2000 MITSUBISHI CARISMA audio

overview–Instruments and Controls
EB21AMFf
1-Combination headlamps, dipper and turn signal
switch
p. 4–12
Headlamp washer switch*
p. 4–17
2-Supplemental restraint system (for driver’s seat)

p. 3–22
Horn switch
p. 4–223-Meter and gauges
p. 4–2
4- Windscreen wiper and washer switch
p. 4–15
Rear window wiper and washer switch (Hatchback
only)
p. 4–16
5-Ventilators
p. 6–29
6-Multi centre display
p. 4–24
Digital clock
p. 4–26
7-Hazard warning flasher switch
p. 4–18
8-Supplemental restraint system (for passenger’s seat)

p. 3–22
9-Front fog lamp switch*
p. 4–20
10 - Headlamp levelling switch
p. 4–13
11-Rheostat* (meter illumination control)
p. 4–21
12 - Rear fog lamp switch
p. 4–21
13 - Electric remote-controlled outside rear-view mirrors
switch*
p. 5–32
14 - Bonnet release lever
p. 2–8
15 - Auto-speed (cruise) control lever*
p. 5–36
16 - Ignition switch
p. 5–9
17 - Gearshift or selector lever
p. 5–14, 5–16
18 - A/T mode change over switch (vehicle with auto-
matic transmission INVECS-II 4A/T)
p. 5–21
19 - Ashtray
p. 6–46
20 - Cigarette lighter
p. 6–45
21 - Rear window demister switch
p. 4–19
22 -
Centre accessory box
p. 6–4723 - Heater/Air conditioning*
p. 6–30, 6–36
24 - Audio*
p. 6–2
EB21AMDf
LHD
B21A482t

overview–Instruments and Controls
1-Supplemental restraint system (for passenger’s seat)

p. 3–22
2-Hazard warning flasher switch
p. 4–18
3-Multi centre display
p. 4–24
Digital clock
p. 4–26
4-Ventilators
p. 6–29
5-Combination headlamps, dipper and turn signal
switch
p. 4–12
Headlamp washer switch*
p. 4–17
6-Meter and gauges
p. 4–2
7-Supplemental restraint system (for driver’s seat)

p. 3–22
Horn switch
p. 4–22
8- Windscreen wiper and washer switch
p. 4–15
Rear window wiper and washer switch (Hatchback
only)
p. 4–16
9-Rheostat* (meter illumination control)
p. 4–21
10 -
Headlamp levelling switch
p. 4–1311-Front fog lamp switch*
p. 4–20
12 - Electric remote-controlled outside rear-view mirrors
switch*
p. 5–32
13 - Rear fog lamp switch
p. 4–21
14 - Audio*
p. 6–2
15 - Heater/Air conditioning*
p. 6–30, 6–36
16 - Rear window demister switch
p. 4–19
17 - Centre accessory box
p. 6–47
18 - Cigarette lighter
p. 6–45
19 - Ashtray
p. 6–46
20 - A/T mode change over switch (vehicles with auto-
matic transmission INVECS II 4A/T)
p. 5–21
21 - Gearshift or selector lever
p. 5–14, 5–16
22 - Ignitition switch
p. 5–9
23 - Bonnet release lever
p. 2–8
24 - Auto-speed (cruise) control lever*
p. 5–36
RHD
B21A483t

SEATS AND SEATBELTS
3–15
CAUTION
(1) Any installation of audio equip-
ment or repairs in the vicinity of
the pre–tensioner seat belts or
floor console must be performed
by an authorized MITSUBISHI
dealer. It is important to do so be-
cause the work could affect the
pre–tensioner mechanisms.
(2) If you need to scrap the vehicle,
please consult an authorized
MITSUBISHI dealer. It is important
to do so because unexpected ac-
tivation of the pre–tensioner seat
belts could cause injuries.
NOTE
(1) The pre–tensioner seat belts will be acti-
vated if the vehicle suffers a severe
frontal impact, even if the seat belts are
not worn.
(2) The pre–tensioner seat belts are de-
signed to work only once. After the pre–
tensioner seat belts have been acti-
vated, they must be replaced by an
authorized MITSUBISHI dealer.
Warning lampThe same warning lamp is shared by the
SRS air bags and the pre–tensioner seat
belts.
Refer to the ”SRS warning lamp” on page
3–36.
Force–limiter mechanismsIn the event of a collision, each force–limiter
mechanism will effectively absorb the load
applied to the seat belt so as to minimize the
impact to the passenger.
Child restraintEG20A-Bb
When transporting children in your vehicle,
some type of child restraint system should
always be used according to the size of the
child. This is required by law in most
countries.
The regulations concerning driving with
children in the front seat may differ from
country to country. You are advised to com-
ply with the relevant regulations.
WARNING
(1) When possible, put children in
the rear seat. Accident statistics
indicate that children of all sizes
and ages are safer when properly
restrained in the rear seat rather
than in the front seat.
(2) Holding a child in your arms is no
substitute for a restraint system.
Failure to use a proper restraint
system can result in severe or
fatal injury to your child.
(3) Each restraint device or fixing is
to be used only by one child.

