
 
Contents
 
Overview
Controls and features
 
Cockpit16
Instrument cluster18
Indicator and warning lamps20
Multifunction steering wheel 
(MFL)24
Hazard warning flashers25
Warning triangle25
First-aid kit25
Refueling26
Fuel specifications27
Tire inflation pressure27
 
Opening and closing:
 
Keys32
Electronic vehicle 
immobilizer33
Central locking system34
Opening and closing Ð from the 
outside34
Opening and closing Ð from the 
inside38
Luggage compartment lid39
Luggage compartment40
Alarm system42
Electric power windows44
The manual convertible top45
The fully automatic convertible 
top48
Wind deflector50
 
Adjusting:
 
Seats52
Seat and mirror memory56
Steering wheel57
Mirrors57
Car Memory, Key Memory59
 
Passenger safety systems:
 
Safety belts60
Airbags61
Transporting children safely64
Rollover protection system67
 
Driving:
 
Steering/Ignition lock69
Starting the engine69
Switching off the engine70
Parking brake71
Manual transmission72
Automatic transmission with 
Steptronic73
Turn signal indicator/Headlamp 
flasher76
Washer/Wiper system76
Rear window defroster78
Cruise control79
 
Everything under control:
 
Odometer81
Tachometer81
Energy Control81
Fuel temperature gauge82
Coolant temperature gauge82
Service Interval Display82
Check Control83
Computer83
 
Technology for driving comfort 
and safety:
 
Park Distance Control (PDC)87
Automatic Stability Control plus 
Traction (ASC+T)88
Dynamic Stability Control 
(DSC)89 
Tire Pressure Control (RDC)91
 
Contents 

30n
Opening and closing:
Keys32
Electronic vehicle 
immobilizer33
Central locking system34
Opening and closing Ð from the 
outside34
Opening and closing Ð from the 
inside38
Luggage compartment lid39
Luggage compartment40
Alarm system42
Electric power windows44
The manual convertible top45
The fully automatic convertible 
top48
Wind deflector50
Adjusting:
Seats52
Seat and mirror memory56
Steering wheel57
Mirrors57
Car Memory, Key Memory59
Passenger safety systems:
Safety belts60
Airbags61
Transporting children safely64
Rollover protection system67
Controls 

57n
IndexDataTechnologyRepairsCar careControlsOverview
Seat and mirror memory* 
 Adjusting steering wheel  Mirrors 
Passenger side exterior mirror tilt 
function(automatic curb monitor
*)
1 Move the mirror selector switch 1 to 
the "driver's mirror" position.
2 When the selector lever is placed in 
"Reverse," the passenger-side mirror 
tilts downward. This allows the driver 
to see the area directly adjacent to 
the vehicle during parking (curbs, 
etc.).
You can deactivate this automatic 
feature: set the mirror selection switch 
to the "passenger side" position.
462us058
1 Push the locking lever downward.
2 Adjust the steering wheel (fore/aft 
and up/down) to the desired position.
3 Pull back the lever again to clamp the 
steering wheel in the new position.
Do not adjust the steering wheel 
while the vehicle is moving. If you 
do so, there is a risk of accident from 
unexpected movement.<460de073
Exterior mirrors1 Switch for 4-way adjustment
2 Selection switch for changing 
between mirrors462us057 

