SPECIFICATIONS
8-3
8
Air pressure (cold tire)
Up to 90 kg load*
Front 250 kPa; 2.50 kg/cm
2; 2.50 bar
Rear 250 kPa; 2.50 kg/cm2; 2.50 bar
90 kg load ~ maximum
load*
Front 250 kPa; 2.50 kg/cm2; 2.50 bar
Rear 290 kPa; 2.90 kg/cm2; 2.90 bar
High speed riding
Front 250 kPa; 2.50 kg/cm2; 2.50 bar
Rear 250 kPa; 2.50 kg/cm2; 2.50 bar
* Load is total weight of cargo, rider, passenger and accessories.
Wheels
Front
Ty p e C a s t
Size 17 ´ MT 3.50
Rear
Ty p e C a s t
Size 17 ´ MT 5.50
Brakes
Front
Type Dual disc brake
Operation Right hand operation
Fluid DOT 4Rear
Type Single disc brake
Operation Right foot operation
Fluid DOT 4
Suspension
Fr o n t
Ty p e Te l e s c o p i c f o r k
Rear
Type Swingarm (link suspension)
Shock absorbers
Front Coil spring / oil damper
Rear Coil spring / gas-oil damper
Wheel travel
Front 130 mm
Rear 120 mm
Electrical
Ignition system C.D.I.
Charging system
Type A.C. magneto
Standard output 14 V, 320 W@ 5,000 r/min
Battery
Type GT12B-4
Voltage, capacity 12 V, 10 AH
Headlight typeQuartz bulb (halogen)
E_5eb_Spec.fm Page 3 Thursday, November 18, 1999 4:08 PM
INDEX
Pass switch ............................................. 3-9
Periodic maintenance and lubrication ...... 6-3
Pre-operation check list ........................... 4-1RRear brake pedal ................................... 3-12
Rear shock absorber adjustment ........... 3-19
Rear suspension lubrication................... 6-31
Rear wheel installation........................... 6-40
Rear wheel removal............................... 6-39
Recommended combinations of the
front fork and the rear shock
absorber settings................................. 3-22
Right view................................................ 2-2SSeats ..................................................... 3-15
Shifting .................................................... 5-4
Shift pedal ............................................. 3-11
Sidestand .............................................. 3-23
Sidestand/clutch switch operation
check .................................................. 3-24
Sidestand lubrication ............................. 6-31
Spark plug inspection .............................. 6-9
Specifications .......................................... 8-1
Starter (choke) “ ”.............................. 3-15
Starting a warm engine ............................ 5-3
Starting the engine .................................. 5-1
Start switch ............................................ 3-10
Steering inspection ................................ 6-32
Storage.................................................... 7-4
Storage compartment ............................ 3-17
Supporting the motorcycle ..................... 6-37
TTachometer............................................. 3-8
Tail/brake light bulb replacement ........... 6-36
Throttle cable and grip lubrication.......... 6-30
Throttle cable free play inspection ......... 6-21
Tips for reducing fuel consumption .......... 5-4
Tires...................................................... 6-21
Tool kit .................................................... 6-1
Troubleshooting .................................... 6-40
Troubleshooting chart ........................... 6-41
Turn indicator light................................... 3-2
Turn signal light bulb replacement ......... 6-36
Turn signal switch ................................. 3-10VValve clearance adjustment .................. 6-21
Vehicle identification number................... 9-1WWheel bearings ..................................... 6-33
Wheels .................................................. 6-24
E_5ebIX.fm Page 2 Thursday, November 18, 1999 4:09 PM
