2000 LEXUS GS400 seats

± BODY ELECTRICALTROUBLESHOOTING
BE±13
2314 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
POWER SEAT CONTROL SYSTEM
SymptomSuspect AreaSee page
Both Driver and Passenger Power seats do not operate.
(Door lock does not operate.)1. ALT M±Fuse
2. Wire HarnessBE±21
±
Driver's seat does not operate.
1. P/SEAT (D) Fuse
2. Power Seat Switch (D)
3. Wire HarnessBE±21
BE±167
±
Passenger's seat does not operate.
1. P/SEAT (P) Fuse
2. Power Seat Switch (P)
3. Wire HarnessBE±21
BE±167
±
ºSlide operationº does not operate.
1. Power Seat Switch (D, P)
2. Wire Harness
3. Slide Motor (D, P)BE±167
±
BE±167
ºFront Vertical Operationº does not operate.
1. Power Seat Switch (D, P)
2. Wire Harness
3. Front Vertical Motor (D, P)BE±167
±
BE±167
ºLifter Operationº does not operate.
1. Power Seat Switch (D, P)
2. Wire Harness
3. Lifter Motor (D, P)BE±167
±
BE±167
ºReclining Operationº does not operate.
1. Power Seat Switch (D, P)
2. Wire Harness
3. Reclining Motor (D, P)BE±167
±
BE±167
ºLumbar Support Operationº does not operate.
1. Power Seat Switch (D, P)
2. Wire Harness
3. Lumbar Support Motor (D, P)BE±167
±
BE±167
(D): Driver's Seat
(P): Passenger's Seat
POWER MIRROR CONTROL SYSTEM
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before you proceed with troubleshooting.
w/ Driving Position Memory System:
SymptomSuspect AreaSee page
Both right and left mirrors do not operate.
1. Mirror Switch
2. Wire Harness
3. Body No.2 ECUBE±176
±
DI±820
Only one side of mirror does not operate.
1. Mirror Motor
2. Wire Harness
3. Driver and Passenger Door ECUBE±176
±
DI±856
DI±889
The mirror does not return to the memorized position.
1. Mirror Position Sensor
(Position is not set)
2. Wire Harness
3. Power Seat Control ECU
BE±176
±
DI±683
The memorized position is moved.
1. Mirror Position Sensor
(Position is not set)
2. Wire Harness
BE±176
±

EM0DB±01
A02703
A02715
SST
± ENGINE MECHANICAL (2JZ±GE)CYLINDER HEAD
EM±39
1393 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
DISASSEMBLY
1. REMOVE WATER OUTLET WITH WATER BYPASS
HOSE
Remove the 2 nuts, bolt, water outlet and gasket.
2. REMOVE ENGINE HANGER
3. REMOVE CAMSHAFT POSITION SENSOR
4. REMOVE ECT SENSOR
5. REMOVE VALVE LIFTERS AND SHIMS
HINT:
Store the valve lifters and shims in correct order.
6. REMOVE VALVES
(a) Using SST, compress the valve spring and remove the 2
keepers.
SST 09202±70020 (09202±00010)
(b) Remove the spring retainer, valve spring, valve and
spring seat.
HINT:
Store the valves, valve springs, spring seats and spring retain-
ers in correct order.
(c) Using needle±nose pliers, remove the oil seal.

EM2534
Overall
Length
EM0255
A02709
45° Carbide Cutter
Z00373
Width
P03966
Width 45°
15°
± ENGINE MECHANICAL (2JZ±GE)CYLINDER HEAD
EM±43
1397 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(d) Check the valve overall length.
Standard overall length:
Intake98.29 ± 98.79 mm (3.8697 ± 3.8894 in.)
Exhaust98.84 ± 99.34 mm (3.8913 ± 3.9110 in.)
Minimum overall length:
Intake98.19 mm (3.8657 in.)
Exhaust98.74 mm (3.8874 in.)
If the overall length is less than minimum, replace the valve.
(e) Check the surface of the valve stem tip for wear.
If the valve stem tip is worn, resurface the tip with a grinder or
replace the valve.
NOTICE:
Do not grind off more than the minimum overall length.
7. INSPECT AND CLEAN VALVE SEATS
(a) Using a 45° carbide cutter, resurface the valve seats.
Remove only enough metal to clean the seats.
(b) Check the valve seating position.
Apply a thin coat of Prussian blue (or white lead) to the
valve face. Lightly press the valve against the seat. Do not
rotate the valve.
(c) Check the valve face and seat for the following:

If blue appears 360° around the face, the valve is
concentric. If not, replace the valve.

If blue appears 360° around the valve seat, the
guide and face are concentric. If not, resurface the
seat.

Check that the seat contact is in the middle of the
valve face with the following width:
If not, correct the valve seats as follows:
Intake1.0 ± 1.4 mm (0.039 ± 0.055 in.)
Exhaust1.2 ± 1.6 mm (0.047 ± 0.063 in.)
(1) If the seating is too high on the valve face, use 15°
and 45° cutters to correct the seat.

MA002±06
MA±2
± MAINTENANCEINSIDE VEHICLE
45 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSIDE VEHICLE
GENERAL MAINTENANCE
These are maintenance and inspection items which are considered to be the owner's responsibility.
They can be done by the owner or they can have them done at a service shop.
These items include those which should be checked on a daily basis, those which, in most cases, do not
require (special) tools and those which are considered to be reasonable for the owner to do.
Items and procedures for general maintenance are as follows.
1. GENERAL NOTES

Maintenance items may vary from country to country. Check the owner's manual supplement in which
the maintenance schedule is shown.

Every service item in the periodic maintenance schedule must be performed.

Periodic maintenance service must be performed according to whichever interval in the periodic main-
tenance schedule occurs first, the odometer reading (miles) or the time interval (months).

Maintenance service after the last period should be performed at the same interval as before unless
otherwise noted.

Failure to do even one item an cause the engine to run poorly and increase exhaust emissions.
2. LIGHTS
(a) Check that the headlights, stop lights, taillights, turn signal lights, and other lights are all working.
(b) Check the headlight aiming.
3. WARNING LIGHTS AND BUZZERS
Check that all warning lights and buzzers function properly.
4. HORN
Check that it is working.
5. WINDSHIELD GLASS
Check for scratches, pits or abrasions.
6. WINDSHIELD WIPER AND WASHER
(a) Check operation of the wipers and washer.
(b) Check that the wipers do not streak.
7. WINDSHIELD DEFROSTER
Check that air comes out from the defroster outlet when operating the heater or air conditioner.
8. REAR VIEW MIRROR
Check that it is mounted securely.
9. SUN VISORS
Check that they move freely and are mounted securely.
10. STEERING WHEEL
Check that it has the specified freeplay. Be alert for changes in steering condition, such as hard steering,
excessive freeplay or strange noises.
11. SEATS
(a) Check that all front seat controls such as seat adjusters, seatback recliner, etc. operate smoothly.
(b) Check that all latches lock securely in any position.
(c) Check that the locks hold securely in any latched position.
(d) Check that the head restraints move up and down smoothly and that the locks hold securely in any
latches position.
(e) For folding±down rear seat backs, check that the latches lock securely.
12. SEAT BELTS
(a) Check that the seat belt system such as the buckles, retractors and anchors operate properly and
smoothly.
(b) Check that the belt webbing is not cut, frayed, worn or dameged.

± MAINTENANCEBODY
MA±9
52 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(b) Be sure to deliver a clean car. Especially check:

Steering wheel

Shift lever knob

All switch knobs

Seats