2000 SUBARU FORESTER change time

1-8
Keyless entry system (if equipped)
CAUTION
Do not expose the transmitter to severe shocks, such as those
experienced as a result of dropping or throwing. Do not take the transmitter apart except when replacing the
battery. Do not get the transmitter wet. If it gets wet, wipe it dry with a
cloth immediately. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user ’s authority to
operate the equipment.
The keyless entry system has the following func tion s.
Loc king and unloc king the d oors and rear g ate witho ut a key
Arming and d isarming the sec urity system (if your v ehic le is eq uip p ed
with an op tional sec urity system). See the next sec tion “Sec urity system
(if eq uip p ed ) ” for d etailed information.
The rec eiver insid e your vehic le ’s keyless entry system and the remote
c ontrol transmitters are d esig ned tog ether to have an averag e op erating
rang e of 25 to 50 feet (8 to 15 meters) d uring id ea l c ond itions. Althoug h
at times you may exp erienc e rang e g reater than that , there may b e oc c a-
sions when rang e is less than normal. Atmosp heric c ond itions or interfer-
enc e from other RF-emitting d evic es c an effec tively red uc e transmitter
rang e.

Doors and locks1-11
–
CONTINUED –
This ind ic ates that the system is in the Transmitte
r Prog ramming
Mod e. Do not release the Programming button.
4. Press the “LOCK ” b utton on the new transmitter. The d oor loc ks will
c yc le onc e.
5. Rep eat step 4 for any ad d itional transmitters.
6. Exit the Transmitter Prog ram Mod e b y releasing th e Prog ramming
b utton and turning the vehic le ig nition off. Test a ll remote transmitters
to ensure that they work p rop erly. n To delete a lost or stolen transmitter
1. Follow step 1 to 3 as d esc rib ed ab ove.
2. Re-p rog ram the remaining transmitters as d esc rib e d in step 4.
If there is only one remaining transmitter, p erform step 4 four
times .
If there are two remaining transmitters, p erform st ep 4 twice for
eac h transmitter. System maintenance
Your keyless entry system d oes not req uire any sp ec ific maintenanc e
exc ep t for oc c asionally c hang ing the transmitter b a ttery. The 12-volt
b attery in the remote transmitter should last ap p ro ximately one year,
d ep end ing on usag e. When the b attery b eg ins to weak en, you will
notic e a d ec rease in rang e, or the d istanc e from yo ur vehic le that the
remote transmitter will op erate. n To change the remote transmitter battery CAUTION
Do not let dust, oil or water get on or in the transmitter when
replacing the battery.

2-20
Seatbelt maintenance
CAUTION
Keep the belts free of polishes, oils, chemicals and particularly
battery acid. Never attempt to make modifications or changes that will pre-
vent the seatbelt from operating properly.
To c lean the seatb elts, use a mild soap and lukewar m water. Never
b leac h or d ye the b elts b ec ause this c ould seriousl y affec t their streng th.
Insp ec t the seatb elts and attac hments inc lud ing the web b ing and all
hard ware p eriod ic ally for c rac ks, c uts, g ashes, tea rs, d amag e, loose
b olts or worn areas. Rep lac e the seatb elts even if only minor d amag e is
found .
Child restraint systems
WARNING
Never let a passenger hold a child on his or her lap while the
vehicle is moving. The passenger cannot protect the child from injury in a collision, because the child will be caught between the
passenger and objects inside the vehicle. Additionally, holding achild in your lap or arms in the front seat exposes that child to
another serious danger. Since the SRS airbag deploys with con-
siderable speed and force, the child could be injured or evenkilled. Put children aged 12 and under in the rear seat properly re-
strained at all times. The SRS airbag deploys with considerablespeed and force and can injure or even kill children, especially ifthey are 12 years of age and under and are not restrained or im-properly restrained. Because children are lighter and weaker than
adults, their risk of being injured from deployment is greater.For that reason, be sure to secure ALL types of child restraint
devices (including forward facing child seats) in the REAR seats

Interior equipment6-15
–
CONTINUED –
Range
: 21.26 to 30.86 inHg or 720 to 1045 hp a
NOTE The reading may change during air-conditioner operation,
door window operation, driving in a tunnel, and so forth. All barometric readings reported in local weather reports are
corrected to a sea-level reading regardless of altitude. The Gauge
Pack displays true local air pressure and hence may differ signifi-cantly from local weather reports (especially at higher altitudes).The barometer is not adjustable. Since air pressure changes with altitude, the barometric read-
ing will vary when the vehicle is moving up or down an incline.For accurate barometric trending, the vehicle should be station-
ary. Altimeter
The altimeter has two mod es, Stand ard elevation mod e and Relative
elevation mod e.
HS6013BB

6-16
HS6014BB
nStandard elevation mode
The “MODE ” switc h c hang es the b arometer to the stand ard eleva tion
mod e of the altimeter.
The altimeter ind ic ates the “sea level ” elevation.
Range : –660 to 9200 ft ( –200 to 2800 m) at a p itc h of 20 ft or 10 m in
metric measurement units.Adjustment : In ord er to g et a p rec ise elevation, manually c or rec t the
altimeter when the c urrent elevation is known.
“ SET ”: 20 ft inc rease or 10 m inc rease in metric measure ment units.
“ ”: 20 ft d ec rease or 10 m d ec rease in metric measure ment units.
NOTE The indication may change during air-conditioner operation,
window operation, driving in a tunnel, and so forth. Adjustable elevation is 780 ft ( 300 m).
To cancel the adjustment and return to the default altimeter
reading, press the “ SET” and “ ” switch together for 1 second
or more.