Page 129 of 235
L/C 100_U151
2000 L/C 100 (OM60866U)
2. Unscrew the screws on both sides
and remove the stay.3. Remove Velcro loop on the stay. Re-move the paper strip covering the
adhesive on back side of Velcro loop
and adhere it just behind the button
to back side of the transmitter near
center.Please note if the transmitter has wire clip
for sun visor, this clip must be removed
prior to adhesion of the Velcro.
Page 130 of 235
L/C 100_U
152 2000 L/C 100 (OM60866U)
4. Install the transmitter on the center
of the stay with Velcro.5. Remove the cover on the opening onthe lid.6. Reinstall the stay and secure it withthe screws. Before fixing it with the
screws, adjust the position of the
transmitter as it can be operated
through the opening on the lid.
Make sure the transmitter can be operated
properly.
Page 131 of 235
L/C 100_U153
2000 L/C 100 (OM60866U)
7. Close the lid securely.
Make sure the lid is closed securely.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the garage door opener
box closed while driving.
Auxiliary boxes—
To use the auxiliary bo xes, open the
lids as shown in the following illustra-
tions.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the auxiliary box closed
while driving.
NOTICE
Auxiliary boxes on the ceiling—In hot
weather, inside of the vehicle ceiling
becomes very hot. Do not leave any-
thing flammable or deformable such
as a lighter, the glasses, etc. inside.Type A (luggage compartment)
Type B (luggage compartment)
Page 132 of 235
L/C 100_U
154 2000 L/C 100 (OM60866U)
Type C (luggage compartment)
Type D (luggage compartment)
Type E (rear console)
Type F (front ceiling)
Type G (front ceiling)
Type H (front ceiling)
Page 133 of 235
L/C 100_U155
2000 L/C 100 (OM60866U)
—First
−aid kit holder
Type A auxiliary box
Type B auxiliary box Types A and B auxiliary boxes are
equipped with a band or strap to hold
the first
−aid kit.
Although the first −aid kit itself is not in-
cluded as an original equipment, this aux-
iliary box can be used to store the first −
aid kit.
Ty p e A —
Hold the first −aid kit with a strap.
1. To loosen: Pull the buckle forward.
2. To tighten: Pull on the belt.
Ty p e B —
Hold the first −aid kit with a band.
Make sure the first −aid kit is securely
held. —Warning reflector holder
Type C auxiliary box
Type D auxiliary box
Page 134 of 235

L/C 100_U
156 2000 L/C 100 (OM60866U)
Types C and D auxiliary boxes are
equipped with a band or straps to hold
the warning reflector.
Although the warning reflector itself is not
included as an original equipment, this
auxiliary box can be used to store the
warning reflector.
Ty p e C —
Hold the warning reflector kit with the
straps.
1. To loosen: Pull the buckle forward.
2. To tighten: Pull on the belt.
Ty p e D —
Hold the warning reflector with a band.
Make sure the warning reflector is secure-
ly held.
Cup holders
The cup holder is designed for holding
cups or drink
−cans securely in its
holes. To use them, observe the follow-
ing illustrations.
CAUTION
Do not place anything else other
than cups or drink −cans on the cup
holder, as such items may be
thrown about and possibly injure
people in the vehicle during a sud-
den braking or an accident.
To reduce the chance of injury in
case of an accident or a sudden
stop while driving, keep the cup
holder closed when it is not in use.
For front seats
The cup holder can be adjustable to the
size of cups by changing the separator
position or moving the separator arms.
You can use it as an accessory box by
removing the separator inside.
Page 135 of 235
L/C 100_U157
2000 L/C 100 (OM60866U)
For second seats
For third seats (right −hand side −type a)
For third seats (right −hand side −type b)
For third seats (left −hand side) Tie
−down hooks
To secure your luggage, use the tie −
down hooks as shown above.
See ”Luggage stowage precautions” in
Section 2 for precautions in loading lug- gage.
NOTICE
Do not use the seat anchors instead
of the tie −down hooks.
Page 136 of 235
L/C 100_U
158 2000 L/C 100 (OM60866U)
Luggage cover
Ty p e A
Ty p e B
To use the luggage cover, pull it out of
the retractor and hook it on the an-
chors.
To remove the luggage cover, lift it up.
After you remove the luggage cover, place
it somewhere other than the passenger
compartment. This will prevent passengers
from injury in the event of a sudden stop
or an accident.