2001 SUBARU OUTBACK battery

Maintenance and service11-45
–
CONTINUED –
HS0194
HS0193
Stopper
6. Install the wip er b lad e assemb ly to the wip er arm . Make sure that it
loc ks in p lac e.
7. Lower the wip er arm. Battery
WARNING
Before beginning work on or near any battery, be sure to extin-
guish all cigarettes, matches, and lighters. Never expose a bat- tery to an open flame or electric sparks. Batteries give off a gaswhich is highly flammable and explosive. For safety, in case an explosion does occur, wear eye protec-
tion or shield your eyes when working near any battery. Never
lean over a battery. Do not let battery fluid contact eyes, skin, fabrics, or paint be-
cause battery fluid is a corrosive acid. If battery fluid gets on yourskin or in your eyes, immediately flush the area with water thor-
oughly. Seek medical help immediately if acid has entered theeyes.If battery fluid is accidentally swallowed, immediately drink a
large amount of milk or water, and seek medical attention
immediately. To lessen the risk of sparks, remove rings, metal watchbands,

11-46and other metal jewelry. Never allow metal tools to contact the
positive battery terminal and anything connected to it WHILE youare at the same time in contact with any other metallic portion ofthe vehicle because a short circuit will result.
Keep everyone including children away from the battery.
Charge the battery in a well-ventilated area.
CAUTION
Never use more than 10 amperes when charging the battery be-
cause it will shorten battery life.
It is unnec essary to p eriod ic ally c hec k the b attery fluid level or p eriod i-
c ally refill with d istilled water. Fuses
CAUTION
Never replace a fuse with one having a higher rating or with mate-
rial other than a fuse because serious damage or a fire could re-sult.
HBB008DA HB8003CA
The fuses are d esig ned to melt d uring an overload t o p revent d amag e to
the wiring harness and elec tric al eq uip ment. The fu ses are loc ated in

Specifications12-3
–
CONTINUED –
Overall heig ht 62.2 in (1,580 mm)
Ground c learanc e
2.5 liter mod els 7.3 in (185 mm)
3.0 liter mod els 7.9 in (200 mm)
Front tread 57.9 in (1,470 mm)
Rear tread 57.7 in (1,465 mm)
Wheelb ase 104.3 in (2,650 mm)
Engine 2.5 liter
Eng ine mod el EJ251
Eng ine typ e Horizontally op p osed , liq uid c ooled
4 c ylind er, 4 stroke g asoline eng ine
Eng ine d isp lac ement 2,457 c c (149.9 c u in.)
Bore 3.92 in (99.5 mm)
Stroke 3.11 in (79.0 mm)
Comp ression ratio 10.0 : 1
Firing ord er 1 - 3 - 2 - 4 3.0 liter
Eng ine mod el EZ30D
Eng ine typ e Horizontally op p osed , liq uid c ooled 6 c ylind er, 4 stroke g asoline eng ine
Eng ine d isp lac ement 2,999 c c (183.0 c u in.)
Bore 3.51 in (89.2 mm)
Stroke 3.15 in (80.0 mm)
Comp ression ratio 10.7 : 1
Firing ord er 1 - 6 - 3 - 2 - 5 - 4
Electrical system 2.5 liter
Battery typ e and c ap ac ity
MT: 55D23L
AT: 75D23L
Alternator 12V-90A

12-4Sp ark p lug s typ e RC10YC4 (Champion)
RC8YC4 (Champ ion)
BKR6E-11 (NGK)
K20PR-U11 (NIPPONDENSO)
3.0 liter
Battery typ e and c ap ac ity 75D23L
Alternator 12V-100A
Sp ark p lug s typ e PLFR6A-11 (NGK)
Capacities
Fuel tank 16.9 US g al (64 liters, 14.1 Imp g al)
Eng ine oil 2.5 liter 4.2 US q t (4.0 liters, 3.5 Imp q t)
3.0 liter 6.0 US q t (5.7 liters, 5.0 Imp q t)
Transmission oil (MT) 3.7 US q t (3.5 liters, 3.1 Imp q t)
Transmission fluid (AT) 9.8 US q t (9.3 liters, 8.2 I mp q t)
AT d ifferential g ear oil 1.3 US q t (1.2 liters, 1.1 Imp q t)
Rear d ifferential g ear oil 0.8 US q t (0.8 liter, 0.7 Imp q t)
Power steering g ear fluid 0.7 US q t (0.7 liter, 0.6 Imp q t)
Eng ine c oolant 2.5 liter MT 7.2 US q t (6.8 liters, 6.0 Imp q t)
AT 7.1 US q t (6.7 liters, 5.9 Imp q t)
3.0 liter 8.1 US q t (7.7 liters, 6.7 Imp q t)
Tires Legacy
Typ e Steel b elted rad ial, Tub eless
Size Brig hton P195/60R15 87H L P205/60R15 90H
GT P205/55R16 89H
Temp orary sp are T135/70D16
Pressure Front Brig hton 33 p si (230 kPa, 2.3 kg /c m 2
)
GT, L 32 p si (220 kPa, 2.2 kg /c m 2
)
Rear Brig hton 32 p si (220 kPa, 2.2 kg /c m 2
)
GT, L 30 p si (210 kPa, 2.1 kg /c m 2
)
Temp orary sp are 60 p si (420 kPa, 4.2 kg /c m 2
)