2001 MAZDA MODEL 626 brake light

Form No. 8P95-EA-00G
In Case of Emergency6-2
071-1A1E
Hazard Warning Flasher
J94A5001
The hazard warning lights warn other
drivers that your vehicle is a traffic
hazard and that they must take
extreme caution when near it.
The hazard warning lights should
always be used when you stop on or
near a roadway.Depress the hazard warning switch
and all four turn signals will flash at
once.
NOTE•
The turn signals don’t work
when the hazard warning lights
are on.
• Check local regulations about
the use of hazard warning lights
while the vehicle is being
towed. They may forbid it.

Q072-3AE
OverheatingIf the temperature gauge indicates
overheating, if you experience power
loss, or if you hear a loud knocking or
pinging noise, the engine is probably
too hot.
If this happens:
1. Drive safely to the side of the road
and park off the right-of-way.
2. Set an automatic transaxle in P, a manual transaxle in neutral. Apply
the parking brake.
3. Turn off the air conditioner.

Form No. 8P95-EA-00G
*Some models.
In Case of Emergency
6-13
DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
11
TAIL
15A
Tail lights, Parking lights, Dashboard illumination, License plate
lights, Switches illumination
12
HORN
15A
Horn
13
(ABS)
20A
Antilock brake system*
14
—
—
—
15
ST. SIGN
10A
Starter signal
16
H/L–L
15A
Head light (Left)
17
H/L–R
15A
Head light (Right)
18
(ABS)
20A
Antilock brake system*

Form No. 8P95-EA-00G
J94S.J94A5008_a
19 20 2115 16 1811 12 1478 10
34 617
13
9
512 22
23
24
*Some models.
In Case of Emergency6-14
\b Fuse panel (driver’s side)DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
1
AUDIO
15A
Audio system*
2
ROOM
15A
Interior lights, Trunk light
3
S. ROOF
15A
Sunroof*
4
METER
10A
Gauges, Back-up lights
5
D. LOCK
30A
Power door lock*
6
HAZARD
15A
Hazard warning lights
7
A/B&ABS
10A
Air bag system, Antilock brake system*
8
—
—
—
9
A/C
10A
Air conditioner*
10
—
—
—
11
TURN
10A
Turn signals
12
WIPER
20A
Windshield wipers and washer

Form No. 8P95-EA-00G
*Some models.
In Case of Emergency
6-15
DESCRIPTION
FUSE
RATING
PROTECTED COMPONENT
13
P. WIND
30A
Power windows*
14
—
—
—
15
RADIO
15A
Audio system*, Socket, outside mirror
16
ENGINE
10A
Engine control system
17
ILLUMI
10A
Tail light, License plate lights, parking lights, Dashboard
illumination
18
STOP
15A
Brake lights, Horn, Cruise control*
19
CIGAR
15A
Accessory socket, clock*, radio*, outside mirror
20
—
—
—
21
—
—
—
22
P. SEAT
30A
Power seat*
23
M. DEF
15A
Mirror defroter*
24
P. POINT
15A
Power point

Form No. 8P95-EA-00G
Appearance Care7-8Pay special attention to removing salt,
dirt, mud, and other foreign material
from the underside of the wings, and
make sure the drain holes in the lower
edges of the doors and rocker panels
are clean.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits
can damage the finish if not removed
immediately. When prompt washing
with plain water is ineffective, use a
mild soap made for use on vehicles.
Thoroughly rinse off all soap with
lukewarm or cold water. Don’t allow
soap to dry on the finish. After washing the vehicle, dry it with a
clean chamois to prevent water spots
from forming.
WARNING
!
Driving with Wet Brakes:Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to
one side when braking could
result in a serious accident. Light
braking will indicate whether the
brakes have been affected. Dry
the brakes by driving very slowly
and applying the brakes lightly
until brake performance is
normal.

Waxing
Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle
before waxing it. In addition to the
vehicle body, wax the metal trim to
maintain its luster.
1. Use wax which contains no abrasives. Waxes containing
abrasive will remove paint and
could damage bright metal parts.
2. Use a good grade of natural wax for metallic, mica, and solid colors.
3. When waxing, coat evenly with the sponge supplied or a soft cloth.

Form No. 8P95-EA-00G
Appearance Care7-10
078-5A1E

Underbody Maintenance
Road chemicals and salt used for ice
and snow removal and solvents used
for dust control may collect on the
underbody. If not removed, they will
speed up rusting and deterioration of
such underbody parts as fuel lines,
frame, floor pan, and exhaust system,
even though these parts may be coated
with anticorrosive material.
Thoroughly flush the underbody and
wheel housings with lukewarm or cold
water at the end of each winter. Try
also to do this every month.
Pay special attention to these areas
because they easily hide mud and dirt. It will do more harm than good to
wet down the road grime without
removing it.
The lower edges of doors, rocker
panels, and frame members have drain
holes that should not be clogged.
Water trapped there will cause rusting.
WARNING
!
Driving with Wet Brakes:Driving with wet brakes is
dangerous. Increased stopping
distance or the vehicle pulling to
one side when braking could
result in a serious accident. Light
braking will indicate whether the
brakes have been affected. Dry
the brakes by driving very slowly
and applying the brakes lightly
until brake performance is
normal.

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
(Oil-permeated air filter cannot be cleaned using the air-blow method.)
R : Replace
Maintenance8-8Schedule 2 (Cont ’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Spark plugs
2.0-liter engine
R
R
Spark plugs
2.5-liter engine
Replace every 96,000 km (60,000 miles)
Idle speed
I
I
Fuel lines and hoses
I*1
I*
1
Cooling system
I
I
Engine coolant
Replace at first 168,000 km (105,000 miles) or 60 months;
after that, every 48,000 km (30,000 miles) or 24 months
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.

Form No. 8P95-EA-00G
The number in ( ) shows the bulb
number.

Brake lights/Taillights27/7W (2057)

Rear-turn signal lights27W (1156NA)

Back up light 18W (921)
For bulb access:
Remove the
trunk end trim
J94A7035A
J94A7035A+J94S8005+06
J94S8006 J94S8005J94S8001–1
Maintenance
8-49

Q083-44A1E
Replacing a Bulb (Rear)