2001 LAND ROVER FREELANDER headlamp

CONTENTS
16 CONTENTS
PANEL REPAIRS...................................................................................... 77-2-1
BODY REPAIRS
General ........................................................................................................................................... 77-2-1
REPLACEMENT PANELS
Serviceable Panels ......................................................................................................................... 77-2-3
Inner front end panels ..................................................................................................................... 77-2-4
Outer body side panels - 3 door ..................................................................................................... 77-2-5
Outer body side panels - 5 door ..................................................................................................... 77-2-6
Front inner body side panels - 3 door ............................................................................................. 77-2-7
Front inner body side panels - 5 door ............................................................................................. 77-2-8
Rear inner body side panels - 3 door.............................................................................................. 77-2-9
Rear inner body side panels - 5 door.............................................................................................. 77-2-10
Roof assemblies - 3 door ................................................................................................................ 77-2-11
Roof assembly - 5 door................................................................................................................... 77-2-12
Rear end panels ............................................................................................................................. 77-2-13
Door assemblies ............................................................................................................................. 77-2-14
WELDING PROCEDURES
ECU locations (3 door model shown, 5 door model similar) ........................................................... 77-2-15
General Welding Precautions ......................................................................................................... 77-2-16
PROCEDURES
Panel replacement procedure......................................................................................................... 77-2-19
REPAIRS
Front bulkhead assembly ............................................................................................................... 77-2-25
Bonnet locking platform .................................................................................................................. 77-2-27
Headlamp mounting panel .............................................................................................................. 77-2-28
Front lower crossmember .............................................................................................................. 77-2-29
Front sidemember (complete) ........................................................................................................ 77-2-30
Front sidemember (front section) ................................................................................................... 77-2-32
Front valance assembly ................................................................................................................. 77-2-33
Valance upper front ....................................................................................................................... 77-2-36
Valance front .................................................................................................................................. 77-2-37
Valance outer reinforcement .......................................................................................................... 77-2-39
'A' post - 3 door .............................................................................................................................. 77-2-40
'A' post - 5 door .............................................................................................................................. 77-2-41
Sill reinforcement - 3 door .............................................................................................................. 77-2-43
Sill reinforcement - 5 door .............................................................................................................. 77-2-44
'B/C' post reinforcement - 3 door ................................................................................................... 77-2-45
'B/C' post reinforcement - 5 door ................................................................................................... 77-2-46
Complete rear quarter - 3 door ...................................................................................................... 77-2-48
Complete rear quarter - 5 door ...................................................................................................... 77-2-50
Outer rear wheel arch - 3 door ....................................................................................................... 77-2-53
Outer rear wheel arch - 5 door ....................................................................................................... 77-2-54
Inner 'e' post - 3 door ..................................................................................................................... 77-2-55
Inner 'e' post - 5 door ..................................................................................................................... 77-2-56
Rear floor crossmember assembly ................................................................................................ 77-2-58
Rear floor ........................................................................................................................................ 77-2-59
Floor longitudinal ............................................................................................................................ 77-2-60
Front roof assembly - 3 door .......................................................................................................... 77-2-61
Rear roof assembly - 3 door .......................................................................................................... 77-2-61
Roof assembly - 5 door .................................................................................................................. 77-2-62
TIMES
TIME SCHEDULES ........................................................................................................................ 77-2-63

