2001 INFINITI QX4 ignition

[x] Cancel search: ignition

Page 275 of 2395

INFINITI QX4 2001  Factory Service Manual 10 CHECK SHIFT LOCK SOLENOID
ICheck operation by applying battery voltage shift lock solenoid harness terminals 1 and 3.
SAT762J
OK or NG
OK©GO TO 11.
NG©Replace shift lock solenoid.
11 CHECK SHIFT

Page 391 of 2395

INFINITI QX4 2001  Factory Service Manual ABS
DESCRIPTION...............................................................32
Purpose......................................................................32
Operation .............................

Page 397 of 2395

INFINITI QX4 2001  Factory Service Manual SBR995
Bleeding Brake System=NBBR0009CAUTION:
ICarefully monitor brake fluid level at master cylinder dur-
ing bleeding operation.
IIf master cylinder is suspected to have air inside, bleed air
from m

Page 421 of 2395

INFINITI QX4 2001  Factory Service Manual PurposeNBBR0087The Anti-Lock Brake System (ABS) consists of electronic and hydraulic components. It allows for control of
braking force so locking of the wheels can be avoided.
1) Improves proper trac

Page 430 of 2395

INFINITI QX4 2001  Factory Service Manual Self-diagnosisNBBR0095FUNCTIONNBBR0095S01IWhen a problem occurs in the ABS, the warning lamp on the
instrument panel comes on. To start the self-diagnostic results
mode, ground the self-diagnostic (ch

Page 433 of 2395

INFINITI QX4 2001  Factory Service Manual SBR665E
CONSULT-II Inspection Procedure=NBBR0097SELF-DIAGNOSIS PROCEDURENBBR0097S011. Turn ignition switch OFF.
2. Connect CONSULT-II to data link connector.
3. Start engine.
4. Drive vehicle over 30

Page 434 of 2395

INFINITI QX4 2001  Factory Service Manual SELF-DIAGNOSTIC RESULTS MODENBBR0097S02
Diagnostic item Diagnostic item is detected when ... Reference Page
FR RH SENSOR*1
[OPEN]ICircuit for front right wheel sensor is open.
(An abnormally high inpu

Page 435 of 2395

INFINITI QX4 2001  Factory Service Manual PBR455D
DATA MONITOR PROCEDURENBBR0097S031. Turn ignition switch OFF.
2. Connect CONSULT-II to data link connector.
3. Turn ignition switch ON.
4. Touch ªSTARTº on CONSULT-II screen.
SBR670E
5. Touc