance from the ground to the center of the front side lower suspension arm mounting bolt.
*2: Rear measuring point
Measure the distance from the ground to the center of the front side strut rod mounting bolt.

SS0G9-03
SS-32
- SERVICE SPECIFICATIONSSTEERING
148 Author
: Date
:
2001 AVALON (RM808U)
STEERING
SERVICE DATA
DRIVE BELT
Drive belt tension* New belt120 - 185 lbf
Drive belt tension* Used belt95 - 135 lbf
POWER STEERING FLUID
Fluid level rise Maximum5 mm (0.20 in.)
Fluid pressure at idle speed with valve closed Minimum7,845 kPa (80 kgf/cm2, 1,138 psi)
STEERING WHEEL
Steering wheel freeplayMaximum30 mm (1.18 in.)
Steering effort at idle speedReference5.9 N´m (60 kgf´cm, 52 in.´lbf)
POWER STEERING VANE PUMP
Vane pump rotating torque0.3 N´m (2.8 kgf´cm, 2.4 in.´lbf) or less
Oil clearance between pump shaft and bushing STD0.03 - 0.05 mm (0.0012 - 0.0020 in.)
Oil clearance between pump shaft and bushingMaximum0.07 mm (0.0028 in.)
Vane plate heightMinimum8.6 mm (0.339 in.)
Vane plate thickness Minimum1.397 mm (0.0550 in.)
Vane plate lengthMinimum14.991 mm (0.5902 in.)
Clearance between the rotor groove and plateMaximum0.035 mm (0.0014 in.)
Vane plate length Pump rotor and cam ring mark
None14.999 - 15.001 mm (0.59051 - 0.59059 in.)
114.997 - 14.999 mm (0.59043 - 0.59051 in.)
214.995 - 14.997 mm (0.59035 - 0.59043 in.)
314.993 - 14.995 mm (0.59027 - 0.59035 in.)
414.991 - 14.993 mm (0.59020 - 0.59027 in.)
Spring free length Minimum32.3 mm (1.272 in.)
POWER STEERING GEAR
Steering rack runout Maximum0.03 mm (0.0012 in.)
Total preload (Control valve rotating torque)0.8 - 1.4 N´m (8 - 14 kgf´cm, 6.9 - 12.2 in.´lbf)
*: For use with belt tension gauge

SS0GA-06
- SERVICE SPECIFICATIONSSTEERING
SS-33
149 Author
: Date
:
2001 AVALON (RM808U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
TILT STEERING COLUMN
Tilt lever lock shaft9.09078 in.´lbf
Turn signal bracket x Steering column upper tube7.57565 in.´lbf
Shift lever housing x Column tube assembly101007
Shift lever set bolt1111 08
Shift lock solenoid bracket x Shift lever housing3.43530 in.´lbf
Shift lock switch guide2.82925 in.´lbf
Universal joint assembly x Main shaft assembly3536026
Steering column assembly set nut2526019
Intermediate shaft sub-assembly x Control valve shaft3536026
Universal joint assembly x Intermediate shaft sub-assembly3536026
Steering wheel set nut5051037
Steering wheel pad set screw (Torx screw)8.89078 in.´lbf
POWER STEERING VANE PUMP
Rear housing set bolt1717012
Pressure port union8385062
Suction port union set bolt131309
Front bracket x Rear bracket4344032
Vane pump pulley set nut4445033
Pressure feed tube x PS vane pump assembly5253038
Oil pressure switch2121015
PS vane pump set bolt A bolt29 (43)300 (440)22 (32)
PS vane pump set bolt B bolt4344032
Pressure feed tube x Pressure feed tube23 (25)230 (250)17 (18)
Clamp plate set nut7.88069 in.´lbf
POWER STEERING GEAR
Control valve housing set bolt1818013
Self-locking nut2525018
Rack housing cap5960043
Rack guide spring cap lock nut50 (69)510 (700)37 (51)
Rack x Rack end60 (83)610 (850)45 (61)
Tie rod end lock nut7475054
Turn pressure tube union nut12 (13)120 (130)9 (9)
PS gear assembly set bolt1811,850134
Stabilizer bar set bolt1919014
Pressure feed and return tubes x Control valve housing28 (25)290 (250)21 (18)
Pressure feed tube clamp plate set nut101007
Intermediate shaft sub-assembly x Control valve shaft3536026
Tie rod end x Steering knuckle4950036
( ): For use without SST

AB0158
Battery
SST
H11905
Tires
(5 or more)
R05403
R09690
Battery
SSTFront Passenger
Airbag Assembly
10 m (33 ft) or more
RS-36
- SUPPLEMENTAL RESTRAINT SYSTEMFRONT PASSENGER AIRBAG ASSEMBLY
1556 Author
: Date
:
2001 AVALON (RM808U)
(c) Check functioning of the SST (See step 1-(a) on page
RS-17).
SST 09082-00700
(d) Place the tires.
(1) Place at least 2 tires under the tire to which the front
passenger airbag assembly is tied.
(2) Place at least 2 tires over the tire to which the front
passenger airbag assembly is tied. The top tire
should have the wheel installed.
(3) Tie the tires together with 2 wire harness.
CAUTION:
Make sure that the wire harness is tight. It is very danger-
ous if loose wire harnesses result in the tires coming free
due to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Provide
at least 1 m (3 ft) of slack for the wire harness.
(e) Install the SST.
Connect the connectors of the 2 SST to the front passen-
ger airbag assembly connector.
SST 09082-00700, 09082-00760
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tires.
(f) Deploy the airbag.
(1) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(2) Check that no one is within 10 m (33 ft) area around
the tire which the front passenger airbag assembly
is tied to.
(3) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.

H01336
Tires
(5 or More)
R05403
H0133710 m (33 ft) or more SSTBattery
Side Airbag
Assembly
H00544
- SUPPLEMENTAL RESTRAINT SYSTEMSIDE AIRBAG ASSEMBLY (Power Adjuster Type)
RS-49
1569 Author
: Date
:
2001 AVALON (RM808U)
(e) Place the tires.
(1) Place at least 2 tires under the tire to which the side
airbag assembly is tied.
(2) Place at least 2 tires over the tire to which the side
airbag assembly is tied. The top tire should have the
wheel installed.
(3) Tie the tires together with 2 wire harness.
CAUTION:
Make sure that the wire harness are tight. It is very danger-
ous when loose wire harness results in the tires coming
free due to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Secure
at least 1 m (3 ft) of slack for the wire harness.
(f) Install the SST.
Connect the connectors of the 2 SST to the side airbag
assembly connector.
SST 09082-00700, 09082-00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
(g) Deploy the airbag.
(1) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(2) Check that no one is within 10 m (33 ft) area around
the tire which the side airbag assembly is tied to.
(3) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(h) Dispose of the side airbag assembly.
CAUTION:

The side airbag assembly is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.

Use gloves and safety glasses when handling a side
airbag assembly with the deployed airbag.

Do not apply water etc. to a side airbag assembly with
the deployed airbag.