2001 MAZDA MODEL 626 maintenance

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
R : Replace
Maintenance
8-7
Schedule 2
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Engine valve clearance
I
Engine oil
Except Puerto Rico
R
R
R
R
R
R
R
R
R
R
R
R
Engine o
il
Puerto Rico
Replace every 5,000 km (3,000 miles) or 3 months
Engine oil filter
R
R
R
R
R
R
R
R
R
R
R
R
Drive belts (tension)
I
I
Engine timing belt
*2Inspect for 96,000 km (60,000 miles)
Replace every 168,000 km (105,000 miles)
Hoses and tubes for emission
I* 1
Air filter
I*1
R
I*1
R
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.
*2 If the vehicle is operated in cold districts {below –18° C (0°F)}, replace the timing belt at 96,000 km (60,000 miles).

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
(Oil-permeated air filter cannot be cleaned using the air-blow method.)
R : Replace
Maintenance8-8Schedule 2 (Cont ’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Spark plugs
2.0-liter engine
R
R
Spark plugs
2.5-liter engine
Replace every 96,000 km (60,000 miles)
Idle speed
I
I
Fuel lines and hoses
I*1
I*
1
Cooling system
I
I
Engine coolant
Replace at first 168,000 km (105,000 miles) or 60 months;
after that, every 48,000 km (30,000 miles) or 24 months
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
L : Lubricate
Maintenance
8-9
Schedule 2 (Cont ’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Brake and clutch fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Drum brakes
I
I
Disc brakes
I
I
I
I
Tire inflation pressure and tire wear
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
Power steering fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Front suspension ball joints
I
I
Driveshaft dust boots
I
I
Bolts and nuts on chassis and body
I
I
I
I
Exhaust system heat shields
I
I
All locks and hinges
L
L
L
L
L
L
L
L
L
L
L
L

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
Maintenance8-10Schedule 2 (Cont ’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Washer fluid level
I
I
I
I
I
I
I
I
I
I
I
I
Air-conditioner refrigerant (if installed)
I
I
I
I
Air-conditioner compressor (if installed)
I
I
I
I

Form No. 8P95-EA-00G
Maintenance
8-11
083-1AE
Owner MaintenanceOwner Maintenance Schedule
The owner or a qualified service
technician should make these vehicle
inspections at the indicated intervals to
ensure safe and dependable operation.
Bring any problem to the attention of
an Authorized Mazda Dealer or
qualified service technician as soon as
possible.
 When refueling
• Brake and clutch fluid level
(page 8-25) •
Engine coolant level
(page 8-21)
• Engine oil level
(page 8-17)
• Washer fluid level
(page 8-33)
 At least monthly
• Tire inflation pressures
(page 8-41)
083-46A1E
At least twice a year
(for example, every spring and
fall)
• Automatic transaxle fluid level
(page 8-29)
• Power steering fluid level
(page 8-27)
You can do the following scheduled
maintenance items if you have some
mechanical ability and a few basic
tools and if you closely follow the
directions in this manual.
• Air filter
(page 8-34)

Form No. 8P95-EA-00G
Maintenance8-12•Engine coolant
(page 8-22)
• Engine oil and oil filter
(page 8-18)

083-2A2E
 Owner Maintenance Precautions
Improper or incomplete service may
result in problems. This section gives
instructions only for items easy to
perform.
WARNING
!
Maintenance Procedures:Performing maintenance work on
a vehicle can be dangerous. You
can be seriously injured while
performing some maintenance
procedure. If you lack sufficient
knowledge and experience or the
proper tools and equipment to do
the work, have it done by a
qualified technician.As explained in the Introduction (page
8-2), several procedure can be done
only by a qualified service technician
with special tools.

Form No. 8P95-EA-00G
Maintenance
8-13
Improper owner maintenance during
the warranty period may affect
warranty coverage. For details, read
the separate Mazda Warranty
statement provided with the vehicle. If
you’re unsure about any servicing or
maintenance procedure, have it done
by an Authorized Mazda Dealer.
WARNING
!
Running the Engine:Working under the hood with the
engine running is dangerous. It
becomes even more dangerous
when you wear jewelry or loose
clothing. Either can become
entangled in moving parts and
result in injury. Therefore, if you
must run the engine while
working under the hood, make
certain that you remove all
jewelry (especially rings,
bracelets, watches, and necklaces)
and all neckties, scarves, and
similar loose clothing before
getting near the engine or cooling
fan.

083-3CE
WARNING
!
Electrical Fan and EngineInspection:Inspecting the engine with the
ignition switch in the ON position
is dangerous. The cooling fan
could come on unexpectedly even
when the engine isn’t running.
You could be seriously injured by
the fan. Turn the ignition switch
off and remove the key from the
ignition switch when you inspect
the engine.

Form No. 8P95-EA-00G
Maintenance8-14
083-4AE
 Engine Compartment Overview
Cooling system cap
2.0-liter engine
Engine oil dipstick Air filter
Automatic transaxle fluid-level dipstick
(only for automatic transaxle)
Brake/Clutch fluid reservoir
Fuse block
Battery
Coolant reservoir
Windshield washer fluid reservoir
Power steering fluid reservoir
Engine oil-filler cap
J94A7001A