2000 SUBARU FORESTER light

6-28Cargo anchorage eyelets
CAUTION
The cargo anchorage eyelets are designed only for securing light cargo. Never try to secure any cargo which weighs more than theload capacity of the anchorage eyelets. The maximum load ca-pacity is about 44 lb. (20 kg) per eyelet.
HS0115
The c arg o area is eq uip p ed with four anc horag e eyel ets so that c arg o
c an b e sec ured with a c arg o net or rop es.
When using the anc horag e eyelets, raise them up . Wh en not in use,
lower the eyelets d own.

Starting and operating7-35
–
CONTINUED –
leave ample distance from other vehicles.
When you feel the ABS system operating, you should maintain
constant brake pedal pressure. Do not pump the brake pedal
since doing so may defeat the operation of the ABS system.
The ABS system p revents the loc k-up of wheels whic h may oc c ur d uring
sud d en b raking or b raking on slip p ery road surfac es . This help s p revent
the loss of steering c ontrol and d irec tional stab il ity c aused b y wheel
loc k-up .
When the ABS system is op erating , you may hear a c h attering noise or
feel a slig ht vib ration in the b rake p ed al. This is normal when the ABS
op erates.
The ABS system will not op erate when the vehic le sp eed is b elow
ap p roximately 6 mp h (10 km/h).
ABS system self-checking
You may feel a slig ht shoc k in the b rake p ed al and hear the op erating
sound of ABS from the eng ine c omp artment just after the vehic le is
started . This is c aused b y an automatic func tional test of the ABS sys-
tem b eing c arried out and d oes not ind ic ate any ab n ormal c ond ition.
ABS warning light
HS0156
The ABS warning lig ht c omes on when the ig nition sw itc h is turned to
the “ON ” p osition and g oes out after ab out two sec ond s.
This is an ind ic ation that the ABS system is workin g p rop erly.

7-36If the warning lig ht b ehaves as follows, the ABS sy
stem may not b e
working p rop erly. The warning lig ht d oes not c ome on when the ig nitio n switc h is
turned to the “ON ” p osition.
The warning lig ht c omes on when the ig nition switc h is turned to
the “ON ” p osition, b ut it d oes not g o out even when the veh ic le sp eed
exc eed s ap p roximately 8mp h (12km/h). The warning lig ht c omes on d uring d riving .
When the warning lig ht is on, the ABS func tion shut s d own; however,
the c onventional b rake system c ontinues to op erate normally. If this
oc c urs, have the ABS system rep aired at the first a vailab le op p ortuni-
ty b y your SUBARU d ealer. NOTE
If the warning light behavior is as described below, the ABS sys- tem may be considered normal. The warning light comes on right after the engine is started
but goes out immediately, remaining off. The warning light remains on after the engine has been
started, but it goes out when the vehicle speed reaches about 8mph (12 km/h). The warning light comes on during driving, but it goes out
immediately and remains off.
When d riving with an insuffic ient b attery voltag e s uc h as when the en-
g ine is jump started , the ABS warning lig ht may c om e on. This is d ue
to the low b attery voltag e and d oes not ind ic ate a malfunc tion. When
the b attery b ec omes fully c harg ed , the lig ht will g o out.

7-56c ient slac k in the c hains taking tig ht-turn situati
ons into ac c ount; how-
ever, b e c areful not to let them d rag on the g round .
For more information ab out the safety c hain c onnec t ion, refer to the
instruc tions for your hitc h and trailer. n Side mirrors
After hitc hing a trailer to your vehic le, c hec k tha t the stand ard sid e
mirrors p rovid e a g ood rearward field of view witho ut sig nific ant b lind
sp ots. If sig nific ant b lind sp ots oc c ur with the ve hic le’s stand ard sid e
mirrors, use towing mirrors that c onform with Fed er al, state/p rovinc e
and /or other ap p lic ab le reg ulations.
HS0146
n Trailer lights CAUTION
Direct splicing or other improper connection of trailer lights may
damage your vehicle ’s electrical system and cause a malfunction
of your vehicle ’s lighting system.
Connec tion of trailer lig hts to your vehic le ’s elec tric al system req uires
mod ific ations to the vehic le ’s lig hting c irc uit to inc rease its c ap ac ity
and ac c ommod ate wiring c hang es. To ensure the trail er lig hts are
c onnec ted p rop erly, p lease c onsult your SUBARU d eal er. Chec k for
p rop er op eration of the turn sig nals and the b rake lig hts and p arking
lig hts eac h time you hitc h up .

