LIGHTING
ADJUSTMENTS 86-2-1
LIGHTING ADJUST ME NTS
Headlamps - pair - align beam - up to
04MY
$% 86.40.17
Check
1.Align beam setting equipment to headlamp.
2.Switch on headlamps. Headlamp setting
lNon NAS models: 1.2% below horizontal
and parallel.
lNAS models: 0.4% below horizontal and
parallel.
Adjust
1.Adjust headlamp using a 6 mm Allen key.
2.Turn Allen screw for vertical alignment.
3. Non NAS models: Turn Allen screw for
horizontal alignment.
4.Align beam setting equipment to 2nd
headlamp.
5.Adjust 2nd headlamp as detailed above.
6.Switch off headlamps and remove beam setting
equipment.
Headlamps - pair - align beam - from
04MY
$% 86.40.17
Check
1.Align beam setting equipment to headlamp.
2.Switch on headlamps. Headlamp setting:
lNon NAS models: 1.2% below horizontal
and parallel.
lNAS models: 0.4% below horizontal and
parallel.
Adjust
1.Rotate inboard adjuster for vertical alignment.
2. Non NAS models: Rotate outboard adjuster
for horizontal alignment.
NOTE: The outboard adjuster is accessible via
a slot in rear face of headlamp.
3.Align beam setting equipment to 2nd
headlamp.
4.Adjust 2nd headlamp as detailed above.
5.Switch off headlamps and remove beam setting
equipment.
