2000 SUBARU FORESTER wheel

7-58sig nal lever is op erated .
–
the safety c hains are c onnec ted p rop erly.
– all c arg o in the trailer is sec ured safety in p osit ion.
– the sid e mirrors p rovid e a g ood rearward field of v iew without a
sig nific ant b lind sp ot.
Suffic ient time should b e taken to learn the “feel ” of the vehic le/
trailer c omb ination b efore starting out on a trip . In an area free of traf-
fic , p rac tic e turning , stop p ing and b ac king up . n Driving with a trailer
You should allow for c onsid erab ly more stop p ing d is tanc e when
towing a trailer. Avoid sud d en b raking b ec ause it m ay result in skid -
d ing or jac kknifing and loss of c ontrol. Avoid ab rup t starts and sud d en ac c elerations. If yo ur vehic le has a
manual transmission, always start out in first g ear and release the
c lutc h at mod erate eng ine RPM. Avoid uneven steering , sharp turns and rap id lane c hang es.
Slow d own b efore turning . Make a long er than normal turning
rad ius b ec ause the trailer wheels will b e c loser th an the vehic le
wheels to the insid e of the turn. In a tig ht turn, the trailer c ould hit your
vehic le. Crosswind s will ad versely affec t the hand ling of yo ur vehic le and
trailer, c ausing sway. Crosswind s c an b e d ue to wea ther c ond itions or
the p assing of larg e truc ks or b uses. If swaying oc c urs, firmly g rip the
steering wheel and slow d own immed iately b ut g rad ua lly.
When p assing other vehic les, c onsid erab le d istanc e is req uired
b ec ause of the ad d ed weig ht and leng th c aused b y at tac hing the
trailer to your vehic le. When b ac king up with a trailer, never ac c elerate or steer rap id ly.
When turning b ac k, g rip the b ottom of the steering wheel with one
hand and turn it to the left for a left turn, and t urn it to the rig ht for a
rig ht turn.

7-60n
Parking on a grade
Always b loc k the wheels und er b oth vehic le and trai ler when p arking .
Ap p ly the p arking b rake firmly. You should not p ark on a hill or slop e.
But if p arking on a hill or slop e c annot b e avoid ed , you should take
the following step s:
1. Ap p ly the b rakes and hold the p ed al d own.
2. Have someone p lac e wheel b loc ks und er b oth the ve hic le and
trailer wheels.
3. When the wheel b loc ks are in p lac e, release the r eg ular b rakes
slowly until the b loc ks ab sorb the load .
4. Ap p ly the reg ular b rakes and then ap p ly the p arki ng b rake; slowly
release the reg ular b rakes.
5. Shift into 1st or reverse g ear (manual transmissi on) or “P ” (auto-
matic transmission) and shut off the eng ine.

8-6
Flat tires
WARNING
Do not jack up the vehicle on an incline or a loose road sur-
face. The jack can come out of the jacking point or sink into the ground and this can result in a severe accident. Use only the jack provided with your vehicle. The jack sup-
plied with the vehicle is designed only for changing a tire. Neverget under the vehicle while supporting the vehicle with this jack. Always turn the engine off before raising the flat tire off the
ground using the jack. Never swing or push the vehicle sup-ported with the jack. The jack can come out of the jacking pointdue to a jolt and this can result in a severe accident. Do not use oil or grease on the wheel studs or nuts when the
spare tire is installed. This could cause the nuts to become looseand lead to an accident. Never place a tire or tire changing tools in the passenger
compartment after changing wheels. In a sudden stop or colli-
sions, loose equipment could strike occupants and cause injury.Store the tire and all tools in the proper place.
If you have a flat tire while d riving , never b rake sud d enly; keep d riving
straig ht ahead while g rad ually red uc ing sp eed . Then slowly p ull off the
road to a safe p lac e.
1. Park on a hard , level surfac e, whenever p ossib le, then stop the eng ine.
2. Set the p arking b rake sec urely and shift a manual transmission ve-
hic le in reverse or an automatic transmission vehic le in the “P ” (Park)
p osition.
3. Turn on the hazard warning flasher and have every one g et out of the
vehic le.

In case of emergency8-7
–
CONTINUED –
4. Put wheel b loc ks at the front and rear of the tir
e d iag onally op p osite
the flat tire.
HS0148
Jacking position
Wheel blocks
5. Take out the sp are tire, jac k, and wheel nut wren c h. See the “Tire
c hang ing tools ” in this c hap ter.
6. Loosen the wheel nuts using the wheel nut wrenc h b ut d o not remove
the nuts.
HS0149
7. Plac e the jac k und er the sid e sill at the front o r rear jac k-up p oint c los-
est to the flat tire.
Turn the jac ksc rew b y hand until the jac k head eng a g es firmly into the
jac k-up p oint.

8-8
HS0150
8. Insert the jac k hand le into the jac ksc rew, and turn the hand le c loc k-
wise until the tire c lears the g round . Do not raise the vehic le hig her than
nec essary.
HS0151
9. Remove the wheel nuts and the flat tire.
10. Before p utting the sp are tire on, c lean the moun ting surfac e of the
wheel and hub with a c loth.

In case of emergency8-9
–
CONTINUED –
HG0104
OM-H0172
11. Put on the sp are tire. Rep lac e the wheel nuts. T ig hten them b y hand .
12. Turn the jac k hand le c ounterc loc kwise to lower t he vehic le.
13. Use the wheel nut wrenc h to sec urely tig hten the wheel nuts to the
sp ec ified torq ue, following the tig htening ord er in the illustration.
HS0152
14
2
53
The torq ue for tig htening the nuts is 58 to 72 ft-l b (78 to 98 N-m, 8 to 10
kg -m). This torq ue is eq uivalent to ap p lying ab out 88 to 110 lb s (40 to 50
kg ) at the top of the wheel nut wrenc h. Never use y our foot on the wheel
nut wrenc h or a p ip e extension on the wrenc h b ec aus e you may exc eed
the sp ec ified torq ue. Have the wheel nut torq ue c he c ked at the nearest
automotive servic e fac ility.
14. Store the flat tire in the sp are tire c omp artmen t.

8-10
HS0153
Flat tireAttaching bolt
Spacer
Also store the jac k and wheel nut wrenc h in their s torag e loc ations. See
“ Tire c hang ing tools ” in this sec tion.
Tire changing tools
HS0004Spare tire
Jack handle
Jack

8-12Towing
If towing is nec essary, it is b est d one b y your SUB
ARU d ealer or a c om-
merc ial towing servic e. Ob serve the following p roc e d ures for safety.
Transporting your vehicle using a flat-bed truck
HS0161
This is the b est way to transp ort your vehic le. Use the following p roc e-
d ures to ensure safe transp ortation.
1. Shift the selec tor lever into the “P ” p osition for automatic transmis-
sion vehic les or “1st ” for manual transmission vehic les.
2. Pull up the p arking b rake lever firmly.
3. Sec ure the vehic le onto the c arrier p rop erly with safety c hains.
Eac h safety c hain should b e eq ually tig htened and c are must b e tak-
en not to p ull the c hains so tig htly that the susp e nsion b ottoms out.
Towing with the front wheels raised off the ground
WARNING
Never tow AWD vehicles (both AT and MT) with the front wheels raised off the ground while the rear wheels are on the ground, orwith the rear wheels raised off the ground while the front wheelsare on the ground. This will cause the vehicle to spin away due tothe operation or deterioration of the center differential.