FOR EMERGENCIES
8–11
N24A206a
7. Place the spare wheel and then install
the wheel nuts with the tapered ends
facing inward, then tighten by hand
until the wheel is no longer loose.
NOTE
(1)Flange nuts (2) can be temporarily
used on the steel wheel, but return to
the original wheel and tyre as soon as
possible.
(2)If all four wheels on vehicles with
flange nuts (2) are changed to steel
wheels, use tapered nuts (1).
CAUTION
Never apply oil to either wheel bolts or
nuts as it will cause them to over-
tighten.
N24A014a
8. Lower the vehicle slowly and then
tighten the nuts diagonally in two or
three steps until each nut has been
tightened to the specified torque.
Tightening torque:
98 to 117 Nm
(Achieved by applying force of
approx. 390 to 450N at end of
wheel nut wrench supplied with
vehicle)
CAUTION
Never use extra force with your foot
on the wheel nut wrench or by using
a pipe extension as you can over-
tighten the nut.
9. Lower and remove the jack and stow
the jack, bar, wheel nut wrench and flat
tyre wheel. Have the flat tyre repaired
as soon as possible.
SPECIFICATIONS
10–10
EngineEP01EMDb
Petrol-powered vehicleDiesel-powered vehicleItem130016001800 (GDI)Medium performanceHigh performance130016001800 (GDI)penginegpengine
Engine typeFour-cylinder, in line water-cooled, four-cycle
single overhead camshaftFour-cylinder, in line water-
cooled, four-cycle double
overhead camshaftFour-cylinder, in line water-cooled, four-cycle
single overhead camshaft
Engine model
Total displacement
Bore
Stroke
Compression ratio4G13
1,299 cc
71.0 mm
82.0 mm
10:14G92
1,597 cc
81.0 mm
77.5 mm
10:14G93
1,834 cc
81.0 mm
89.0 mm
12:1Medium performance engine: F9Q1
High performance engine: F9Q2
1,870 cc
80.0 mm
93.0 mm
19:1
Valve clearanceIntakeAutomatically adjusted0.20 mmValve clearanceExhaustAutomatically adjusted0.40 mm
Firing order1-3-4-2
Maximum output60 kW/5 000 r/min76 kW/6 000 r/minM/T90 kW/5,500 r/min75 kW/4 000 r/min85 kW/4 000 r/minMaximum output60 kW/5,000 r/min76 kW/6,000 r/minA/T92 kW/5,500 r/min75 kW/4,000 r/min85 kW/4,000 r/min
Maximum torque120 Nm/4,000 r/min141 Nm/4,500 r/min174 Nm/3,750 r/min215 Nm/3,250 r/min265 Nm/2,500 r/min
TransmissionEP01FMDa
Petrol-powered vehicleDiesel-poweredItem130016001800 (GDI)pvehicle
M/TM/TA/TM/TA/TM/T
Gear ratio
1st
2nd
3rd
4th
5th
Reverse3.727
2.047
1.321
0.966
0.794
3.5453.363
1.863
1.321
0.966
0.794
3.5452.842
1.529
1.000
0.712
–
2.4803.583
1.947
1.266
0.970
0.767
3.3632.842
1.529
1.000
0.712
–
2.4803.384
1.904
1.193
0.868
0.652
3.297