CONTENTS
20 CONTENTS
LIGHTING.................................................................................................. 86-2-1
ADJUSTMENTS
Headlamps - pair - align beam - up to 04MY .................................................................................. 86-2-1
Headlamps - pair - align beam - from 04MY ................................................................................... 86-2-1
REPAIRS
Headlamp assembly - up to 04MY.................................................................................................. 86-2-3
Headlamp assembly - from 04MY .................................................................................................. 86-2-4
Lamp assembly - flasher side repeater - front ................................................................................ 86-2-5
Lamp assembly - tail ....................................................................................................................... 86-2-5
Lamp assembly - number plate ...................................................................................................... 86-2-6
Lamp assembly - fog/driving - from 04MY ...................................................................................... 86-2-6
Lamp assembly - rear ..................................................................................................................... 86-2-7
Lamp assembly - centre high mounted stop (CHMSL) ................................................................... 86-2-7
Lamp assembly - glove compartment ............................................................................................. 86-2-8
Lamp assembly - load space .......................................................................................................... 86-2-8
Switch - headlamp levelling ............................................................................................................ 86-2-9
Switch - glove compartment ........................................................................................................... 86-2-9
Switch - hazard warning ................................................................................................................. 86-2-10
Switch - combined direction indicator/headlight/horn ..................................................................... 86-2-10
Switch - rear fog lamp ..................................................................................................................... 86-2-11
CONTROL UNITS ..................................................................................... 86-3-1
REPAIRS
Control unit - window lift ................................................................................................................. 86-3-1
Relay - power folding mirrors - from 02MY ..................................................................................... 86-3-1
Central Control Unit (CCU) ............................................................................................................. 86-3-2
Control Unit - power fold mirrors - up to 02MY ............................................................................... 86-3-3
SECURITY................................................................................................. 86-4-1
REPAIRS
Solenoid/motor - taildoor................................................................................................................. 86-4-1
Switch/push - horn .......................................................................................................................... 86-4-2
Horn ................................................................................................................................................ 86-4-2
Immobilisation - electronic control unit (ECU) - ............................................................................. 86-4-3
Sensor - volumetric - alarm system - 3 door ................................................................................... 86-4-3
Module (ECU) - volumetric - alarm system - 5 door - without sunroof ........................................... 86-4-5
Module (ECU) - volumetric - alarm system - 5 door - with sunroof ................................................ 86-4-7
Receiver - alarm system ................................................................................................................. 86-4-10
Coil - passive immobilisation - alarm system .................................................................................. 86-4-10

MAINTENANCE
10-4 MAINTENANCE
Seats and Seat Belts
Check
1.Check seat frames are secured to floor and
show no signs of movement.
2.Check operation of seat slide and tilt
mechanisms, ensuring there is no excessive
play between seat cushion and seat back.
3.Check tightness of accessible seat fixings.
4.Fully extract seat belt and allow it to return
under its own recoil mechanism.
5.Check entire length of seat belt webbing for
signs of fraying or damage. Repeat for all belts.
6.Check security of seat belt upper mountings.
7.Check for correct operation of seat belt height
adjusters.
8.Check security of seat belt buckle mountings.
9.Connect each belt to the correct buckle, check
seat belt buckle and tongue are secure.
Release seat belt buckle and check for correct
operation.
10.Check tightness of accessible seat belt
mountings.
Lamps, Horns and Warning Indicators
Check
1.Switch on side, head and tail lights and check
operation.
2.Check headlamp dim/dip operation.
3.Check headlamp levelling operation.
4.Check turn signals and hazard warning lights
operation.
5.Press brake pedal and check operation of
brake lights.
6.Check all exterior lamp lenses for clarity and
condition. Pay particular attention to head lamp
lenses for signs of stone chips or damage.
7.Check horn for loud clear sound.
8.Check operation of all instrument pack warning
and indicator lights.
9.Check for correct operation of interior courtesy
lights.
10.Switch on headlamps (with ignition switch at 'O'
position) and check light reminder warning
operates when door is opened.

INTERIOR TRIM COMPONENTS
REPAIRS 76-3-15
13.Disconnect 2 main harness to fascia harness
multiplugs.
14.Remove 12 bolts securing fascia.
15.With assistance remove fascia.
16.Remove 4 screws, disconnect 3 multiplugs
from switches, and remove instrument bezel
finisher.17.Remove 2 screws from instrument upper cover
and remove cover.
18.Disconnect 3 multiplugs from instrument pack.
19.Release mirror and headlamp levelling
switches.
20.Disconnect multiplugs from mirror switch and
headlamp levelling switch.