8-4If battery fluid is accidentally swallowed, immediately drink a
large amount of milk or water, and obtain immediate medicalhelp.
Keep everyone including children away from the battery.
The gas generated by a battery explodes if a flame or spark is
brought near it. Do not smoke or light a match while jump start-ing. Never attempt jump starting if the discharged battery is frozen.
It could cause the battery to burst or explode. Whenever working on or around a battery, always wear suit-
able eye protectors, and remove metal objects such as rings,
bands or other metal jewelry. Be sure the jumper cables and clamps on them do not have
loose or missing insulation.Do not jump start unless cables in suitable condition are avail-able. A running engine can be dangerous. Keep your fingers, hands,
clothing, hair and tools away from the cooling fan, belts and anyother moving engine parts. Removing rings, watches and ties isadvisable.
When your vehic le d oes not start d ue to a run d own (d isc harg ed ) b at-
tery, the vehic le may b e jump started b y c onnec ting your b attery to
another b attery (c alled the b ooster b attery) with j ump er c ab les.
Jump starting is d ang erous if it d one inc orrec tly. If you are unsure ab out
the p rop er p roc ed ure for jump starting , c onsult a c omp etent mec hanic .
How to jump start
1. Make sure the b ooster b attery is 12 volts and the neg ative terminal
is g round ed .
2. If the b ooster b attery is in another vehic le, d o not let the two ve-
hic les touc h.
3. Turn off all unnec essary lig hts and ac c essories.
4. Connec t the jump er c ab les exac tly in the seq uenc e illustrated .

9
Appearance care Exterior care9-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing 9-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Waxing and polishing 9-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corrosion protection 9-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the interior 9-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning aluminum wheels 9-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning fog light lens 9-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9-2
Exterior care
Washing
CAUTION
When washing the vehicle, the brakes may get wet. As a result,
the brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly pressing the brakepedal to heat up the brakes. Do not wash the engine compartment and areas adjacent to it.
If water enters the engine air intake, electrical parts or the power
steering fluid reservoir, it will cause engine trouble or faulty pow-
er steering respectively.
The b est way to p reserve your vehic le ’s b eauty is freq uent washing .
Wash the vehic le at least onc e a month to avoid c on tamination b y road
g rime.
Wash d irt off with a wet sp ong e and p lenty of lukew arm or c old water. Do
not wash the vehic le with hot water and in d irec t s unlig ht.
Salt, c hemic als, insec ts, tar, soot and b ird d rop p i ng s should b e washed
off b y using a lig ht d eterg ent, as req uired . If you use a lig ht d eterg ent,
make c ertain that it is a neutral d eterg ent. Do not use strong soap or
c hemic al d eterg ents. All c leaning ag ents should b e p romp tly flushed
from the surfac e and not allowed to d ry there. Rins e the vehic le thor-
oug hly with p lenty of lukewarm water. Wip e the rema ining water off with a
c hamois or soft c loth.
Washing the underbody
Chemic als, salts and g ravel used for d eic ing road s urfac es are ex-
tremely c orrosive, ac c elerating the c orrosion of un d erb od y c omp o-
nents, suc h as the exhaust system, fuel and b rake l ines, b rake
c ab les, floor p an and fend ers, and susp ension.
Thoroug hly flush the und erb od y and insid e of the fe nd ers with luke-
warm or c old water at freq uent intervals to red uc e the harmful effec ts
of suc h ag ents.

9-6
Synthetic leather upholstery
The synthetic leather material used on the SUBARU m ay b e c leaned
using mild soap or d eterg ent and water, after first vac uuming or
b rushing away loose d irt. Allow the soap to soak in for a few minutes
and wip e off with a c lean, d amp c loth. Commerc ial f oam-typ e c lean-
ers suitab le for synthetic leather materials may b e used when nec es-
sary. NOTE Strong cleaning agents such as solvents, paint thinners, window
cleaner or gasoline must never be used on leather or syntheticinterior materials.
Cleaning aluminum wheels Promp tly wip e the aluminum wheels c lean of any kind of g rime or
ag ent. If d irt is left on too long , it may b e d iffi c ult to c lean off.
Do not use soap c ontaining g rit to c lean the wheels . Be sure to use a
neutral c leaning ag ent, and later rinse thoroug hly with water. Do not
c lean the wheels with a stiff b rush or exp ose them to a hig h-sp eed wash-
ing d evic e. Clean the vehic le (inc lud ing the aluminum wheels) w ith water as soon
as p ossib le when it has b een sp lashed with sea wate r, exp osed to sea
b reezes, or d riven on road s treated with salt or ot her ag ents.
Cleaning fog light lens
If the fog lig ht p rotec tor oug ht to b e removed for c leaning the fog lig ht
lens, follow then the instruc tion g iven in “Fog lig ht ” sec tion (Rep lac ing
b ulb s) und er Chap ter 10.
When c leaning the fog lig ht lens, p ark the vehic le on a safe p lac e, stop
the eng ine and c onfirm that the fog lig ht lens is n ot hot b efore p roc eed -
ing with the work.