77n
IndexDataTechnologyRepairsCar careControlsOverview
Washer/Wiper system1 Intermittent mode or rain 
sensor
* 
Intermittent mode:
You can use rotary dial 6 to select from 
four wipe intervals. 
In addition, the wipe interval is varied 
automatically depending on road 
speed.
Rain sensor:
The rain sensor is positioned on the 
windshield, directly ahead of the inte-
rior rearview mirror. When the rain 
sensor is activated, the windshield 
wiper is controlled automatically, 
depending on the degree of wetness on 
the windshield (in both snow and rain). 
You do not have to be concerned with 
switching the windshield wiper on or off 
or adjusting the wipe interval between 46cde095
intermittent and full wipe. Instead, you 
can concentrate fully on the traffic 
conditions. This is especially important 
under adverse weather conditions. 
To activate the rain sensor: 
From ignition key position 1 and up, you 
can move the lever to position 1. The 
wipers travel once across the wind-
shield, regardless of the weather.
You can leave the lever permanently in 
position 1. It is then only necessary to 
activate the rain sensor from ignition 
key position 1 and up. To do this,
>turn rotary dial 6 briefly or
>use cleaning windshield 5.
To adjust the sensitivity of the rain 
sensor: 
Turn rotary dial 6.
Deactivating the rain sensor:
Put lever in position 0.
Turn the rain sensor off when 
passing through an automatic car 
wash. Failure to do so could result in 
damage caused by undesired wiper 
activation.<
2 Normal wiper speedWhen the vehicle is stationary, the 
wipers switch automatically to intermit-
tent wipe (not on vehicles with rain 
sensor).3 Fast wiper speedWhen the vehicle is stationary, the 
wipers operate at normal speed (not on 
vehicles with rain sensor).5 Cleaning windshield The system sprays washer fluid against 
the windshield and activates the wipers 
for a brief period.
If you pull the lever only briefly, the 
system sprays washer fluid onto the 
windshield without activating the 
wipers. 

109n
IndexDataTechnologyRepairsCar careControlsOverview
BMW Universal Transmitter
*
Programming 1 Channel keys 
2 Indicator lamp
Read and comply with the safety 
precautions on the previous 
page.< 
1 Turn the ignition key to position 2. 
2 For initial use: press and hold both 
outside keys 1 until the indicator 
lamp 2 flashes, and then release 
them. The three channel keys are 
cleared.46cus023
3 Hold the original handheld transmitter 
up to the receiver integrated into the 
mirror, i. e. near the buttons, a 
maximum of 2 in (5 cm) away.
4 Press the transmission key of the 
original handheld transmitter 
(arrow  2) and the desired channel key 
of the Integrated Universal Remote 
Control (arrow 1) simultaneously. 
Release both keys as soon as the 
indicator lamp flashes rapidly.
5 To program other original handheld 
transmitters, repeat steps 3 and 4. 
The corresponding channel key is now 
programmed with the signal of the orig-
inal handheld transmitter. 46cus024
Programming a handheld 
transmitter with conversion code 
Read and comply with the safety 
precautions on the previous 
page.< 
When programming the BMW Universal 
Transmitter, consult the instructions for 
the specific device. For using the BMW 
Universal Transmitter with a conver-
sion-code system, note the following 
supplemental programming instruc-
tions: 
A second person facilitates 
programming of the BMW 
Universal Transmitter.< 
1 Program the BMW Universal Trans-
mitter as described previously under 
"Programming".
2 Press and hold the programming key 
on the receiver of the device for 
approximately two seconds until the 
programming lamp on the device 
comes on.
3 Press the desired channel key of the 
BMW Universal Transmitter three 
times.
If you have additional questions, 
please consult your BMW 
center.<  

Overview
Controls and features
Operation, care
and maintenance
Owner service procedures
Technical data
Index Advanced technology
187n
IndexDataTechnologyRepairsCar careControlsOverview
Adaptive Transmission Control 
(ATC)188
Airbags189
Automatic Stability Control plus 
Traction (ASC+T)/Dynamic 
Stability Control (DSC)189
Radio reception190
Safety belt tensioner190
Interior rearview mirror 
with automatic dimming 
feature191
Rain sensor191
Tire Pressure Control (RDC)192
Self-diagnostics192
Rollover protection system193
Xenon lamps193
Technol- 

