2001 LAND ROVER FREELANDER ECU

DRIVER CONTROLS
REPAIRS 86-8-3
Sounder - parking aid - rear - from 04MY
$% 86.54.19
Remove
1. 3 door models: Remove RH rear lower quarter
trim casing.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - rear quarter - lower
- 3 door.
2. 5 door models: Remove RH rear lower quarter
trim casing.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - rear quarter - lower
- 5 door.
3.Disconnect multiplug from parking aid sounder.
4.Remove 2 nuts securing parking aid sounder to
mounting bracket and remove sounder.
Refit
1.Position parking aid sounder to mounting
bracket and secure with nuts.
2.Connect multiplug to parking aid sounder.
3. 5 door models: Fit RH rear lower quarter trim
casing.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - rear quarter - lower
- 5 door.
4. 5 door models: Fit RH rear lower quarter trim
casing.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - rear quarter - lower
- 3 door.
Switch - handbrake warning
$% 86.65.45
Remove
1.Remove rear console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - rear.
2.Disconnect Lucar from handbrake warning
switch.
3.Release switch from handbrake.
Refit
1.Fit switch to handbrake and connect Lucar.
2.Fit rear console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - rear.
M86 6117

DRIVER CONTROLS
86-8-4 REPAIRS
Switch - hazard warning - from 04MY
$% 86.65.50
Remove
1.Remove fascia cup holder.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Cup holder - fascia - from 04MY.
2.Release hazard switch from fascia carrier.
3.Disconnect multiplug and remove hazard
warning switch.
Refit
1.Position hazard warning switch and connect
multiplug.
2.Fit switch to fascia carrier.
3.Fit fascia cup holder.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Cup holder - fascia - from 04MY.
Cigar lighter - front
$% 86.65.60
Remove
1.Remove front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
2.Remove cigar lighter element.
3.Remove bulb holder from lighter.
4.Release cigar lighter body from console and
remove.
Refit
1.Fit and secure cigar lighter body to console.
2.Fit bulb holder to lighter.
3.Fit lighter element.
4.Fit front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.

DRIVER CONTROLS
REPAIRS 86-8-5
Switch - control - exterior mirror
$% 86.65.75
Remove
1.Release mirror switch from fascia and
disconnect multiplug.
Refit
1.Position switch, connect multiplug and secure
switch to fascia.

NAVIGATION SYSTEM
REPAIRS 87-1
NAVIGATION SYST EM REPAIRS
Interface unit - remote control
$% 86.53.15
Remove
1.Remove front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
2.Release interface ECU from bracket,
disconnect multiplug and remove ECU.
Refit
1.Secure interface ECU in bracket and connect
multiplug.
2.Fit front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
Display unit - navigation system
$% 86.53.20
Remove
1.Fit tool LRT-86-009 into slots, ensuring correct
handed tool is in correct slot.
The tools are stamped with 'TOP L' and 'TOP
R', ensure the stampings are facing upwards
when removing the unit.
2.Pull unit from fascia.
3.Disconnect 3 multiplugs and 2 coax cables,
remove unit.
4.Push retaining clips inwards and remove keys.
Refit
1.Position unit to fascia, connect multiplugs and
coax cables.
2.Slide unit in fascia until retaining clips engage.
3.Enter security code, check system is
operational.
M86 5745
M86 5741

INSTRUMENTS
REPAIRS 88-1
INS TRUMENTS REPAIRS
Clock
$% 88.15.07
Remove
1.Remove clock finisher from fascia.
2.Remove 2 screws securing clock to fascia.
3.Release clock to gain access to multiplug.
4.Disconnect multiplug and remove clock.Refit
1.Position clock to fascia and connect multiplug.
2.Fit and tighten screws securing clock to fascia.
3.Fit clock finisher to fascia.

INSTRUMENTS
88-2 REPAIRS
Instrument panel - up to 04MY
$% 88.20.01
Remove
1.Make the SRS system safe.

+ GENERAL INFORMATION,
Supplementary restraint system
precautions.
2.Remove instrument cowl.

+ INSTRUMENTS, REPAIRS, Cowl -
instrument - up to 04MY.
3.Remove 4 screws and remove instrument
panel upper cover.
4.Remove 4 screws securing instrument panel to
fascia.5.Disconnect 4 multiplugs and remove
instrument panel.
Refit
1.Position instrument panel and connect
multiplugs.
2.Fit instrument panel to fascia and secure with
screws.
3.Fit instrument panel upper cover and secure
with screws.
4.Fit instrument cowl.

+ INSTRUMENTS, REPAIRS, Cowl -
instrument - up to 04MY.
5.Connect battery leads, earth lead last.

INSTRUMENTS
REPAIRS 88-3
Instrument panel - from 04MY
$% 88.20.01
Remove
1.Remove instrument cowl.

+ INSTRUMENTS, REPAIRS, Cowl -
instrument - from 04MY.
2.Remove 2 screws securing instrument pack to
fascia, release pack from lower mounting lugs
and move aside.
3.Disconnect 3 multiplugs from instrument pack.
4.Release clip, securing aerial receiver wire from
underside of instrument pack retaining bracket.
5.Remove instrument pack.Refit
1.Position instrument pack and connect
multiplugs.
2.Position and secure aerial wire to retaining
bracket.
3.Fit instrument pack to fascia and secure with
screws.
4.Fit instrument cowl.
+ INSTRUMENTS, REPAIRS, Cowl -
instrument - from 04MY.
M88 0365

INSTRUMENTS
REPAIRS 88-5
Cowl - instrument - from 04MY
$% 88.20.02
Remove
1.Release 5 clips securing steering column
nacelle gaiter to the instrument cowl. Remove
gaiter for access to screws.
2.Remove 6 screws securing instrument cowl to
fascia.3.Release instrument cowl from fascia,
disconnect multiplugs and remove assembly.
NOTE: Do not carry out further dismantling if
component is removed for access only.
4.Remove switches and switch blanks from cowl.
Refit
1.Fit switches and switch blanks to cowl.
2.Fit steering column gaiter to instrument cowl.
3.Position cowl and connect multiplugs to
switches.
4.Fit cowl and tighten screws.
5.Fit and secure steering column gaiter to
nacelle.
M88 0363