INSTRUMENTS AND CONTROLS
4–24
D92A015d
Multi centre displayED92A-Q
When the ignition switch is in the ”ACC” position, the outside tempera-
ture and clock are displayed in the multi centre display. When the igni-
tion switch is in the ”ON” position, the average fuel consumption is dis-
played besides outside temperature and digital clock.
If your vehicle is equipped with an automatic air conditioning system,
set temperature, blower speed and air flow are displayed. (Refer to
”Automatic air conditioning” on page 6–36.)
A- Outside temperature / Set temperature
*1
B-Blower speed*1
C- Air flow*1
D- Average fuel consumption*2
E- Digital clock
F-DISP button (For vehicles with a MITSUBISHI genuine audio)
G- Display brightness / display unit selection button
*1:Option*2:Average fuel consumption:
For vehicles without MITSUBISHI genuine audio, only average
fuel consumption is displayed.
For vehicles with MITSUBISHI genuine audio, driving range and
average speed can be displayed besides average fuel con-
sumption by pushing the DISP button in the audio unit.
NOTE
(1) The display unit (ex. km or mile) and brightness can be changed
as desired. (Refer to ”Display brightness adjustment/Display unit
selection” on page 4–31.) When the system cannot provide a
definite value for average fuel consumption/driving range/aver-
age speed, it is displayed as ”– – –”.
(2) The figure of the display varies according to the conditions under
which a vehicle is travelling (road conditions, the manner in which
the vehicle is being driven, etc.).
Observe display for reference because the figure of the display
may differ from the actual figure.

INSTRUMENTS AND CONTROLS
4–26
G15B086d
Digital clockEG15BAIeFollowing modes are available for clock adjustment:

MITSUBISHI genuine audio:
“Auto mode” and “Manual mode”

Non genuine audio:
“Manual mode” only
Selection of “Auto mode” or “Manual mode”
(MITSUBISHI genuine audio only)
1. Switch off the audio once by pressing the PWR switch (1).
2. While pressing the CH4 button (2), press the PWR switch (1)
until it beeps.
“CT” displayed: Auto mode
“CT” not displayed: Manual mode
For manual time adjustment, please refer to “Manual mode” below.
Auto mode
(MITSUBISHI genuine audio only)
The automatic adjustment mode can set the local time automatically
by using the signal from the local RDS stations. In this mode, “CT” (A)
(Clock Time: sent with the RDS signal) is shown in the audio display.

INSTRUMENTS AND CONTROLS
4–27
G15B083d
Manual modeThe manual adjustment mode is also available in case the “Auto
mode” shows the incorrect time when the adjacent local RDS stations
are located in a different time zone.
For manual time adjustment, use the procedure below:
1. Switch off the audio once by pressing the PWR switch (1).
2. While pressing the CH4 button (2), press the PWR switch (1)
until it beeps. The “CT” display (A) disappears and this is the
“Manual adjustment mode”.
3. Set the time by pressing the various buttons as described
below.H- To adjust the hour
M- To adjust the minutes
SET - To reset the minutes to zero
10:30 - 11:29 ... Changes to 11:00
11:30 - 12:29 ... Changes to 12:00

INSTRUMENTS AND CONTROLS
4–28
Display mode
ED92G-Ed
For vehicles with a MITSUBISHI genuine
audio, average fuel consumption, driving
range and average speed can be displayed
besides average fuel consumption by push-
ing the “DISP” button in the audio system.
When the ignition switch is turned “ON”, the
display shows the 3 items sequentially (av-
erage fuel consumption, driving range, aver-
age speed) and returns to the original dis-
play that is shown before the ignition switch
was last turned “OFF”.
NOTE
If the DISP button is pressed while the dis-
play is scrolling through the sequence men-
tioned above, the display stops scrolling and
shows the item that was shown before the
ignition switch was last turned to the “OFF”
position.
Type 1
D92G002a
Change of display mode
(for vehicles with a MITSUBISHI
genuine audio system)
Every time the “DISP” button is pressed light-
ly (less than 2 seconds), the display can be
changed.
Average fuel consumption
Driving range

Average speed
Type 2
D92G003a

INSTRUMENTS AND CONTROLS
4–29
D92I001a
Average fuel consumptionED92I-Bc
This value shows the average fuel con-
sumption (in L/100 km or mpg) since the dis-
play was reset. If you reset the display at the
time when you want to start the measure-
ments, average fuel consumption from that
point of time can be displayed.
To reset the display[Vehicles without MITSUBISHI genuine
audio]
Push the button (A) for more than 2 seconds.
Type 1
D92G002a
[Vehicles with MITSUBISHI genuine
audio]
Push the “DISP” button for more than 2 sec-
onds.
NOTE
(1) When the ignition switch is turned on,
the average fuel consumption which
was being displayed when the ignition
switch was previously turned off will be
displayed once again.
(2) Average fuel consumption varies ac-
cording to the conditions under which a
vehicle is travelling (road conditions, the
manner in which the vehicle is being
driven, etc.).
Observe this display for reference be-
cause the fuel consumption display
may differ from the actual fuel consump-
tion.
Type 2
D92G003a