2000 YAMAHA XJ600S clutch

L
2-3
DESCRIPTION
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-2.frame
Controls/Instruments (XJ600S)
14. Clutch lever (page 3-9)
15. Left handlebar switches (page 3-7)
16. Starter (choke) Ò Ó (page 3-14)
17. Speedometer (page 3-6)
18. Tachometer (page 3-7)
19. Right handlebar switches (page 3-9)
20. Front brake lever (page 3-10)
21. Throttle grip (page 6-12)
22. Main switch (page 3-1)

R
2-6
DESCRIPTION
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-2.frame
Controls/Instruments (XJ600N)
15. Clutch lever (page 3-9)
16. Left handlebar switches (page 3-7)
17. Starter (choke) Ò Ó (page 3-14)
18. Speedometer (page 3-6)
19. Tachometer (page 3-7)
20. Right handlebar switches (page 3-9)
21. Front brake lever (page 3-10)
22. Throttle grip (page 6-12)
23. Main switch (page 3-1)

R
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3TOC.-
Main switch ......................................................... 3-1
Steering lock (for XJ600N) ................................ 3-3
Indicator lights .................................................... 3-3
Oil level indicator circuit check ........................... 3-5
Speedometer (for XJ600S) ................................. 3-6
Speedometer (for XJ600N) ................................ 3-6
Tachometer ........................................................ 3-7
Handlebar switches ............................................ 3-7
Clutch lever ........................................................ 3-9
Shift pedal ........................................................ 3-10
Front brake lever .............................................. 3-10
Rear brake pedal .............................................. 3-11Fuel tank cap .................................................... 3-11
Fuel ................................................................... 3-12
Fuel tank breather hose (for Germany only) ..... 3-12
Fuel cock........................................................... 3-13
Starter (choke) Ò Ó ......................................... 3-14
Seat................................................................... 3-14
Helmet holders .................................................. 3-15
Storage compartment ....................................... 3-15
Rear shock absorber adjustment ...................... 3-15
Luggage strap holders ...................................... 3-16
Sidestand .......................................................... 3-17
Sidestand/clutch switch operation check .......... 3-17

L
3-5
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3.frame
EAU00071
Oil level indicator circuit check
Turn the main switch to ÒONÓ and
the engine stop switch to Ò Ó.
Oil level indicator light
does not come on.Oil level indicator light
comes on.
Check engine oil level.
Oil level indicator light
comes on.Oil level indicator light
does not come on.
Engine oil level and
electrical circuit are OK.
Go ahead with riding.
Put the transmission in neutral
or apply the clutch lever, then
push the start switch.
Oil level
is OK.
Supply
engine oil.
Oil level
is low.
Ask a Yamaha dealer to
inspect electrical circuit.

L
3-9
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3.frame
1. Engine stop switch
2. Lights switch
3. Start switch Ò Ó
EAU00138
Engine stop switch
The engine stop switch is a safety de-
vice for use in an emergency such as
when the motorcycle overturns or if
trouble occurs in the throttle system.
Turn the switch to Ò Ó to start the en-
gine. In case of emergency, turn the
switch to Ò Ó to stop the engine.
EAU00134
Lights switch
Turning the light switch to Ò Ó,
turns on the auxiliary light, meter lights
and taillight. Turning the light switch to
Ò Ó, turns the headlight on also.
EAU00143
Start switch Ò Ó
The starter motor cranks the engine
when pushing the start switch.
EC000005
CAUTION:
See starting instructions prior to
starting the engine.
1. Clutch lever
EAU00152
Clutch lever
The clutch lever is located on the left
handlebar, and the ignition circuit cut-
off system is incorporated in the clutch
lever holder. Pull the clutch lever to the
handlebar to disengage the clutch, and
release the lever to engage the clutch.
The lever should be pulled rapidly and
released slowly for smooth clutch oper-
ation. (Refer to the engine starting pro-
cedures for a description of the ignition
circuit cut-off system.)

R
3-10
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3.frame
1. Shift pedal
EAU00157
Shift pedal
This motorcycle is equipped with a con-
stant-mesh 6-speed transmission.
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch when shifting.
1. Front brake lever
2. Position adjusting nut
EAU00160
Front brake lever
The front brake lever is located on the
right handlebar and is equipped with a
position adjuster. To activate the front
brake, pull the lever toward the handle-
bar.
1. Position adjusting nut
2. Proper position
To adjust the front brake lever position,
turn the adjusting nut while pulling the
lever forward. Make sure the mark Ò Ó
on the adjusting nut is aligned with the
mark Ò Ó on the lever.

L
3-17
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3.frame
EAU00330
Sidestand
This model is equipped with an ignition
circuit cut-off system. The motorcycle
must not be ridden when the sidestand
is down. The sidestand is located on
the left side of the frame. (Refer to
page 5-1 for an explanation of this sys-
tem.)
EW000044
This motorcycle must not be operat-
ed with the sidestand in the down
position. If the stand is not properly
retracted, it could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Yamaha has designed into this mo-
torcycle a lockout system to assist
the operator in fulfilling the respon-
sibility of retracting the sidestand.
Please check carefully the operating
instructions listed below and if there
is any indication of a malfunction,
return the motorcycle to a Yamaha
dealer immediately for repair.
EAU00332
Sidestand/clutch switch
operation check
Check the operation of the sidestand
switch and clutch switch against the in-
formation below.
EW000046
lBe sure to use the centerstand
during this inspection.
lIf improper operation is noted,
consult a Yamaha dealer.
TURN MAIN SWITCH TO ÒONÓ AND
ENGINE STOP SWITCH TO Ò Ó.
TRANSMISSION IS IN GEAR AND
SIDESTAND IS UP.
PULL IN CLUTCH LEVER AND
PUSH START SWITCH.
ENGINE WILL START.
SIDESTAND IS DOWN.
ENGINE WILL STALL.
SIDESTAND SWITCH IS OK.
CLUTCH SWITCH IS OK.

L
4-1
PRE-OPERATION CHECKS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-4.frame
Owners are personally responsible for their vehicleÕs condition. Your motorcycleÕs vital functions can start to deteriorate
quickly and unexpectedly, even if it remains unused (for instance, if it is exposed to the elements). Any damage, fluid leak or
loss of tire pressure could have serious consequences. Therefore, it is very important that, in addition to a thorough visual in-
spection, you check the following points before each ride.
EAU00340
PRE-OPERATION CHECK LIST
ITEM CHECKS PAGE
Front brake
¥ Check operation, fluid level and fluid leakage.
¥ Fill with DOT 4 (or DOT 3) brake fluid if necessary.6-18 ~ 6-20
Rear brake6-17 ~ 6-20
Clutch¥ Check operation, condition and free play.
¥ Adjust if necessary.6-15 ~ 6-16
Throttle grip and housing¥ Check for smooth operation.
¥ Lubricate if necessary.6-12, 6-22
Engine oil¥ Check oil level.
¥ Fill with oil if necessary.6-7 ~ 6-9
Drive chain¥ Check chain slack and condition.
¥ Adjust if necessary.6-20 ~ 6-21
Wheels and tires¥ Check tire pressure, wear and damage.6-13 ~ 6-15,
6-31 ~ 6-34
Control and meter cables¥ Check for smooth operation.
¥ Lubricate if necessary.6-22
Brake and shift pedal
shafts¥ Check for smooth operation.
¥ Lubricate if necessary.6-22
Brake and clutch lever
pivots¥ Check for smooth operation.
¥ Lubricate if necessary.6-23
Center and sidestand
pivots¥ Check for smooth operation.
¥ Lubricate if necessary.6-23
EAU01114