Form No. 8P95-EA-00G
Protecting Your Mazda4-12
Q037-7IE
Winter Driving
• Carry emergency gear, including
tire chains, window scraper, flares,
a small shovel, jumper cables, and
a small bag of sand or salt.
• Have the proper ratio of antifreeze
in the radiator (page 8-22).
• Inspect the battery and its cables.
Cold reduces battery capacity.
• Use only cold-weather engine oil
(page 8-16).
• Inspect the ignition system for
damage and loose connections. •
Use washer fluid made with
antifreeze—but don’ t use engine
coolant antifreeze for washer fluid
(page 8-33).
• Don’ t use the parking brake if it
might freeze. Instead, shift to P
with an automatic transaxle and to
1 or R with a manual. Block the
rear wheels.
037-8H1E
Snow tires
Your vehicle is originally equipped
with all season radials designed to be
used all year around. In some extreme
climates you may find it necessary to
replace them with snow tires during
the winter months to further improve
traction on snow and ice covered roads.
Use snow tires on all four wheels.
Don’ t go faster than 120 km/h (75
mph). Inflate snow tires 28 kPa (0.3
kgf/cm
2, 4 psi) more than
recommended on the tire pressure
label (driver ’s door), but never more
than the maximum cold-tire pressure
shown on the tires.
Form No. 8P95-EA-00G
Maintenance8-20
083-47B1E
3. Replace the plug tightly after theoil has thoroughly drained.
4. Fill the engine with new oil to the F mark on the dipstick.
5. Securely replace the oil-filler cap.
6. Start the engine and inspect around the drain plug for leaks.
7. Turn it off and wait 5 minutes for the oil to return to the oil pan.
083-48BE
Check the oil level and fill to the F
mark if necessary.
Oil capacity
(General reference only)
2.0-liter engine:
3.3 L (3.5 US qt, 2.9 Imp qt)
2.5-liter engine: 3.7 L (3.9 US qt, 3.3 Imp qt)
NOTE• The indicated engine oil
capacities are for general
reference purposes only. When
adding or changing oil, verify
the engine oil level with the oil
dipstick.
• Use only specified engine oil
(page 8-16).Changing oil filter
Because you need a special tool to
retighten the filter, an Authorized
Mazda Dealer should do the work.