INTERIOR TRIM COMPONENTS
76-3-18 REPAIRS
Refit
1.Fit fascia and coin tray mats.
2.Fit immobilisation ECU to fascia and secure
with nuts.
3.Connect multiplug to immobilisation ECU.
4.Fit switch blank.
5.Fit glove box locks to fascia and secure with
screws.
6.Fit glove box and secure with screws.
7.Fit glove box lamp and mat.
8.Fit glove box lids and secure hinge pins.
9.Fit face level vents and seals to fascia.
10.Fit centre bracket and secure with screws.
11. Models without passenger airbag: Fit grab
handle and secure with nuts.
12.Fit instrument pack lower cover and secure with
screws.
13.Fit instrument pack to fascia and secure with
screws.
14.Fit fascia harness to fascia and secure with
clips.
15.Connect Lucars to glove box lamp and switch.
16.Connect multiplugs to mirror switch and
headlamp levelling switch.
17.Fit mirror switch and headlamp levelling switch.
18.Connect multiplugs to instrument pack.
19.Fit instrument pack upper cover and secure
with screws.
20.Connect multiplugs to switches on instrument
bezel finisher, fit bezel and secure with screws.
21.With assistance fit fascia to vehicle and secure
with bolts.22.Connect fascia harness multiplugs to main
harness.
23. Models with passenger airbag: Fit passenger
airbag.

+ RESTRAINT SYSTEMS, REPAIRS,
Air bag - fascia - passenger - up to 04MY.
24. Models without passenger airbag: Fit fascia
stowage box.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Stowage box - fascia.
25.Fit 'A' post upper trim finishers.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim finisher - 'A' post - upper -
renew.
26.Fit clock.

+ INSTRUMENTS, REPAIRS, Clock.
27.Open drivers glove box lid and remove fuse box
cover.
28.Connect multiplugs to fusebox.
29.Fit fusebox cover and close glove box lid.
30.Fit steering column lower cover and secure with
screws.
31.Fit wiper/indicator switch and tighten clamping
screw.
32.Connect multiplugs to wiper/indicator switch.
33.Fit rotary coupler.

+ RESTRAINT SYSTEMS, REPAIRS,
Rotary coupler - (SRS) air bag system.
34.Fit front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.

BODY DIMENSIONS
BODY DIMENSIONS 77-1-3
Dimensional Illustrations
X,Y,Z Dimensional Information
Front end dimensional information
No. Description X Y Z
1 Front damper large hole 977 (38.464) 578.5 (22.775) 718.5 (28.287)
2 Front damper, inboard fixing hole 975.4 (38.401) 514.9 (20.271) 693.7 (27.311)
3 Wing, front fixing 605 (23.818) 669 (26.338) 806 (31.732)
4 Wing, rear fixing, 1220 (48.031) 690 (27.165) 848.2 (33.393)
5 Outboard headlamp fixing hole 465 (18.307) 615 (24.212) 788 (31.023)
6 Inboard headlamp fixing hole 377 (14.842) 485 (19.094) 772 (30.393)
7 Bonnet locking platform, jig location hole 390 (15.354) 445 (17.519) 765 (30.118)
8 Sidemember, jig location hole 500 (19.685) 446 (17.559) 388 (15.275)
9 Headlamp mounting panel, jig location hole 239 (9.409) 536 (21.102) 335 (13.188)
10 Front valance, jig location hole 540 (21.259) 671.7 (26.444) 525 (20.669)

BODY DIMENSIONS
77-1-10 BODY DIMENSIONS
Front end point to point information
Item From To Length
A Headlamp fixing Wing, forward fixing 150 (5.905)
B Headlamp fixing Wing, rear fixing 1507.7 (59.358)
C Wing, forward fixing `LH` Wing, forward fixing `RH` 1338 (13.307)
D Headlamp fixing Spring location, inboard hole 520.1 (20.476)
E Spring location, inboard hole Headlamp fixing 1239.9 (48.814)
F Spring location, inboard hole Wing, rear fixing 300.8 (11.842)
G Spring location, inboard hole `LH` Spring location, inboard hole `RH` 1029.8 (40.543)
H Wing, rear fixing `LH` Wing, rear fixing `RH` 1380 (54.330)

BODY DIMENSIONS
BODY GAPS AND PROFILES 77-1-17
BODY GAPS AND PROF ILE S
Gap and Profile Measurements
The following information is to be used as a guide to assist the technician in refitting exterior body panels and trim
items so as to achieve a correctly aligned vehicle.
Measurements shown are in millimeters and inches. The measurements shown in brackets are in inches.
Gap a - Bonnet to headlamp. Even gaps side to side, tolerance ± 1.0 mm (0.040).
Gap b - Bonnet to bumper overrider. Even gaps side to side, tolerance ± 1.0 mm (0.040).
Gap c - Headlamp to bumper overrider. Visually even gaps within 2.0 mm (0.080).