191n
IndexDataTechnologyRepairsCar careControlsOverview
Interior rearview mirror with automatic dimming feature
* Rain sensor
* 
The interior rearview mirror with auto-
matic dimming feature reduces blinding 
from following traffic by adapting the 
intensity of the reflected images to 
correspond to levels of light registered 
by the unit's sensors. The mirror reverts 
to its undimmed setting as soon as the 
light source disappears. One lamp 
sensor is mounted on the front of the 
mirror housing. This sensor, which is 
directed forward, measures light inten-
sity in the area ahead of the vehicle. 
The second sensor is integrated within 
the mirror's glass. The electronic 
control system compares the light 
intensity from front and rear. The differ-
ence provides the basic parameter 
used to modulate an electrical current 
and induce chemical changes in a 
semisolid layer incorporated in the lens.46cus036
The semisolid reacts chemically to this 
electrical current, thus providing 
dimming of the mirror through an infi-
nitely-variable range (electrochromic 
technology).
As a result, it is no longer necessary to 
dim the mirror manually, and the driver 
can concentrate completely on traffic 
conditions.
Depending on the degree of wetness on 
the windshield, the rain sensor controls 
the operation of the windshield wipers. 
Infrared light is carried along the surface 
of the windshield in an optical conductor 
in such a manner that it is reflected 
completely when the windshield is dry. 
The quantity of reflected light is 
measured. If there is moisture on the 
glass, the amount of light reflected is 
reduced since the infrared light at the 
surface of the windshield can escape. 
The quantity of reflected light is thus a 
means of gauging the degree of wetness 
on the windshield. When the system is 
set to the "Intermittent" wiper speed, the 
wipers react immediately Ð if water is 
splashed onto the windshield by vehicles 
traveling ahead of you, for example. As a 
result, the rain sensor provides a contri-
bution to driving safety and comfort.
390de133 

Everything from A to Z
207n
IndexDataTechnologyRepairsCar careControlsOverview
Interlock69 
Intermittent mode, wiper 
system76 J 
Jack173 
Jump-starting183 K 
Key Memory59 
Keys32 
with remote control32 L 
Lamps and bulbs166 
LAMPS ON warning93 
Lashing eyes115 
LATCH attachment of the 
child seat64 
Leather care155 
Length197 
License plate lamp, bulb 
replacement171 
Light-alloy wheels137 
Lighter112 
Loads, securing114 
Load-securing devices115 
Low beam headlamps93 
bulb replacement167 
Lug bolts174 Luggage 
compartment40,41 
capacity198 
emergency release39 
floor panel40 
lid39 
lighting39 
lock separately39 
remote control36 
Luggage compartment 
lamps, bulb 
replacement172 
Luggage rack116 
Lumbar support55 
M 
M+S tires136 
Maintenance82,150 
Malfunction displays83 
Manual convertible top, 
operating45 
Manual transmission72 
Manually controlled 
recirculated-air105 
Memory57 
MFL (Multi-function steering 
wheel)24 
Microfilter99,180 
Mirror memory57 
Mirrors57 
Mobile phones129 Modifications, 
technical6,161 
Motion sensor, interior43 
Mounting child safety 
seat64 
Mounting the roof 
carrier130 
Multi-function steering 
wheel (MFL)24 
N 
Navigation system, refer to 
the radio Owner's Manual O 
OBD interface socket162 
Odometer81 
Oil 
additives145 
capacity199 
consumption145 
dipstick145 
quality146 
specifications146 
viscosity146 
Oil change intervals, see the 
Service and Warranty 
Information Booklet (US 
models)/Warranty and 
Service Guide Booklet 
(Canadian models) Oil filter change199 
Oil level 
check145 
indicator lamp20 
Oil pressure, indicator 
lamp20 
OILSERVICE82 
Onboard tool kit166 
Opening and closing 
from the inside38 
from the outside34 
Operating the convertible
top manually in the event 
of an electrical 
malfunction181 
Outside temperature 
display84 
P 
Paint blemishes152 
Paint, care152 
Paintwork 
minor repairs153 
waxing153 
Park Distance Control 
(PDC)87 
Parking brake71 
Parking help87 
Parking lamps94 
Parking, winter128