7-5
MOTORCYCLE CARE AND STORAGE
1
2
3
4
5
6
7
8
97. Check and, if necessary, cor-
rect the tire air pressure, then
raise the motorcycle so that
both of its wheels are off the
ground. Alternatively, turn the
wheels a little every month in
order to prevent the tires from
becoming degraded in one
spot.
8. Cover up the muffler outlet
with a plastic bag to prevent
moisture from entering.
9. Remove the battery and fully
charge it. Store it in a cool, dry
place and recharge it once a
month. Do not store the bat-
tery in an excessively cold or
warm place (less than 0°C or
more than 30°C). For more
information, see “Battery stor-
age” in the chapter “PERIODIC
MAINTENANCE AND MINOR
REPAIRS”.
NOTE:
Make any necessary repairs before
storing the motorcycle.
5EK-9-E1 (TW125)<3.1> 4/6/0 11:50 PM Page 74
8-3
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
Front150 kPa (1.50 kg/cm2, 1.50 bar)
Rear150 kPa (1.50 kg/cm2, 1.50 bar)
80 kg load ~ Maximum
load*
Front
150 kPa (1.50 kg/cm2, 1.50 bar)
Rear175 kPa (1.75 kg/cm2, 1.75 bar)
Off-road riding
Front
125 kPa (1.25 kg/cm2, 1.25 bar)
Rear125 kPa (1.25 kg/cm2, 1.25 bar)
*Load is total weight of cargo, rider, passenger and accessories.
Wheels
Front
Type Spoke wheel
Size 2.50 ´18
Rear
Type Spoke wheel
Size 14M/C ´MT4.50
Brakes
Front
Type Single disc brake
Operation Right hand operation
Fluid DOT 3 or DOT 4Rear
Type Drum brake
Operation Right foot operation
Suspension
Front
Type Telescopic fork
Rear
Type Swingarm (Monocross
suspension)
Shock absorber
Front Coil spring/oil damper
Rear Coil-gas spring/oil damper
Wheel travel
Front 160 mm
Rear 150 mm
Electrical
Ignition system C.D.I.
Charging system
Type C.D.I. magneto
Standard output 12 V, 11 A @ 5,000 rpm
Battery
Type GM7CZ-3D
Voltage, capacity 12 V, 7 AH
5EK-9-E1 (TW125)<3.1> 4/6/0 11:50 PM Page 77
